Legrand LEG67766

Legrand Micromodule for Connected VMC with Netatmo

Model: LEG67766

1. Nhanganyaya

This instruction manual provides essential information for the safe installation, operation, and maintenance of your Legrand Micromodule for Connected VMC (Ventilation Mécanique Contrôlée) with Netatmo. This micromodule is designed to enable smart control of a single-flow, 2-speed VMC system, with a maximum power rating of 250W. It integrates seamlessly with the Home+Control application and wireless control devices, offering enhanced convenience and energy management for your ventilation system.

Ndapota verenga bhuku iri zvakanaka usati waisa uye washandisa, uye richengete kuti uzorishandisa mune ramangwana.

2. Safety Information

YAMBIRO: Ngozi Yemagetsi Shock

  • Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
  • Always disconnect power at the main circuit breaker before installing, servicing, or removing the device.
  • Do not install or use this device if it appears damaged.
  • Ita shuwa kuti zvese zvinongedzo zvakachengeteka uye zvakavharirwa nemazvo.
  • This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.

3. Package Zviri mukati

Ona kuti pasuru yako ine zvinhu zvinotevera:

  • Legrand Micromodule for Connected VMC
  • White cover (if applicable)
  • Chinyorwa Chirairo (gwaro iri)

4. Setup uye Kuiswa

The Legrand Micromodule is designed to be installed as close as possible to the VMC unit it controls. Professional installation is highly recommended due to the electrical nature of the device.

4.1 Pre-Instalation

  1. Bvisa Simba: Turn off the main power supply to the VMC circuit at your electrical panel. Verify that the power is off using a voltage muedzo.
  2. Ziva Wiring: Identify the power supply wires and the control wires for your 2-speed VMC system. Consult your VMC's manual if necessary.

4.2 Wiring the Micromodule

Follow the wiring diagram provided with the product packaging. Typically, the micromodule will connect to the main power supply and then to the VMC's speed control inputs (e.g., low speed and high speed). Ensure proper grounding.

Legrand Micromodule for Connected VMC with Netatmo, showing its compact design and wiring terminals.

Image 1: Legrand Micromodule for Connected VMC. This image displays the compact design of the micromodule, highlighting its size and the terminals for electrical connections. It is typically installed within an electrical box or near the VMC unit.

4.3 Pairing with Home+Control App

  1. Dzosera Simba: Once wiring is complete and secure, restore power to the circuit.
  2. Dhaunirodha App: Download the Legrand Home+Control application from your device's app store.
  3. Gadzira Akaundi: Vhura iyo app uye gadzira account kana kupinda.
  4. Wedzera Mudziyo: Follow the in-app instructions to add a new device. The app will guide you through the pairing process, which typically involves putting the micromodule into pairing mode (refer to the specific instructions in the app or product leaflet for exact steps, often involving a short press on a button on the module or a specific power cycle sequence).
  5. Gadzira: Once paired, you can configure the VMC speeds and integrate with other Netatmo-compatible devices.

5. Operating the Micromodule

The Legrand Micromodule allows for smart control of your 2-speed VMC system.

5.1 Via Home+Control App

  • Open the Home+Control app on your smartphone or tablet.
  • Navigate to the VMC device.
  • You will typically find options to switch between the two VMC speeds (e.g., 'Low' and 'High' or 'Normal' and 'Boost').
  • The app may also allow for scheduling, automation, and integration with other smart home scenarios.

5.2 Via Wireless Control (Optional)

If you have paired the micromodule with a compatible Legrand wireless control switch, you can operate the VMC speeds directly from the switch. Refer to the instructions provided with your wireless control for specific operation details.

6. Kuchengeta

The Legrand Micromodule is designed for long-term, maintenance-free operation. However, consider the following:

  • Kuchenesa: If the exterior of the module or its cover requires cleaning, ensure power is disconnected. Use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Firmware Dzokorora: Periodically check the Home+Control app for available firmware updates for your micromodule. Updates can improve performance and add new features.
  • VMC Maintenance: Regular maintenance of your VMC system (e.g., filter cleaning/replacement) should be performed according to the VMC manufacturer's instructions.

7. Kugadzirisa matambudziko

If you encounter issues with your Legrand Micromodule, try the following steps:

  • Hapana Simba/Hapana Mhinduro:
    • Check the circuit breaker to ensure power is supplied to the VMC circuit.
    • Verify all wiring connections are secure (only if you are a qualified electrician).
  • Cannot Pair with App:
    • Ensure your smartphone is connected to the same Wi-Fi network as your Netatmo gateway (if applicable).
    • Restart the Home+Control app.
    • Try resetting the micromodule to factory settings (refer to the app or product leaflet for specific instructions).
    • Ensure the micromodule is within range of your Netatmo gateway or Wi-Fi network.
  • VMC Not Changing Speeds:
    • Verify the VMC itself is functioning correctly when directly controlled (if possible).
    • Check the wiring between the micromodule and the VMC's speed inputs.
    • Ensure the micromodule is correctly configured in the Home+Control app.

If problems persist, contact Legrand customer support or consult a qualified electrician.

8. Zvinotsanangurwa

MugadziriLegrand
Model NumberLEG67766
Chikamu NhambaLEG67766
Product Dimensions2.72 x 3.7 x 3.7 inches
Item Weight2.65 ounces
Max Power Rating250W
VMC TypeSingle flow, 2-speed
KugarisanaHome+Control app, Netatmo ecosystem
Mabhatiri AnodiwaAihwa

9. Warranty uye Tsigiro

Legrand products are designed and manufactured to the highest quality standards. For information regarding the warranty period and terms for your Micromodule, please refer to the warranty card included with your product or visit the official Legrand website.

For technical support, troubleshooting assistance, or to report a defective product, please contact Legrand customer service through their official websaiti kana ruzivo rwekusangana rwunopihwa mune yako chigadzirwa zvinyorwa.

Legrand Mukuru Websaiti: www.tanogeme.com

Related Documents - LEG67766

Preview Legrand Wireless Lighting Control (5 742 05/14/23/32) - Installation and User Guide
Detailed information and installation guide for the Legrand Arteor with Netatmo wireless lighting control (model 5 742 05/14/23/32). Learn how to install, pair, and replace the battery for this connected home accessory.
Preview Gwaro rekuisa Legrand Connected Lighting Micromodule 5742 43
Gwaro rekuisa nekushandisa Legrand Arteor ine micromodule yemwenje yakabatana neNetatmo (modheru 5742 43), kusanganisira hunyanzvi hwekugadzira, madhayagiramu ewaya, uye mirairo yekuchengetedza.
Preview Arteor neNetatmo: Smart Home System Chigadzirwa Guide | Legrand
Ongorora iyo Arteor neNetatmo smart imba system naLegrand. Ziva mwenje wakabatana, mapofu, zvigadziko, uye zvigadziriso zvekudzora izwi zvekurarama kwemazuva ano, zvakagadzirirwa kuti zvive nyore kushandisa uye anoyevedza aesthetics.
Preview Guide d'installation et d'utilisation du télérupteur connecté Legrand 412170
Guide détaillé pour l'installation et l'utilisation du télérupteur connecté Legrand 412170, incluant le câblage, la configuration, les specifications techniques et les consignes de sécurité.
Preview Legrand 4 121 73 Connected Dry Contact Installation Guide
Comprehensive installation and user guide for the Legrand 4 121 73 Connected Dry Contact module, detailing its features, wiring requirements, safety precautions, and integration with the Legrand Home + Control smart home ecosystem.
Preview Legrand 2 Gang Connected Switch with Neutral CB0416 - CN0416 - CT0416 Installation Guide
Installation instructions and technical specifications for the Legrand 2 Gang Connected Switch with Neutral (CB0416, CN0416, CT0416), a smart home accessory compatible with Netatmo.