Nhanganyaya
The CAD Audio WX1000HH is a frequency agile UHF wireless handheld microphone system designed for clear and reliable audio transmission. Operating in the 510-570mHz frequency band, it offers 100 selectable channels to ensure optimal signal clarity and minimize interference. This system features convenient auto-scan and IR sync functions for quick setup and channel changes. Built with durable all-metal construction, the WX1000HH is suitable for various demanding environments. This manual provides essential information for setting up, operating, and maintaining your wireless microphone system.
Package Zviri mukati
Ndokumbira utarise kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako:
- WX1000HH Handheld Microphone Transmitter
- WX1000 UHF Wireless Receiver
- Adapta yeMagetsi yeMugamuchiri
- Maikorofoni Clip
- Rack Mount Hardware
- Antenna Relocation Kit
- Audio Cable (likely 1/4" TS to 1/4" TS or XLR to 1/4" TS)
- Mushandisi Chinyorwa (gwaro iri)
Mufananidzo 1: All components of the CAD Audio WX1000HH system, including the handheld microphone, receiver, power adapter, microphone clip, rack mount hardware, antenna relocation kit, and an audio cable.
Gadzirira
1. Kugadzika kweMugamuchiri
- Kuiswa: Position the WX1000 receiver on a stable, flat surface or install it into a standard equipment rack using the included rack mount hardware. Ensure adequate ventilation around the unit.
- Antenna Connection: Connect the included antennas to the ANT connectors on the rear panel of the receiver. If rack-mounting, use the antenna relocation kit to position the antennas for optimal reception.
- Power Connection: Connect the supplied power adapter to the DC INPUT on the rear of the receiver and then plug it into a suitable AC power outlet.
- Audio Output: Connect the receiver's audio output (Balanced XLR or Unbalanced 1/4" TS) to your mixer, amplifier, or PA system using an appropriate audio cable.
Mufananidzo 2: The WX1000 UHF Wireless Receiver shown with rack mount ears attached, ready for installation into an equipment rack.
Mufananidzo 3: Rear panel of the WX1000 receiver, showing the ANT connectors, Balanced XLR output, Unbalanced 1/4" TS output, and DC INPUT for power.
2. Handheld Microphone Setup
- Kuisa Battery: Unscrew the bottom cap of the handheld microphone. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
- Chivharo Chakachengeteka: Screw the bottom cap back onto the microphone securely.
Mufananidzo 4: The CAD Audio WX1000HH handheld microphone with its bottom cap removed, revealing the battery compartment for two AA batteries.
Operating Instruction
1. Powering On / Off
- Receiver: Press the Power button on the front panel of the receiver. The display will illuminate.
- Handheld Maikorofoni: Press and hold the power button on the microphone body until the display illuminates.
2. Channel Selection and Synchronization (IR Sync)
The WX1000HH system features 100 switchable UHF frequencies and an auto-scan function to find clear channels. Up to 20 systems can be used simultaneously.
- Kuskena otomatiki: On the receiver, press the "SET" button to initiate an auto-scan. The receiver will search for and select an available, interference-free frequency.
- IR Sync: Once the receiver has selected a frequency, align the IR window on the handheld microphone with the IR sensor on the receiver (usually near the display). Press the "IR Sync" or "SET" button on the receiver (refer to receiver display for specific prompt). The frequency information will be transmitted to the microphone, synchronizing the two units.
- Verification: Confirm that the frequency displayed on the microphone matches the frequency on the receiver.
Mufananidzo 5: Close-up of the CAD Audio WX1000HH handheld microphone's display, showing frequency and battery level indicators.
3. Zviratidzo zveBattery Level
Both the handheld microphone transmitter and the receiver feature battery level indicators. Monitor these indicators to ensure uninterrupted operation. The handheld microphone provides over 12 hours of operation with two AA batteries.
4. Operating Range
The system offers an operating range of up to 295 feet (90 meters) between the transmitter and receiver under optimal conditions. Environmental factors, obstacles, and other wireless devices can affect this range.
5. Recommended Uses
This system is suitable for various applications including singing, speech, and karaoke.
Maintenance
- Kuchenesa: Use a soft, dry cloth to clean the exterior of the receiver and microphone. Do not use liquid cleaners or solvents.
- Kutsiva Bhatiri: Replace AA batteries in the handheld microphone when the low battery indicator appears. Always use fresh, high-quality batteries. Remove batteries if the microphone will not be used for an extended period.
- Kuchengeta: Chengeta sisitimu iyi munzvimbo inotonhorera, yakaoma kure nezuva rakananga uye tembiricha yakanyanya.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Hapana ruzha kubva kumakrofoni |
|
|
| Kupindira kana kusamira zvakanaka |
|
|
| Short operating range |
|
|
Zvinotsanangurwa
| Model | WX1000HH |
| Maikorofoni Fomu Factor | Handheld |
| Frequency Band | UHF (510-570 MHz) |
| Nhamba yeChannels | 100 (Frequency Agile) |
| Operating Range | Kusvika 295 tsoka (90 metres) |
| Simba reMaikorofoni | 2 x AA Mabhatiri |
| Hupenyu hweMakrofoni yeBhatiri | >12 Maawa |
| Material | Metal (Receiver), Metal (Microphone) |
| Chiratidzo-ku-Ruzha Ratio | 75 dB |
| Kubatana Technology | XLR (Balanced), 1/4" TS (Unbalanced) |
| Zviyero zveChigadzirwa (Mugamuchiri) | 12.1 x 2.8 x 16 inches (L x W x H) |
| Item Weight | 4 pounds (System) |
| UPC | 631922109757 |
Warranty uye Support
For warranty information and technical support, please refer to the official CAD Audio websaiti kana kubata basa ravo revatengi zvakananga. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kune chero vimbiso yewaranti.
CAD Audio Official Websaiti: www.cadaudio.com
