Nhanganyaya
Thank you for choosing the Linkind Outdoor Solar Motion Sensor Light. This product is designed to provide efficient and reliable outdoor illumination for your garden, pathway, garage, or porch. Featuring 1000LM brightness, 24 high-power LEDs, dual color temperatures (3000K Warm White & 6500K Cool White), and three intelligent operating modes, these IP67 waterproof lights offer enhanced security and ambiance. Please read this manual carefully before installation and use to ensure optimal performance and longevity.
Image: The Linkind solar light installed, casting a warm glow on a garden path at night.
Safety Information
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Do not install the light near other strong light sources, as this may interfere with the motion sensor or automatic dusk-to-dawn operation.
- Chengetedza solar panel yakachena kubva kuguruva, tsvina, uye marara kuti urambe uchichaja zvakanaka.
- This product is IP67 waterproof, designed to withstand various weather conditions, but avoid submerging it in water.
- Usaedze kupatsanura kana kugadzirisa chigadzirwa, sezvo izvi zvichizobvisa garandi uye zvinogona kukonzera kukuvara.
- Chengetedza pasingasvikirwi nevana.
Package Zviri mukati
Ndokumbira utarise pasuru kuti uve nechokwadi chekuti zvikamu zvese zviripo:
- Linkind Outdoor Solar Motion Sensor Light (x2)
- Ground Stake (x2)
- Wall Mounting Screws and Anchors (x2 sets)
- Mushandisi Chinyorwa (gwaro iri)
Product Features
- Kupenya Kwepamusoro: Equipped with 24 high-power LEDs, delivering up to 1000 lumens of bright illumination.
- Dual Color Temperature: Offers both 3000K Warm White and 6500K Cool White light options to suit different preferences and environments.
- Motion Sensor: Advanced motion detection with a range of 3-8 meters and a 120° detection angle, ensuring light activates when needed.
- Matatu Operating Modes: Customizable lighting modes for various scenarios (details in Operating Instructions).
- IP67 Isingapindi Mvura Chiyero: Designed to withstand harsh weather conditions, including rain, snow, and extreme temperatures.
- High Efficiency Solar Panel: Monocrystalline silicon solar panel with a 22% conversion rate for fast and efficient charging.
- 2-in-1 Installation: Versatile design allows for both ground insertion and wall mounting.
- Adjustable Angle: Light head can be adjusted vertically by 90° and horizontally by 270° for precise lighting direction.
Image: Feature comparison highlighting Linkind's cool & warm white, motion sensor, 1800mAh battery, 1000 lumens, and monocrystalline silicon solar panel.
Image: The solar light demonstrating its IP67 waterproof, frostproof, and heatproof capabilities under a water splash.
Mufananidzo: Yakadzama view of the solar light's 24 LEDs and unique optical lens, emphasizing high charging efficiency and long illumination.
Image: A person and their dog walking past the solar light, illustrating its sensitive motion detection with a 3-8m range and 120° angle.
Setup uye Installation
The Linkind solar light offers two installation options: ground insertion or wall mounting.
Ground Insertion
- Sarudza Modhi: Before assembly, press the power button on the back of the light to select your desired operating mode (see Operating Instructions for details).
- Unganidza Mubati: Attach the light unit to the top part of the ground stake.
- Connect Spikes: Connect the two spike sections of the ground stake together.
- Isa muGround: Firmly insert the assembled light and stake into soft ground in a location that receives ample zuva rakananga.
Kuiswa Kwemadziro
- Sarudza Modhi: Before assembly, press the power button on the back of the light to select your desired operating mode.
- Fix the Holder: Use the provided screws and anchors to securely fix the wall mounting bracket to a desired wall or fence.
- Connect the Two Parts: Attach the light unit to the wall mounting bracket.
- Gadzirisa Angle: Adjust the angle of the solar panel and light head to ensure optimal sunlight exposure and lighting direction.
Image: Visual instructions for both ground insertion and wall mounting methods.
Operating Instruction
The Linkind solar light features a single button to cycle through its three operating modes and to switch between warm and cool white light.
Kuchinja Kwemavara Tembiricha
To switch between 3000K Warm White and 6500K Cool White, dzvanya bhatani remagetsi kwenguva 3 masekonzi.
Cycling Through Modes (Short Press)
- Mamiriro 1: Keeps dim light all night. The motion sensor does not react in this mode.
- Mamiriro 2: Dim light when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
- Mamiriro 3: Light is off when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
Image: Visual representation of the three lighting modes: always dim, dim with motion-activated bright, and off with motion-activated bright.
Maintenance
- Chenesa Solar Panel: Pukuta solar panel nguva dzose ne soft, damp cloth to remove dust, dirt, or snow. A clean panel ensures maximum charging efficiency.
- Tarisa Kuiswa: Periodically check that the light's location still receives adequate direct sunlight, especially after seasonal changes or new foliage growth.
- Ongorora Zvakaipa: Occasionally inspect the light for any physical damage or loose connections.
- Bhatiri: The built-in Lithium-ion battery is designed for long life. Do not attempt to replace it yourself.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chiedza hachibatiki usiku. | Kusawana chiedza chezuva chakakwana masikati. Solar panel yakasviba. Light is in "OFF" mode (Mode 3 without motion). Bhatiri rapera. | Relocate the light to an area with more direct sunlight. Chenesa solar panel. Press the power button to cycle to Mode 1 or Mode 2. Allow 1-2 sunny days for the battery to fully charge. |
| Light flickers or has low brightness. | Partial charge of battery. Solar panel is partially obstructed or dirty. | Ensure full sunlight exposure for several hours. Chenesa solar panel uye bvisa chero zvipingamupinyi. |
| Motion sensor haisi kushanda. | Light is in Mode 1 (always dim). Sensor yakavharika. External light interference. | Switch to Mode 2 or Mode 3. Clear any debris or objects blocking the sensor. Relocate the light away from other strong light sources. |
| Chiedza chemavara hachichinji. | Kudzvanya bhatani zvisiri izvo. | Ensure you are long-pressing the power button for 3 seconds to switch between warm and cool white. |
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Linkind |
| Model Number | LL1801131 |
| Light Source | 24 LED |
| Luminous Flux | 1000 Lumens |
| Rudzi Tembiricha | 3000K Ichena Inodziya & 6500K Ichena Inotonhorera |
| Motion Sensor Detection Range | 3-8 mamita |
| Motion Sensor Detection Angle | 120° |
| IP Rating | IP67 |
| Simba Source | Solar Powered |
| Bhatiri Type | 1 Lithium-ion (inosanganisirwa) |
| Solar Panel Kubudirira | 22% Conversion Rate (Monocrystalline Silicon) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Zviyero zveChigadzirwa (L x W x H) | 15.4 x 4.8 x 10.1 masendimita (6.06 x 1.89 x 3.98 inches) |
| Item Weight | 600 g (1.32 lbs) |
Image: Detailed diagram illustrating the dimensions, adjustable angle, motion sensor, and PET surface layer of the solar light.
Warranty uye Support
For warranty information and customer support, please refer to the product packaging or contact Linkind customer service directly through their official website or the retailer where the product was purchased. Please have your model number (LL1801131) and purchase details ready when contacting support.
