1. Nhanganyaya
This manual provides essential information for the safe and efficient operation of your Enel X JuiceBox 40 Amp Electric Vehicle (EV) Charging Station. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage or injury.
2. Safety Information
Gara uchitevedzera zvinotevera mirairo yekuchengetedza:
- Ensure professional installation by a qualified electrician.
- Do not attempt to open or modify the JuiceBox unit.
- Keep the charging station away from flammable materials and liquids.
- Do not use the JuiceBox if it appears damaged or if the charging cable is frayed.
- Nguva dzose tevera makodhi emagetsi emunharaunda nemitemo.
3. Chii chiri muBhokisi
Pakuburitsa, tarisa kuti zvese zviriko zviripo:
- 1 x Enel X JuiceBox 40 Amp EV Kuchaja Chiteshi
- 1 x USB Cable
- Installation Hardware (if applicable, refer to separate installation guide)
4. Setup uye Kuiswa
The Enel X JuiceBox 40 Amp is designed for wall mounting. Professional installation is highly recommended.
4.1 Kuiswa
Identify a suitable location for wall mounting, ensuring it is close to your vehicle's parking spot and a dedicated 240 Volt electrical circuit. Use the provided mounting template and hardware to securely attach the JuiceBox to a sturdy wall surface.
Figure 1: Enel X JuiceBox 40 Amp EV charging station with smartphone app interface. The image shows the compact wall-mounted unit with its integrated cable management, alongside a mobile phone screen displaying real-time charging data, including current charge level and estimated completion time.
4.2 Electrical Connection
Connect the JuiceBox to a dedicated 240 Volt circuit. This step requires a qualified electrician to ensure compliance with all electrical codes and safety standards.
4.3 Wi-Fi yekubatanidza
Once powered, the JuiceBox can be connected to your home Wi-Fi network. Download the Enel X Way app (compatible with Smartphones and Monitors) from your device's app store. Follow the in-app instructions to pair your JuiceBox with your account and network for smart charging features and remote control.
5. Operating Instructions
5.1 Kutanga Kupomera
- Iva nechokwadi chekuti mota yako yakamira uye yakadzimwa.
- Vhura nzvimbo yekuchaja yemotokari yako.
- Plug the JuiceBox charging connector firmly into your vehicle's charging port.
- The JuiceBox will automatically begin charging. The LED indicator on the unit will change to indicate charging status.
5.2 Using the Enel X Way App
The Enel X Way app provides advanced control and monitoring capabilities:
- Monitor Charge Status: View real-time charging progress, energy delivered, and estimated time to full charge.
- Kuchaja Purogiramu: Set specific times for charging to take advantage ye off-peak magetsi rates.
- Gadzirisa Amphasha: Control the charging current (up to 40 Amps) to match your vehicle's capabilities or home electrical capacity.
- Kuchaja nekukurumidza: Utilize the fast charging feature for quicker power delivery when needed.
- Zviziviso: Receive alerts for charging start/stop, interruptions, and completion.
5.3 Ending a Charge
To stop charging, either unplug the connector from your vehicle or use the Enel X Way app to end the session. Always return the charging cable to its holder on the JuiceBox unit after use.
6. Kuchengeta
The Enel X JuiceBox requires minimal maintenance:
- Kuchenesa: Nguva nenguva pukuta kunze kweyuniti nenyoro, damp jira. Usashandise abrasive cleaners kana solvents.
- Cable Inspection: Regularly inspect the charging cable and connector for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately and contact support.
- Kufefetedza Ensure the area around the JuiceBox is clear to allow for proper ventilation.
7. Kugadzirisa matambudziko
Tarisa kune tafura iri pazasi kune zvakajairika nyaya uye mhinduro dzadzo:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| JuiceBox not powering on. | No power from circuit; tripped breaker. | Check circuit breaker. Ensure proper electrical connection. Contact electrician if issue persists. |
| Charging not starting. | Cable not fully inserted; vehicle not ready to charge; app settings. | Ensure cable is securely plugged into vehicle. Check vehicle's charging settings. Verify app schedule or settings. |
| Wi-Fi nyaya dzekubatanidza. | Incorrect Wi-Fi password; router too far; network interference. | Re-enter Wi-Fi password in app. Move router closer or use a Wi-Fi extender. Check for network congestion. |
| Kuchaja zvishoma nezvishoma. | App amperage setting; vehicle limitation; shared circuit. | Check amperage setting in Enel X Way app. Confirm vehicle's maximum charging rate. Ensure JuiceBox is on a dedicated circuit. |
If you encounter issues not listed here or require further assistance, please contact Enel X customer support.
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Ene X |
| Model | Juicebox 40 amp |
| Ampage | 40 Amps |
| Chiyamuro Voltage | 240 Volts |
| Mounting Type | Gomo reMasvingo |
| Kubatana Technology | Wi-Fi |
| Connector Type | Auxiliary (Standard EV Connector) |
| Inowirirana Devices | Monitors, Smartphones |
| Special Feature | Fast Charging |
| Inosanganisirwa Zvikamu | 1 x JuiceBox, 1 x USB Cable |
| Package Dimensions | 23 x 14.9 x 10.5 inches |
| Item Weight | 17.51 makirogiramu |
| Zuva Rokutanga Kuwanikwa | Kubvumbi 8, 2023 |
9. Ruzivo rweWaranti
Enel X provides a limited warranty for the JuiceBox 40 Amp EV Charging Station. For detailed warranty terms and conditions, including coverage period and exclusions, please refer to the warranty card included with your product or visit the official Enel X website. Chengetedza humbowo hwako hwekutenga kune warranty claim.
10. Mutengi Tsigiro
For technical assistance, troubleshooting, or general inquiries regarding your Enel X JuiceBox 40 Amp, please contact Enel X customer support:
- Websaiti: Visit the official Enel X websaiti ye FAQ uye zviwanikwa zvekutsigira.
- Runhare: Refer to the contact information provided on the product packaging or the Enel X website.
- Email: Use the contact form or email address available on the Enel X support page.
When contacting support, please have your product model (Juicebox 40 amp) and serial number ready.
