ALLmeter Pen Type Digital Multimeter AC Voltage Tester (Model B0C4SRMFMD) Instruction Manual

1. Nhanganyaya

This manual provides detailed instructions for the safe and effective use of your ALLmeter Pen Type Digital Multimeter, Model B0C4SRMFMD. This device is designed for measuring AC/DC voltage, resistance, diode, and continuity. It also features non-contact voltage (NCV) detection and live wire identification. Please read this manual thoroughly before operation and retain it for future reference.

2. Safety Information

WARNING: Electrical shock hazard. Improper use of this meter can cause injury or death. Follow all safety precautions.

• Always ensure the meter is in good working condition before use. Inspect for any damage to the casing or test leads.
• Usaedza kuyera voltages kana macurrents anopfuura miganhu yakataurwa.
• Exercise extreme caution when working with live circuits. Always assume circuits are live until verified otherwise.
• Pfekai midziyo yekudzivirira yakafanira (PPE), yakadai semagirazi ekuchengetedza uye magirovhosi anodzivirirwa.
• Do not use the meter in wet environments or if your hands are wet.
• Iva nechokwadi chekuti nzvimbo yebhatiri yakavharwa zvakanaka usati watanga kushanda.
• This device is designed for AC voltage detection in NCV mode and cannot measure DC current.

3. Chigadzirwa Pamusoroview

Familiarize yourself with the components of your ALLmeter Pen Type Digital Multimeter:

Mufananidzo 3.1: Labeled diagram of the ALLmeter Pen Type Digital Multimeter. Key components include the Input COM, Portable pen hook, Select key, HOLD key, N/L/P key, Display LCD, Signal strength indicator, LED light, and Test pen tip.

4. Setup

4.1 Kuiswa kwebhatiri

The ALLmeter Pen Type Digital Multimeter requires one AAA battery (included). To install or replace the battery:

1. Locate the battery compartment cover, typically at the rear or top of the device.
2. Vhura chivharo.
3. Isa imwe AAA bhatiri, kuve nechokwadi chechokwadi polarity (+/-).
4. Vhara chivharo chebhatiri zvakachengeteka.

The device includes a low-battery indicator on the LCD display to signal when replacement is needed.

5. Operating Instructions

5.1 Simba On/Kudzima

Press the 'Select' button to power on the device. The device will automatically power off after 15 minutes of inactivity to conserve battery life.

5.2 Automatic Measurement Function

In automatic mode, the meter intelligently detects the type of measurement (DC/AC voltage or resistance) and displays the value. This simplifies the measurement process by eliminating the need to manually select ranges.

Mufananidzo 5.1: Examples of automatic measurement displays for AC voltage, DC voltage, and resistance (Ohm).

5.3 Manual Functions (Electric Field and Live Wire Detection)

Pressing the 'N/L' button cycles through additional functions. Note that in these modes, only AC can be measured, not DC.

Mufananidzo 5.2: Displays for Electric Field (EF) and Live Wire (LIVE) detection modes.

• EF (Electric Fields): This mode detects electric fields without requiring a ground wire. Bring the tip close to a wire to detect if it is live.
• LIVE (Live Wire): In this mode, the device functions as an AC detector. Touch the tip to a wire, and it will beep if the wire is live.

5.4 Diode Kuyera

To measure a diode:

1. Press the 'Select' button repeatedly until the diode symbol appears on the screen.
2. Connect the test leads to the diode.

Mufananidzo 5.3: Measuring a diode on a circuit board using the multimeter.

5.5 Kuenderera mberi Muedzo

The continuity test checks for an unbroken path in a circuit. If a continuous path is detected, the meter will emit an audible beep.

5.6 Vasina-Kubata Voltage (NCV) Kuonekwa

The NCV feature allows for safe detection of AC voltage without direct contact. The device will indicate the presence of AC voltage within a range of 12V-1000V. In NCV mode, it can only detect alternating current (AC) and cannot measure direct current (DC).

Mufananidzo 5.4: Using the NCV function and LED light in a low-light environment.

5.7 Data Hold (HOLD Key)

Dzvanya bhatani re'BATA' kuti umise kuverenga kwazvino pachiratidziro. Dzvanya iyo zvakare kuti usunungure basa rekubata.

5.8 Chiedza che LED

The built-in LED light can be activated to illuminate dimly lit work areas. Refer to the product overview for the location of the LED light.

6. Zvikumbiro

The ALLmeter Pen Type Digital Multimeter is suitable for various electrical testing scenarios:

Mufananidzo 6.1: Examples of multi-function usage, including testing electrical outlets and circuit breaker panels.

Mufananidzo 6.2: Testing electrical components within a car engine.

7. Zvinotsanangurwa

8. Kuchengeta

• Kuchenesa: Wipe the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Kuchengeta: When not in use for extended periods, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Kutsiva Bhatiri: Replace the AAA battery when the low-battery indicator appears on the display.

9. Kugadzirisa matambudziko

10. Package Zviri mukati

The ALLmeter Pen Type Digital Multimeter package includes:

• ALLmeter Pen Type Digital Multimeter
• 1.5V AAA Bhatiri
• Edza Kutungamira

Mufananidzo 10.1: The included test lead for various measurements.

11. Warranty uye Tsigiro

For warranty information or technical support, please refer to the documentation provided with your purchase or contact ALLmeter customer service directly. Contact details are typically available on the manufacturer's official webnzvimbo kana chigadzirwa kurongedza.