Klarstein Monumenta Extractor Hood User Manual

1. Ruzivo Rwakakosha Chekuchengetedza

Please read this manual carefully before installing and operating your Klarstein Monumenta extractor hood. Keep these instructions for future reference.

• Ita shuwa kuti magetsi emagetsi awandatage matches the rating plate on the appliance.
• Usabvumira vana kushandisa mudziyo.
• Gara uchidzima mudziyo kubva pamagetsi usati wachenesa kana kugadzirisa.
• Usapisa pasi pehodhi yemhando.
• Iva nechokwadi chekufefetedza kwakaringana mukamuri kana hood yemhando yakashandiswa panguva imwe chete negasi kana zvimwe midziyo yekupisa mafuta.
• Mhepo inobuda haifanirwe kubuditswa mugomba rinoshandiswa kupedza hutsi kubva mumidziyo inopisa gasi kana mamwe mafuta.
• Regular cleaning of the grease filter is essential to prevent fire hazards.

2. Chigadzirwa Pamusoroview

The Klarstein Monumenta is a wall-mounted extractor hood designed to efficiently remove cooking fumes and odors from your kitchen. It features a sleek stainless steel design, LED lighting, and a 5-button control panel.

Figure 1: Klarstein Monumenta extractor hood in a kitchen environment.

The hood can operate in two modes:

• Exhaust Air Mode: Fumes are extracted and discharged outside through a ventilation duct.
• Recirculating Air Mode: Fumes are filtered through activated charcoal filters and the purified air is returned to the kitchen.

3. Setup uye Kuiswa

This section provides general guidance for installing your extractor hood. For detailed steps, refer to the included multilingual user manual and consult a qualified installer if necessary.

3.1 Kusunungura uye Zvikamu

Carefully unpack the appliance and check for any damage. Ensure all components are present:

• 1 x Chigadziko cheHood yeCooker
• 1 x Grease Filter (pre-installed or separate)
• 2 x Activated Carbon Filters (for recirculation mode)
• Mounting Hardware (screws, wall plugs, brackets)
• Multilingual User Manual

Figure 2: Components including grease filter and activated carbon filters.

3.2 Kuisa Hood

The Klarstein Monumenta is a wall-mounted canopy hood. Ensure the wall is strong enough to support the weight of the hood (approx. 12.5 kg / 27.5 lbs). Maintain the recommended distance between the cooking surface and the bottom of the hood as specified in local building codes and the detailed manual.

• Mark drilling points on the wall according to the provided template.
• Dhobora maburi woisa mapulagi emadziro.
• Secure the mounting bracket(s) to the wall.
• Carefully lift and attach the hood to the bracket(s).
• Connect the exhaust ducting (for exhaust air mode) or install activated carbon filters (for recirculation mode).
• Batanidza magetsi.

Mufananidzo 3: Zviyero zvechigadzirwa zvekugadzirisa kuronga.

4. Operating Instructions

The Klarstein Monumenta extractor hood features a user-friendly 5-button control panel located on the front.

Figure 4: Control panel and LED lighting.

4.1 Control Panel Mabasa

The control panel typically includes buttons for:

• Simba VAKADZIMA: To switch the hood on or off.
• Sarudzo Yekumhanyisa Fani: Three distinct power levels (1, 2, 3) are available to adjust the extraction rate according to your cooking needs.
• Kuvheneka/KUDZIMWA: To control the integrated LED lighting (2 x 1.5 watts) for illuminating your cooking area.

It is recommended to switch on the extractor hood a few minutes before you start cooking and leave it running for a few minutes after you finish to ensure all fumes and odors are effectively removed.

5. Kuchengeta

Regular maintenance ensures optimal performance and extends the lifespan of your extractor hood. Always disconnect the power supply before performing any maintenance.

5.1 Cleaning the Grease Filter

The aluminum grease filter should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain extraction efficiency. The central front flap can be opened for easy access.

• Remove the grease filter by releasing its latches.
• Wash the filter by hand in hot soapy water or in a dishwasher using a mild detergent.
• Ensure the filter is completely dry before re-installing.

5.2 Replacing Activated Carbon Filters (Recirculation Mode)

If your hood is operating in recirculation mode, the activated carbon filters need to be replaced periodically (typically every 3-6 months, depending on usage) as they cannot be washed. Used filters lose their odor-absorbing capacity.

• Remove the grease filter to access the activated carbon filters.
• Twist or unlatch the old carbon filters to remove them.
• Install new activated carbon filters, ensuring they are securely in place.
• Matching replacement activated charcoal filters are available under item number 10030727.

5.3 Kuchenesa Kunze

Clean the stainless steel exterior with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid harsh chemicals or abrasive pads that could scratch the surface.

6. Kugadzirisa matambudziko

If you encounter issues with your extractor hood, refer to the following common troubleshooting steps:

Kana dambudziko rikaramba riripo mushure mekuedza mhinduro idzi, ndapota taura nerubatsiro rwevatengi veKlarstein.

7. Zvinotsanangurwa

8. Warranty uye Tsigiro

For warranty information, technical support, or service requests, please refer to the warranty card included with your product or contact Klarstein customer service directly. Ensure you have your model number (10039395) and purchase details available when contacting support.

Additional resources, including FAQs and further product documentation, may be available on the official Klarstein website.