1. Mirayiridzo Yekuchengetedza
Read all safety warnings and instructions carefully before operating the pump. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the pump from the power supply before performing any maintenance or cleaning.
- Ita shuwa kuti magetsi emagetsi awandatage matches the pump's specifications (230V).
- Do not operate the pump with a damaged power cord or plug. If damaged, contact qualified personnel for repair.
- Never lift or carry the pump by its power cord. Use the integrated handle.
- Chengeta vana nevanhu vasina mvumo kure nepombi yekushandisa.
- The pump is designed for pumping water only. Do not use it for flammable, corrosive, or explosive liquids.
- Ensure the pump is fully submerged during operation to prevent overheating.
- The pump is rated IPX8 for water resistance, suitable for continuous submersion.
2. Chigadzirwa Pamusoroview
The VEVOR 3.0HP/2200W Submersible Sump Pump is designed for efficient drainage of clean and dirty water from various locations such as basements, pools, hot tubs, and garden ponds. It features a robust construction and an automatic float switch for hands-free operation.
Image: The VEVOR submersible pump is suitable for multiple applications, including draining flooded areas, pools, and ponds.
Zvinokosha:
- Kuita Kwakasimba: Equipped with a 2200W (3 HP) motor, capable of pumping up to 1000 liters per minute (60,000 L/hour) and lifting water vertically up to 18 meters (60 feet).
- Durable Construction: Features a corrosion-resistant cast iron base and a sturdy stainless steel body for long-lasting use in submerged conditions. It holds an IPX8 waterproof rating and CE certification.
- Automatic Operation: An integrated tethered float switch automatically starts and stops the pump based on water levels, providing convenient, hands-free drainage.
- Efficient Drainage: Designed with a 7.6 cm (3 inch) discharge outlet for high flow rates and can pass solids up to 2 cm (0.8 inch) in diameter.
- Dhizaini Yakanakira Mushandisi: Includes a 10-meter (33 feet) waterproof power cord and an ergonomic handle for easy transport and connection.
Image: Visual representation of the pump's powerful performance metrics and features like ultra-quiet operation and overload protection.
Image: Breakdown of the pump's corrosion-proof materials and durable components, including the IPX8 waterproof rating.
3. Zvinotsanangurwa
| Tsanangudzo | Value |
|---|---|
| Model | 3.0HP Sump Pump |
| Simba | 2200W / 3 HP |
| Voltage | 230V (220-240V 50/60Hz) |
| Max. Kuyerera Rate | 1000 L/min (60,000 L/hour / 264 GPM) |
| Max. Simudza Kureba | 18 m (60 ft) |
| Max. Kudzika Kwemvura | 10 m (33 ft) |
| Max. Solid Passage | 2 masendimita (0.8 inchi) |
| Discharge Outlet Diameter | 7.6 masendimita (3 inchi) |
| Tembiricha Yemvura Range | 0-40°C (32-104°F) |
| Dziviriro Type | IPX8 |
| Power Cord Kureba | 10 m (33 ft) |
| Zviyero zveChigadzirwa (L x W x H) | 30 x 20 x 52 masendimita (11.8 x 7.9 x 20.5 inches) |
| Product Weight | 25.9 kg |
| Material | Kanda Simbi, Stainless Simbi |
Image: Detailed specifications and dimensional overview of the VEVOR sump pump.
4. Setup
4.1 Kuburitsa uye Kuongorora
- Nyatsobvisa pombi uye zvese zvekushandisa kubva pakurongedzerwa.
- Inspect the pump for any signs of damage during transit. Do not use if damaged.
- Ita shuwa kuti zvese zvikamu zvakanyorwa mupakeji zviripo.
4.2 Kubatanidza Hose yeDischarge
- Attach a suitable discharge hose (with a 7.6 cm / 3 inch diameter) to the pump's outlet. Secure it firmly with a hose clamp (hazvina kusanganisirwa) kudzivirira kubuda kwemvura.
- Ensure the hose is routed without kinks or sharp bends to maintain optimal flow.
4.3 Positioning the Pump
- Place the pump on a stable, level surface in the area to be drained. Avoid placing it directly on soft mud or sand, which could block the intake.
- Ensure the pump is fully submerged in water before operation. The maximum submersion depth is 10 meters (33 feet).
4.4 Adjusting the Float Switch
- The float switch controls the automatic on/off function of the pump. Adjust the length of the float switch cable to set the desired water levels for activation and deactivation.
- A shorter cable length will result in the pump activating at a lower water level and deactivating sooner. A longer cable length will allow the water level to rise higher before activation and drain more water before deactivation.
- Ensure the float switch can move freely without obstruction.
Image: Installation guide illustrating maximum submersion depth, acceptable water temperature, solid particle size, power cord length, and discharge diameter.
5. Operating Instructions
5.1 Otomatiki Kushanda
- Once the pump is positioned and the discharge hose is connected, plug the power cord into a grounded electrical outlet (230V).
- Pombi iyi inotanga yoga kana mvura yakwira yosimudza switch inoyangarara.
- The pump will automatically stop when the water level drops and the float switch falls to its lower position.
- Ensure the water temperature remains within the specified range of 0-40°C (32-104°F).
Image: Explanation of the automatic tethered float switch operation, showing pump activation and deactivation based on water level.
5.2 Kushanda Nemaoko (kana zvichibvira)
While the pump is primarily designed for automatic operation via the float switch, ensure the float switch is always free to move. For continuous pumping, the float switch must remain in the 'on' (floating) position. However, continuous manual monitoring is recommended to prevent dry running.
6. Kuchengeta
Kugadzirisa nguva dzose kunoita kuti pombi ishande zvakanaka uye kunoita kuti pombi irambe ichishanda kwenguva refu. Gara uchibvisa simba usati wagadzirisa.
6.1 Kuchenesa Pombi
- Periodically clean the pump's intake screen to remove debris, leaves, or other particles that may obstruct water flow.
- Rinse the pump with clean water after use, especially if pumping dirty or muddy water.
6.2 Kuongorora Zvikamu
- Check the power cord and plug for any signs of damage, cuts, or fraying. Replace if necessary.
- Ensure the float switch moves freely and is not obstructed by debris.
- Inspect the discharge outlet and impeller area for any blockages.
6.3 Winterization (yemamiriro ekunze anotonhora)
- If the pump is used in an area where temperatures drop below freezing, remove it from the water before winter.
- Clean the pump thoroughly and store it in a dry, frost-free location.
7. Kugadzirisa matambudziko
Before attempting any repairs, always disconnect the pump from the power supply.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Pombi haina kutanga | Hapana magetsi Float switch not activated Thermal overload protection yakavhurwa Motor kukanganisa | Tarisa kubatana kwemagetsi uye chinopwanya dunhu Ensure water level is high enough to lift float switch Rega pombi itonhore; tarisa kana paine kuvharika Bata rutsigiro rweVEVOR |
| Pombi inomhanya asi hapana mvura inopombwa | Intake screen blocked Discharge hose kinked or blocked Air lock Impeller yakakuvadzwa | Clean intake screen Clear obstructions from hose Lift and lower pump slightly to release air Bata rutsigiro rweVEVOR |
| Kuderera kwekuyerera | Partial blockage in intake or discharge Pombi isina kunyura zvizere Excessive lift height or hose length | Clean intake screen and check hose Ensure pump is adequately submerged Verify installation meets specifications |
| Pombi inotenderera kakawanda | Float switch kugadzirisa Small volume of water being drained | Adjust float switch cable length to increase on/off differential This may be normal for small water volumes |
8. Warranty uye Tsigiro
For warranty information, technical support, or spare parts inquiries, please contact VEVOR customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Note: Information regarding spare parts availability is not provided in the product specifications.