1. Nhanganyaya
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Chigadzirwa Pamusoroview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Night Vision: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Nguva Yekukurumidza Yekutangira: 0.1-second trigger speed to capture fast-moving subjects.
- Munda Wakafara we View: 120° wide-angle lens for comprehensive monitoring.
- Durable Design: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Motion Actived: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Setup
- Isa Mabhatiri: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Isa SD Card: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Power On: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Kuisa Kamera:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Operating Instructions
4.1. Mode Selection
The camera has three main modes:
- DZIMA: Dzima kamera.
- Bvunzo: Inokutendera kuti udaro view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- ONI: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Setting | Tsanangudzo | Yakakurudzirwa Value |
|---|---|---|
| Mode | Select Photo, Video, or Photo+Video. | Mufananidzo+Vhidhiyo |
| Mufananidzo Resolution | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32MP |
| Vhidhiyo Resolution | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| PIR Sensitivity | Adjust motion sensor sensitivity (High, Medium, Low). | Pakati |
| Trigger Interval | Time delay between detections (e.g., 5s, 10s, 30s). | 10 Sekondi |
| Nguva Yapera | Capture images at set intervals regardless of motion. | Off |
| Zuva & Nguva | Seta zuva uye nguva yazvino. | Current |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Mufananidzo 4.6: Example of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Kuchengeta
- Kuchenesa: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Kutsiva Bhatiri: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- SD Kadhi Management: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Kuchengeta: When not in use for extended periods, remove batteries and store the camera in a cool, dry place.
6. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Kamera haisi kubatika | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Yakashata mufananidzo/vhidhiyo mhando | Dirty lens; low light conditions; incorrect resolution settings. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Kamera haibatike | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Kadhi reSd kukanganisa | SD card full; incompatible SD card; corrupted SD card. | Delete files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Mufananidzo Resolution | Kusvika ku32MP |
| Vhidhiyo Resolution | Kusvika ku4K |
| rukungiso Speed | 0.1 seconds |
| Night Vision Range | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| PIR Detection Range | Day: 80ft (24m), Night: 65ft (20m) |
| Munda we View | 120° Wide Lens |
| Waterproof Rating | IP66 |
| Operating Temperature | -22°F kusvika 158°F (-30°C kusvika 70°C) |
| Storage | SD Card (up to 256GB, Class 10 or higher) |
| Magetsi | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Display | 2.4'' LCD |
8. Warranty uye Tsigiro
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri website.
Ndapota chengetedza humbowo hwako hwekutenga kwezvichemo zvewaranti.
