Nhanganyaya
Thank you for choosing nipify Solar Motion Sensor Outdoor Lights. These lights are designed to provide efficient, eco-friendly, and reliable illumination for your outdoor spaces. With advanced solar technology and intelligent motion sensing, they offer enhanced security and convenience for your garden, patio, fence, and more.
Mufananidzo 1: Kupfuuraview of nipify Solar Motion Sensor Outdoor Lights (8-pack).
Product Features
- Solar Powered & Energy Saving: Equipped with 140 high-quality LED beads and 180° wide-angle lighting. Converts solar energy into electricity during the day and automatically lights up at night, saving electricity costs.
- 3 Lighting Modes & Motion Sensor: Built-in sensitive motion sensor with three selectable modes for various lighting needs.
- Isaipinda Mvura uye Isingapindi Kwemhepo: Made of high-quality, durable ABS material with an LED protection screen, ensuring normal operation in various weather conditions.
- High-efficiency Solar Panel: Solar energy conversion rate increased to 22% for faster charging and longer illumination time.
- Wireless & Nyore Kuisa: Simple, wire-free installation using provided screws, suitable for outdoor walls, gardens, patios, decks, garages, driveways, porches, and fences.
Figure 2: High-efficiency solar charging during the day and automatic illumination at night.
Figure 3: Waterproof and weather-resistant design for all-season use.
Package Zviri mukati
Ndokumbira utarise pasuru kuti uve nechokwadi chekuti zvikamu zvese zviripo:
- nipify Solar Motion Sensor Outdoor Lights (8 units for 8-pack)
- Mounting Hardware (screws and wall plugs)
- User Manual
Installation Guide
Tevedza nhanho idzi kuti uite zvakakwana:
- Sarudza Nzvimbo: Select a location that receives direct sunlight for at least 6-8 hours a day to ensure the solar panel can fully charge. Avoid areas under eaves, trees, or other obstructions that might block sunlight.
- Activate the Light and Set the Mode: Before installation, press the power button on the light to activate it and select your desired lighting mode (see "Operating Instructions" section for details on modes).
- Gomo reChiedza: Use the provided screws and wall plugs to securely mount the light on a wall, fence, or other suitable surface. Ensure the light is stable and facing an area where motion detection is desired.
- Chekutanga Charge: Allow the solar light to charge for a full day (6-8 hours) in direct sunlight before its first use at night.
Figure 4: Step-by-step installation and initial setup.
Operating Instruction
The nipify Solar Motion Sensor Outdoor Lights feature 3 intelligent lighting modes. Use the mode button on the light to cycle through them:
Mode 1: Constant Light Mode
The light automatically turns on at a medium brightness level at night and turns off during the day. This mode provides continuous ambient lighting.
Modhi 2: Modhi yeSensor yeChiedza Chisina Mwenje
The light stays at a low brightness (dim light) when no motion is detected. When motion is detected, it switches to full brightness for approximately 20 seconds, then returns to dim light.
Mode 3: Sensor Light Mode
The light remains off when no motion is detected. When motion is detected, it turns on at full brightness for approximately 20 seconds, then turns off again.
Figure 5: Visual representation of the 3 lighting modes.
To change modes, press the button on the front of the light. Each press will cycle to the next mode.
Maintenance
To ensure the longevity and optimal performance of your solar lights, follow these maintenance tips:
- Chenesa Solar Panel: Pukuta solar panel nguva dzose ne soft, damp jira rekubvisa huruva, tsvina, mashizha, kana sinou. Pani yakachena inovimbisa kunyura kwechiedza chezuva uye kunyatsochaja.
- Bvisa Zvipingamupinyi: Periodically check that no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel.
- Battery Care: While the internal battery is designed for long life, if the light's performance significantly degrades over several years, consider replacing the unit as the battery is not user-replaceable.
Kugadzirisa matambudziko
If you encounter issues with your nipify Solar Motion Sensor Outdoor Lights, refer to the table below:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chiedza hachibatiki usiku. | Kusawana chiedza chezuva chakakwana masikati. | Ensure the solar panel receives 6-8 hours of direct sunlight. Relocate if necessary. |
| Solar panel yakasviba. | Clean the solar panel surface with a soft, damp jira. | |
| Light is not activated or in the wrong mode. | Press the power/mode button to activate the light and select the desired mode. | |
| Motion sensor haisi kushanda. | Sensor yakavharika kana kuti yakasviba. | Ensure the sensor lens is clean and clear of obstructions. |
| Light is installed too high or too far from detection area. | Adjust installation height and position to optimize motion detection range. | |
| Light stays dim or turns off too quickly. | Kusakwana kuchaja. | Allow the light to charge for a full day in direct sunlight. |
| Kuparara kwebhatiri nekufamba kwenguva. | Consider replacing the unit if it's several years old and performance has significantly decreased. |
Zvinotsanangurwa
| Attribute | Detail |
|---|---|
| Brand | nipify |
| Model Number | NO/NA |
| Chiedza Chinyorwa Type | LED (140 LEDs) |
| Chiedza Rudzi | Warm White |
| Simba Source | Solar Powered |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 10"L x 5"W x 5"H |
| Item Weight | 2.4 mapaundi (emapaketi gumi nemaviri) |
| Special Feature | Motion Sensor |
| Mvura Resistance Level | Isingapindi mvura |
| Kushanda Nesimba Rekushandura Zuva | 22% |
| Installation Type | Gomo reMasvingo |
| Nhamba Yezvinhu | 8 (for 8-pack) |
Ruzivo Rwakakosha Chekuchengetedza
- Do not disassemble or modify the product. This may cause damage and void any warranty.
- Chengeta chigadzirwa kure nemoto kana tembiricha yakakwira.
- Ensure the installation surface is sturdy enough to support the light.
- Do not stare directly into the LED lights when they are on, as this may cause eye strain.
- Dispose of the product according to local regulations at the end of its lifespan.
Warranty uye Support
nipify is committed to providing high-quality products. For any questions, concerns, or support needs regarding your solar lights, please contact nipify customer service through the platform where you purchased the product or visit the official nipify store.
For more information and to explore other nipify products, please visit the nipify Store on Amazon.
