1. Nhanganyaya
Thank you for choosing the Waleaf 500lbs Big and Tall Executive Office Chair. This manual provides essential information for the safe assembly, correct operation, and proper maintenance of your new office chair. Please read these instructions thoroughly before assembly and retain them for future reference.
2. Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or damaged.
- Follow assembly instructions carefully. Incorrect assembly can lead to instability and injury.
- Do not stand on the chair. Use it only for sitting.
- Usapfuure huremu hwepamusoro hwe500 mapaundi.
- Keep children away from the chair during assembly. Small parts may pose a choking hazard.
- Nguva nenguva tarisa mabhaudhi ese nemasikuruu kuti uve nechokwadi chekuti akasimba. Sungazve kana zvichidikanwa.
3. Zvikamu List
Before beginning assembly, verify that all components are included in your package:
- Kudzoka shure
- Seat Cushion
- Nzvimbo dzekuzorora maoko (kuruboshwe nekururudyi)
- Chair Base
- Mavhiri (Mavhiri)
- Gasi Simudza Cylinder
- Mechanism Plate
- Lumbar Support Knob
- Hardware Pack (Screws, Washers, Allen Wrench)
4. Mirayiridzo yeGungano
Please follow these steps carefully for proper assembly. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Batanidza Casters kune Base: Insert each caster into the holes at the end of each leg of the chair base. Push firmly until they click into place.
Image: The sturdy five-star base with silent rubber wheels installed.
- Isa Gas Lift: Isa silinda yekusimudza gasi muburi repakati pechigaro chakabatanidzwa.
- Batanidza Purati yeMechanism paChigaro: Align the mechanism plate with the screw holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws using the provided Allen wrench.
- Batanidza maArmrests paChigaro: Secure the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet.
- Isa musana wechigaro nezvombo zvemaoko: Align the backrest with the seat and armrests. Secure the backrest to the seat and then fully tighten all screws on the armrests and backrest.
- Batanidza Chigaro Chekugara kuGas Lift: Isa chigaro chakaungana pamwe nechekumashure zvakanyatsonaka pa silinda inosimudza gasi, uchiita shuwa kuti chakamira pakati uye chakasimba.
5. Operating Instructions
Your Waleaf Executive Office Chair offers several adjustable features for personalized comfort.
5.1. Height Adjustment
To adjust the chair height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the chair. To raise the chair, stand up slightly and pull the lever up. Release the lever at your desired height.
5.2. Lumbar Support Adjustment
The chair features an adjustable ergonomic lumbar support. Rotate the lumbar support knob, typically located on the side of the backrest or beneath the seat, to modify the level of support to fit your lower back curve.
Image: Visual representation of the adjustable lumbar support mechanism and control knob.
5.3. Kugadzirisa Kutsvedza Uye Kukotama
The backrest angle can be adjusted between 90° and 120°. Use the rocking control knob, usually located on the underside of the seat, to set your preferred tilt resistance. Pull the lever (often the same as the height adjustment lever) outwards to unlock the tilt function, allowing the chair to recline. Push the lever inwards to lock the chair in an upright or reclined position.
Image: The chair demonstrating its recline capability from 90 to 120 degrees.
5.4. Basa reKutenderera
The chair features a 360° free swivel for ease of movement and access to your workspace.
6. Kuchengeta
6.1. Kuchenesa
The breathable PU leather material is easy to clean. Wipe clean with a damp jira. Dzivisa kushandisa makemikari ane hasha kana abrasive cleaners, sezvo izvi zvinogona kukuvadza zvinhu.
6.2. Inspection
Periodically inspect all screws, bolts, and moving parts to ensure they are secure and functioning correctly. Tighten any loose fasteners. Check casters for debris and clean if necessary to maintain smooth rolling.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chigaro hachigadzirise kukwirira | Kusashanda zvakanaka kwesilinda yekusimudza gasi kana kuti lever isina kushanda. | Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift may need replacement. |
| Chigaro chinozunguzika kana kunzwa chisina kugadzikana | Loose screws kana kusaenzana kusangana. | Tarisa wosimbisa masikuruu ese ekubatanidza. Iva nechokwadi chekuti chigaro chiri panzvimbo yakati sandara uye yakaenzana. |
| MaCaster haatendereri zvakanaka | Marara ari mumakasta kana macasta akakuvara. | Bvisa bvudzi kana marara kubva pamavhiri ecaster. Kana akakuvara, macaster angada kutsiviwa. |
| Nzvimbo yekumashure haitsiki kana kukiya | Tilt lock lever not engaged or tilt mechanism issue. | Ensure the tilt lock lever is properly engaged or disengaged. Adjust the tilt tension knob. |
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Waleaf |
| Model Name | CJG001 |
| Color | Bhurawuni |
| Product Dimensions | 29.9"D x 25.2"W x 48"H |
| Maximum Weight Recommendation | 500 Pondo |
| Special Feature | Inogadziriswa Lumbar Support |
| Back Style | Vhura Kumashure |
| Material | Premium PU Leather, High-Density Foam |
| Casters | Silent Rubber Wheels |
| Reclining Position Count | Adjustable between 90° and 120° |
| Item Weight | 61.7 makirogiramu |
9. Warranty uye Tsigiro
Waleaf is committed to providing quality products and excellent customer service. While specific warranty details are not provided in this manual, your product is covered by a standard manufacturer's warranty against defects in materials and workmanship.
For any questions, concerns, or assistance with your Waleaf Executive Office Chair, please contact our customer support team. Refer to your purchase documentation or the retailer's websaiti yeruzivo rwekusangana.