Bhuku reMirayiridzo yeRust-Oleum Varathane One-Step Stain & Poly Water-Based

1. Chigadzirwa Pamusoroview

The Rust-Oleum Varathane One-Step Stain & Polyurethane is a water-based product designed to combine the benefits of a wood stain and a protective polyurethane finish into a single application. This formulation provides a deep, rich color and durable protection for various indoor wood surfaces, eliminating the need for multiple product layers. It is suitable for use on furniture, cabinets, trim, and doors.

Varathane One Step Stain + Poly Water Based can in Provincial color, Semi-Gloss finish.

This image displays the product can for Varathane One Step Stain + Poly Water Based. The label clearly indicates 'One Step Stain + Poly', 'Water Based', 'Provincial' color, and 'Semi-Gloss' finish. It also highlights features like 'Rich Even Color', 'Superior Scratch Resistance', and 'Complete Project 5x Faster'.

2. Safety Information

Always read and follow all instructions and safety precautions on the product label before use. This product is for indoor use only.

Ensure adequate ventilation during application and drying. Open windows and doors, or use a fan.
Wear appropriate personal protective equipment, including gloves and eye protection, to prevent skin and eye contact.
Chengetedza kure nevana nemhuka dzinovaraidza.
Do not ingest. If swallowed, call a poison control center immediately.
In case of eye contact, flush thoroughly with water for 15 minutes and seek medical attention.
Dispose of unused product and cleaning materials according to local regulations.

3. Surface Preparation (Setup)

Proper surface preparation is crucial for optimal adhesion and finish quality.

New Wood: Sand the bare wood surface in the direction of the grain until smooth. Begin with 120-grit sandpaper and progress to 220-grit sandpaper. Remove all sanding dust with a vacuum or a tack cloth.
Previously Finished Wood: Ensure the surface is clean, dry, and free of wax, grease, polish, or other contaminants. Lightly sand the existing finish with 220-grit sandpaper to dull the surface and create a profile for adhesion. Remove all sanding dust. If the existing finish is peeling or severely damaged, it should be removed completely.
Condition: Ensure the wood is completely dry before application. Avoid applying in high humidity conditions.

4. Application Instructions (Operating)

Follow these steps for best results:

Sanganisa Zvakakwana: Before and during use, stir the product gently but thoroughly. Do not shake, as this can introduce air bubbles.
Test Area: Always test the product on an inconspicuous area or scrap wood to verify color and adhesion.
Apply First Coat: Apply a thin, even coat using a high-quality synthetic brush or foam applicator. Apply in the direction of the wood grain. Avoid over-brushing.
Bvumira Kuomesa: Allow the first coat to dry completely. Drying time can vary based on temperature and humidity. Refer to the 'Drying and Recoat Times' section.
Light Sanding (Optional): For a smoother finish, lightly sand with 220-grit sandpaper between coats after the previous coat has dried. Remove all sanding dust with a tack cloth.
Apply Additional Coats: Apply subsequent coats as needed to achieve desired color depth and protection. Typically, 2-3 coats are recommended.

5. Drying and Recoat Times

Drying times are approximate and can be affected by temperature, humidity, and film thickness.

Touch Dry: Inenge awa imwe.
Nguva Yokugadzirisa: Anenge maawa 2-3.
Kushandisa Mwenje: Allow 24 hours before light use.
Full Cure: Allow 3-5 days for the finish to fully cure and achieve maximum durability. Avoid placing heavy objects or covering the surface during this period.

6. Cleanup

Clean tools and spills immediately after use.

Clean brushes, applicators, and other equipment with soap and warm water.
Wipe up any spills or drips with a damp cloth before the product dries.

7. Maintenance of Finished Surface

To maintain the beauty and durability of your finished wood surface:

Geza nguva nenguva nekanyoro, damp jira.
Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
Protect the surface from excessive moisture and extreme temperature changes.
Use coasters under beverages and felt pads under furniture to prevent scratches.

8. Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
Uneven Finish / Streaks	Improper application technique, over-brushing, or uneven surface preparation.	Apply thin, even coats. Work in the direction of the grain. Ensure surface is properly sanded and clean.
Bubbles in Finish	Shaking the can, over-brushing, or applying too thickly.	Stir gently, do not shake. Apply thin coats. Use a high-quality applicator.
Slow Drying Time	High humidity, low temperature, or applying too thickly.	Ensure good ventilation. Apply in recommended temperature and humidity ranges. Apply thinner coats.
Poor Adhesion	Improper surface preparation (e.g., oily, waxy, or unsanded surface).	Thoroughly clean and sand the surface as per preparation instructions.

9. Zvigadzirwa zveChigadzirwa

Brand: Rust-Oleum
Zita remuenzanisi: One Step Stain & Polyurethane, Water-Based Semi Gloss
Nhamba Yemhando Yechinhu: 336359
Material: Polyurethane, Water Based
Ruvara: Provincial
Pedzisa: Semi-Gloss
Surface Recommendation: Cabinets, Door, Furniture, Wood
Package Dimensions: 4.8 x 4.33 x 4.21 inches
Chinhu Weight: 2.39 Pondo
ASIN: B0B3F5NJ43
Zuva Rokutanga Kuwanikwa: Chikumi 7, 2022

10. Ruzivo Rwekutsigira

For further assistance, technical support, or product inquiries, please contact Rust-Oleum customer service. Refer to the product packaging for the most current contact information or visit the official Rust-Oleum website.

Mugadziri: Rust-Oleum

Websaiti: www.rustoleum.com (Ndokumbira utarise mukuru website for specific contact details and regional support.)

	Rust-Oleum Fenicha Transformations Low VOC System \| Ruzivo rwehunyanzvi uye Gwaro rekushandisa Ruzivo rwakakwana rwehunyanzvi uye gwara rekushandisa Rust-Oleum Furniture Transformations Low VOC system, kugadzirira pamusoro, deglosser, bond coat, decoration glaze, uye topcoat yekushandisa kuti fenicha igare kwenguva refu.
	Nano Shield Inokurumidza Kuoma Pasi Pakaoma Pepa reData reUnyanzvi \| Rust-Oleum Ruzivo rwakakwana rwehunyanzvi hweNano Shield Fast Dry Floor Stain neRust-Oleum. Runosanganisira zvinhu zvechigadzirwa, gwara rekushandisa, kugadzirira pamusoro, hunhu hwemuviri, kufukidzwa, nguva yekuoma, uye yambiro dzekuchengetedza pasi pemapuranga emukati.
	Rust-Oleum Inomisa Rust Turbo Spray System SRT-44 Technical Data Sheet Pepa reruzivo rwehunyanzvi reRust-Oleum Rinomisa Rust neTurbo Spray System (SRT-44), kusanganisira tsananguro yechigadzirwa, mirairo yekushandisa, uye hunhu hwemuviri. Dzidza nezvekufukidza, nguva yekusanaya kwemvura, uye kugadzirira.
	Kuchinja kweKabhineti yeRust-Oleum: Ruzivo rwehunyanzvi uye Gwaro rekushandisa Ruzivo rwakakwana rwehunyanzvi uye gwara rekushandisa nhanho nhanho reRust-Oleum Cabinet Transformations, sisitimu yekupfekedza makabati yeDIY yekushandura matanda, laminate, uye makabati esimbi. Inosanganisira ruzivo rwechigadzirwa, kugadzirira, kushandisa, uye hunhu hwemuviri.
	Rust-Oleum RockSolid Paver Lock Technical Data Sheet & Application Guide Ruzivo rwakakwana rwehunyanzvi uye mirairo yekushandisa Rust-Oleum RockSolid Paver Lock, chivharo chakagadzirirwa kudzikamisa majoini epaver uye kuwedzera chitarisiko. Chinosanganisira zvinhu zvechigadzirwa, kugadzirira, kushandisa, kufukidzwa, nguva yekuoma, uye hunhu hwemuviri.
	Rust-Oleum Fillcoat Waterproofing Membrane: Technical Specifications Yakadzama tekinoroji yekumisikidza yeRust-Oleum Fillcoat yekudzivirira mvura membrane, inosanganisira mashandisirwo, nguva dzekuomesa, mashandisirwo, uye data rekuchengetedza pamatenga nemateru. Chigadzirwa kodhi: Fillcoat.

Rust-Oleum 336359