AQQA Aquarium Light Model GCA-AQ052 Instruction Manual

1. Chigadzirwa Pamusoroview

The AQQA Aquarium Light Model GCA-AQ052 is a full-spectrum LED lighting solution designed for aquariums ranging from 17 to 24 inches. It features 14 adjustable colors, 5 brightness levels, and an integrated timer for automated operation. The light is constructed with a durable aluminum alloy and boasts an IP67 waterproof rating, ensuring longevity and safety in aquatic environments.

Image 1.1: The AQQA Aquarium Light providing illumination to a planted aquarium.

2. Package Zviri mukati

Ndapota simbisai kuti zvikamu zvese zviripo mupakeji:

• AQQA Aquarium Light Unit (Model GCA-AQ052)
• Extendable Mounting Brackets (2x)
• Power Adapter with Controller
• Chinyorwa Chirairo (gwaro iri)

3. Setup Instructions

3.1 Kuisa Chiedza

1. Nyatsoburitsa zvese zvikamu kubva mubhokisi.
2. Attach the extendable mounting brackets to each end of the light unit. Ensure they are securely fastened.
3. Place the light unit on top of your aquarium. Adjust the extendable brackets to fit the width of your tank (suitable for 17-24 inch tanks).
4. Ensure the light is stable and centered over the aquarium for even illumination.

Image 3.1: The extendable brackets allow for flexible installation on various tank sizes.

3.2 Simba Connection

1. Connect the power adapter cable to the light unit.
2. Batanidza dhiraivha yemagetsi mugetsi remagetsi.
3. Ensure the power cord is routed safely and away from water to prevent accidental splashes.

4. Operating Instructions

The AQQA Aquarium Light is controlled via an inline remote with several buttons for various functions.

Image 4.1: The inline remote control for managing light settings.

4.1 Simba On/Kudzima

• Press the Simba bhatani () kuti mwenje ubatidzwe kana kudzima.

4.2 Kugadziriswa Kwemavara

• Press the Color Change button () to cycle through 14 different color modes.
• To activate the Auto Color Change Mode, dzvanya uye ubate iyo Color Change button for approximately 3 seconds. The light will automatically transition between colors.

4.3 Kugadzirisa Kujeka

• Shandisa iyo Brightness Up (+) uye Brightness Down (-) buttons to adjust the light intensity.
• There are 5 adjustable brightness levels, ranging from 10% to 100%.

Image 4.2: Visual representation of the 5-level brightness adjustment.

4.4 Timer Basa

The built-in timer allows for automated lighting cycles.

• Press the Bhatani renguva () to select a duration: 3 hours (3H), 6 hours (6H), kana 12 hours (12H).
• Once a timer is set, the light will automatically turn off after the selected duration and will turn on at the same time the next day, repeating the cycle.
• For example, if you activate the 12H timer at 8:00 AM, the light will turn off at 8:00 PM and automatically turn on again at 8:00 AM the following day.

Image 4.3: Timer settings for 3, 6, or 12 hours of operation.

5. Kuchengeta

5.1 Kuchenesa

• Before cleaning, always unplug the light from the power outlet.
• Wipe the light unit with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or waterproof sealing.
• Iva nechokwadi chekuti mwenje wacho wakaoma zvachose usati wabatanidzazve kumagetsi.

5.2 Waterproofing Information

• The AQQA Aquarium Light has an IP67 waterproof rating, meaning it is protected against dust and temporary immersion in water (up to 1 meter for 30 minutes).
• Zvakakosha: This light is designed for placement over the aquarium and is kwete intended for submersible use. Do not immerse the light unit directly into the water.

6. Kugadzirisa matambudziko

If you encounter issues with your AQQA Aquarium Light, please refer to the following common solutions:

• Chiedza Chisina Kubatidzwa:
  • Check if the power adapter is securely plugged into both the light unit and the electrical outlet.
  • Tarisa kuti magetsi emagetsi ari kushanda nekuisa imwe mudziyo.
  • Ensure the power button on the inline remote is pressed.
• Colors or Brightness Not Changing:
  • Ensure the remote control buttons are being pressed firmly.
  • If the light is stuck on a specific color or brightness, try unplugging the unit for 30 seconds and then plugging it back in to reset.
• Timer Basa Risingashande:
  • Confirm that a timer duration (3H, 6H, or 12H) has been selected by pressing the timer button. The corresponding indicator light on the remote should be illuminated.
  • The timer cycle begins from the moment it is set. If you unplug the light, the timer will reset.
• Kudzima kana Kusashanda zvakanaka kwechiedza:
  • Bvisa magetsi nekukasika.
  • Inspect the power cord and light unit for any visible damage.
  • Kana nyaya dzikaramba dzichienderera, bata rutsigiro rwevatengi.

7. Zvinotsanangurwa

Image 7.1: Detailed specifications for different AQQA aquarium light models, including the GCA-AQ052.

8. Ruzivo rweWaranti

The AQQA Aquarium Light Model GCA-AQ052 comes with a manufacturer warranty for 1 gore kubva pazuva rekutenga. Ndapota chengetedza humbowo hwako hwekutenga kwezvichemo zvewaranti.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, unauthorized repair, or failure to follow the instructions in this manual.

9. Mutengi Tsigiro

For further assistance, technical support, or warranty inquiries, please contact AQQA customer service through the retailer where the product was purchased or visit the official AQQA brand store online.

We are committed to providing quality products and support to our customers.