Bhuku rekushandisa reHoco CA104 Telescopic Gravity Car Phone Holder

1. Nhanganyaya

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hoco CA104 Telescopic Gravity Car Phone Holder. Please read this manual carefully before use to ensure proper functionality and safety.

Image 1.1: The Hoco CA104 car phone holder with a smartphone securely held in place, demonstrating its gravity linkage mechanism and adjustable arm.

2. Zvigadzirwa zveChigadzirwa

The Hoco CA104 holder consists of the following main parts:

• Gravity Linkage Clamp: Automatically adjusts to hold the phone when inserted.
• Telescopic Arm: Allows for extension and retraction to adjust distance.
• Chibatanidzwa cheBhora Chinogadziriswa: Enables 360-degree rotation and angle adjustment of the phone.
• Suction Cup Base: Provides secure attachment to flat surfaces like dashboards or windshields.
• Chivharo Chekukiya: Activates the suction cup for firm adhesion.

Mufananidzo 2.1: View of the Hoco CA104 holder, highlighting the suction cup base and the adjustable telescopic arm before phone insertion.

3. Installation Instructions

The Hoco CA104 can be installed on either the car dashboard or windshield.

3.1 Dashboard Installation

1. Chenesa Nzvimbo: Ensure the dashboard surface is clean and dry.
2. Position the Holder: Place the suction cup base on the desired flat area of your dashboard.
3. Chengetedza Suction Cup: Press down firmly on the suction cup while pushing the locking lever downwards to create a vacuum seal.
4. Gadzirisa kona: Use the telescopic arm and ball joint to adjust the holder to your preferred viewing angle. Tighten any adjustment knobs to secure the position.

Image 3.1: The Hoco CA104 holder securely mounted on a car dashboard, providing a stable platform for a smartphone running a navigation application.

3.2 Windshield Installation

1. Chenesa Nzvimbo: Ensure the windshield surface is clean and dry.
2. Position the Holder: Place the suction cup base on the desired area of your windshield.
3. Chengetedza Suction Cup: Press down firmly on the suction cup while pushing the locking lever downwards to create a vacuum seal.
4. Gadzirisa kona: Use the telescopic arm and ball joint to adjust the holder to your preferred viewing angle. Tighten any adjustment knobs to secure the position.

Image 3.2: The Hoco CA104 holder mounted on a car windshield, offering an alternative placement for optimal viewing of a smartphone's display.

4. Operating Instructions

4.1 Kuisa foni yako

1. Ensure the gravity linkage arms are open.
2. Place your phone into the bottom support arms of the holder.
3. As the phone's weight presses down, the side arms will automatically close and secure the phone.

Image 4.1: The Hoco CA104 holder with its gravity linkage arms in the open position, illustrating the mechanism before a phone is placed inside.

4.2 Kubvisa Foni Yako

1. Gently lift your phone upwards from the holder.
2. The gravity linkage arms will automatically release and open, allowing you to remove the phone.

4.3 Kugadzirisa Viewing Angle

• Loosen the knob on the ball joint to adjust the phone's angle (horizontal or vertical) and rotation.
• Loosen the knob on the telescopic arm to extend or retract the arm for optimal distance.
• Tighten all knobs after adjustment to secure the holder's position.

5. Kuchengeta uye Kuchengetedza

• Kuchenesa: Pukuta chibatiso nechinhu chakapfava, damp jira. Usashandise abrasive cleaners kana solvents.
• Suction Cup: If the suction cup loses adhesion, rinse it with warm water and let it air dry. This can restore its stickiness.
• Kuchengeta: When not in use for extended periods, detach the holder and store it in a cool, dry place away from direct sunlight.
• Tembiricha: Avoid exposing the holder to extreme temperatures, as this may affect the material integrity.

6. Kugadzirisa matambudziko

7. Zvigadzirwa zveChigadzirwa

• Muenzaniso: CA104
• Material: ABS, Silicone
• Surface Technology: Sun pattern oil spray
• Dimensions: 100 x 95 x 170 mm
• Kurema 151 g
• Inoenderana Saizi Yefoni: 4.5 - 7.0 inches
• Clamp Range: 60 - 85 mm
• Inoshanda Scenes: Car dashboard, windshield
• Special Features: Telescopic arm, vertical and horizontal adjustment, gravity linkage