Bhuku reMirayiridzo yeBravilor Bonamat HWA 14 Hot Water Dispenser

1. Nhanganyaya

Thank you for choosing the Bravilor Bonamat HWA 14 Hot Water Dispenser. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and keep it for future reference.

2. Mirayiridzo Yekuchengetedza

To ensure safe operation and prevent damage to the appliance or injury to users, please observe the following safety precautions:

• Kuchengetedzwa Kwemagetsi: Always connect the dispenser to a grounded power outlet. Do not operate with a damaged power cord or plug. Keep the power cord away from hot surfaces.
• Hot Surfaces and Water: The dispenser produces hot water and surfaces may become hot during operation. Exercise extreme caution to avoid burns. Do not touch hot surfaces directly.
• Mwero wemvura: Never operate the dispenser without sufficient water in the tank. This can cause damage to the heating element.
• Kuchenesa: Disconnect the power supply before cleaning. Do not immerse the appliance in water or other liquids. Use only recommended cleaning agents.
• Vana uye Kutarisira: Chishandiso ichi hachina kuitirwa kuti chishandiswe nevanhu (kusanganisira vana) vane masimba emuviri, pfungwa kana pfungwa dzakadzikira, kana kushaya ruzivo neruzivo, kunze kwekunge vapihwa tarisiro kana kuraira maererano nekushandiswa kwemudziyo nemunhu ane mutoro wekuchengetedza kwavo. Vana vanofanira kutariswa kuti vaone kuti havasi kutamba nemudziyo wacho.
• Kugadzirisa: Do not attempt to repair the appliance yourself. All repairs should be performed by qualified service personnel.

3. Chigadzirwa Pamusoroview

The Bravilor Bonamat HWA 14 is a robust and efficient hot water dispenser designed for various applications. Familiarize yourself with its main components:

3.1 Zvikamu

• Main Unit (Housing)
• Water Tank (internal, 13.1 L capacity)
• Dispensing Tap
• Drip Tray
• Power Switch / Indicator Lights
• Power Cord

3.2 Chigadzirwa Views

Mufananidzo 1: Mberi view of the Bravilor Bonamat HWA 14, showing the main body, dispensing tap, and drip tray.

Mufananidzo 2: Angled view of the dispenser, highlighting its compact design and side panel.

Mufananidzo 3: Side view of the dispenser, illustrating its depth and overall dimensions.

4. Setup

4.1 Kusunungura

1. Bvisa chirongo chinopa mushonga nekungwarira kubva mupakeji yacho.
2. Bvisa zvinhu zvese zvekurongedza, kusanganisira chero mafirimu ekudzivirira kana matepi.
3. Inspect the appliance for any signs of damage. If damaged, do not use and contact your supplier.

4.2 Kuiswa

• Place the dispenser on a stable, level, and heat-resistant surface.
• Ensure adequate ventilation around the unit. Do not place it directly against a wall or in an enclosed cabinet.
• Keep the dispenser away from direct sunlight, heat sources, and areas with high humidity.
• Ensure the power outlet is easily accessible.

4.3 Kutanga Kuchenesa

1. Before first use, clean the water tank and dispensing tap.
2. Fill the tank with clean water and dispense a few liters to flush the system. Discard this water.
3. Pukuta kunze ne adamp jira.

5. Operating Instructions

5.1 Kuzadza Tangi reMvura

1. Ensure the dispenser is unplugged or powered off.
2. Vhura chivharo chetangi remvura.
3. Fill the tank with fresh, cold drinking water up to the maximum fill line. Do not overfill.
4. Vhara chivharo zvakachengeteka.

5.2 Kubatidza

1. Batanidza tambo yemagetsi mudura remagetsi rakadzika.
2. Batidza switch huru yemagetsi, inowanzo kuwanikwa kumashure kana kudivi reyuniti.
3. The indicator light will illuminate, signaling that the heating process has begun. The water will heat to the optimal temperature. This may take several minutes depending on the initial water temperature and tank capacity.

5.3 Kupa Mvura Inopisa

1. Once the water has reached the desired temperature (indicated by a change in the indicator light or a ready signal), place a cup or container under the dispensing tap.
2. Press or pull the dispensing lever/button to release hot water.
3. Release the lever/button to stop the flow.
4. Yambiro: Hot steam may be released during dispensing.

5.4 Kudzima

• When not in use for extended periods, turn off the main power switch.
• Bvisa mudziyo wekupa magetsi kubva pamagetsi.

6. Kuchengeta

Kugadziriswa nguva dzose kunovimbisa kugara kwenguva refu uye kushanda zvakanaka kwemuchina wako wemvura inopisa.

6.1 Kucheneswa Kwezuva Nezuva

• Bvisa uye kuchenesa tireyi yekudonha nguva nenguva.
• Pukuta nzvimbo dzekunze nekanyoro, damp jira. Usashandise abrasive cleaners kana solvents.
• Clean the dispensing tap with a soft brush or cloth to remove any residue.

6.2 Kudzikisira

Depending on water hardness, limescale can build up inside the tank and heating elements. Descale the unit regularly (e.g., every 1-3 months) using a suitable descaling agent for hot water appliances. Follow the descaling agent's instructions carefully.

1. Ensure the dispenser is unplugged and cooled down.
2. Prepare the descaling solution according to the product instructions.
3. Dururira mhinduro mumvura yemvura.
4. Allow it to sit for the recommended time.
5. Drain the solution completely.
6. Rinse the tank thoroughly by filling and draining with fresh water several times to remove all descaling residue.

6.3 Kuchengeta

If storing the dispenser for an extended period, ensure it is clean, dry, and empty of water. Store it in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Kugadzirisa matambudziko

Tarisa kutafura iri pasi apa kune zvinowanzoitika uye mhinduro dzadzo. Kana dambudziko rikaramba riripo, bata rutsigiro rwevatengi.

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

For warranty information and customer support, please refer to the documentation provided with your purchase or contact your local Bravilor Bonamat distributor. Keep your proof of purchase for any warranty claims.

For further assistance, visit the official Bravilor Bonamat websaiti kana kubata dhipatimendi ravo rebasa revatengi.