HYCHIKA 3.6V Cordless Electric Rechargeable Screwdriver Drill Set User Manual

1. Nhanganyaya

This user manual provides essential information for the safe and efficient operation of your HYCHIKA 3.6V Cordless Electric Rechargeable Screwdriver Drill Set. Please read this manual thoroughly before first use and keep it for future reference.

The HYCHIKA 3.6V Cordless Electric Screwdriver is designed for various screwing and light drilling tasks around the home. It features a maximum torque of 6 N-m, a 6.35 mm quick-change chuck, and a versatile design that allows for both pistol and straight grip configurations.

2. Mirayiridzo Yekuchengetedza

Gara uchitarisa matanho ekuchengetedza ekutanga paunenge uchishandisa maturusi emagetsi kuderedza njodzi yemoto, kuvhunduka kwemagetsi, uye kukuvara kwemunhu.

• Kuchengetedzwa Kwenzvimbo Yebasa: Chengeta nzvimbo yako yebasa yakachena uye ine chiedza chakanaka. Nzvimbo dzakatsvikinyidzana kana dzine rima dzinokoka tsaona. Usashandise maturusi emagetsi munzvimbo dzinoputika, sekunge paine zvinwiwa zvinobvira moto, magasi, kana huruva.
• Kuchengetedzwa Kwemagetsi: Dzivisa kubata kwemuviri nenzvimbo dzakavhurika kana dzakadzika dzakaita sepombi, maraidhiya, mitsara, uye mafiriji. Usafumure maturusi emagetsi kunaya kana kunyorova.
• Kuchengeteka Kwemunhu: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry.
• Kushandisa uye Kuchengeta Chishandiso: Usamanikidza mudziyo wemagetsi. Shandisa simba rekushandisa rakakodzera pakushandisa kwako. Bvisa plug kubva pamagetsi uye/kana bvisa bhatiri paki usati waita chero zvigadziriso, kushandura zvinhu, kana kuchengetedza maturusi emagetsi.
• Battery Pack Kushandisa uye Kuchengeta: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. When battery pack is not in use, keep it away from other metal objects.

3. Package Zviri mukati

Tarisa kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako. Kana chero zvinhu zvisipo kana kukuvadzwa, ndapota taura nerutsigiro rwevatengi.

• 1 x HYCHIKA 3.6V Cordless Screwdriver
• 19 x Screwdriver Bits
• 1 x Extension Bar
• 1 x Adapter yekuchaja
• 1 x Chinyorwa cheMushandisi

Figure 3.1: Contents of the HYCHIKA 3.6V Cordless Screwdriver package, including the screwdriver, various bits, and charging adapter.

4. Zvigadzirwa zveChigadzirwa uye Zvikamu

Familiarize yourself with the different parts of your cordless screwdriver.

Figure 4.1: Key components of the screwdriver, including the magnetic chuck, PUSH button, front LED light, On/Off switch, LED charger indicator, 3.5mm charger port, and forward & reverse button.

• Magnetic Chuck: 1/4 inch (6.35mm) quick-change chuck for easy bit installation and removal.
• Kumberi kwe LED Mwenje: Illuminates the work area for improved visibility in dark environments.
• Batidza/Kudzima Switch: Activates and deactivates the screwdriver.
• Forward & Reverse Button: Controls the rotation direction for screwing and unscrewing.
• LED Charger Indicator: Provides status of battery charging.
• 3.5mm Charger Port: Connection point for the charging adapter.
• PUSH Bhatani: Used to adjust the grip configuration from pistol to straight.

5. Setup

5.1 Kuchaja Bhatiri

The screwdriver is powered by a 3.6V 2000 mAh Lithium-Ion battery. Before first use, fully charge the battery.

1. Connect the charging adapter to the 3.5mm charger port on the screwdriver.
2. Plug the charging adapter into a standard electrical outlet.
3. The LED charger indicator will illuminate during charging. Once fully charged, the indicator may change color or turn off depending on the model.
4. Bvisa charger kana yapedza kuchaja.

Figure 5.1: The screwdriver connected to its charging adapter, indicating a full charge.

The screwdriver is designed to maintain full power output even when the battery is low, ensuring consistent performance until the battery is depleted.

5.2 Kuisa Screwdriver Bits

The screwdriver features a 1/4 inch (6.35mm) magnetic quick-change chuck for easy bit installation.

1. Sarudza yakakodzera screwdriver bit yebasa rako.
2. Insert the bit into the magnetic chuck until it is securely seated. The magnetic chuck will hold the bit firmly in place.
3. To remove a bit, simply pull it out of the chuck. Bits with grooves are designed for easier removal.

Figure 5.2: Visual guide for inserting a bit into the magnetic chuck and removing it.

6. Operating Instructions

6.1 Adjusting Grip Configuration

The screwdriver can be used in two grip configurations: pistol grip or straight grip, for enhanced versatility and comfort.

1. To change the grip, press and hold the "PUSH" button located at the top of the screwdriver.
2. While holding the button, rotate the handle ninety degrees to switch between pistol and straight configurations.
3. Release the "PUSH" button once the desired configuration is achieved. The handle will lock into place.

Figure 6.1: Demonstrates the process of transforming the screwdriver's grip by pressing the PUSH button and rotating the handle.

6.2 Forward and Reverse Operation

The forward/reverse button controls the direction of rotation for screwing and unscrewing.

• To drive screws (forward rotation), push the forward/reverse button to the left (when viewed kubva kumashure kwechishandiso).
• To remove screws (reverse rotation), push the forward/reverse button to the right.
• When the button is in the center position, the tool is locked, preventing accidental activation.

6.3 Kushandisa Mwenje weBasa we LED

The built-in LED light automatically illuminates when the screwdriver is in operation, providing visibility in dimly lit areas.

Figure 6.2: The integrated LED light provides clear illumination for working in dark environments.

7. Kuchengeta

Regular maintenance ensures the longevity and optimal performance of your screwdriver.

• Kuchenesa: Keep the ventilation openings clean and free from dust. Use a soft, damp jira rekuchenesa mudziyo casing. Usashandise makemikari ane hasha kana abrasive cleaners.
• Bit Care: Clean screwdriver bits after use. Store them in the provided case to prevent loss and damage.
• Battery Storage: If storing the tool for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Recharge the battery every 3-6 months to maintain its health.
• General Inspection: Periodically check for any loose screws, damaged cords, or worn parts. Do not use the tool if any damage is observed.

8. Kugadzirisa matambudziko

This section addresses common issues you might encounter with your screwdriver.

Kana dambudziko rikaramba riripo mushure mekuyedza mhinduro idzi, ndapota taura nerutsigiro rwevatengi.

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

Overstock offers lifetime after-sales service for this product. For any questions, concerns, or technical assistance, please contact our customer support team.

Please have your model number (c131a012-0da9-4306-aeab-b1d9ff5cd4b7) and purchase information ready when contacting support.