Nhanganyaya
Thank you for choosing the Rocketfish Tilting TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 32-inch to 90-inch flat-panel televisions, this mount offers a secure and low-profile solution with convenient fingertip tilt adjustment for optimal viewing angles. Please read this manual thoroughly before beginning installation and retain it for future reference.
Image: Rocketfish Tilting TV Wall Mount, front view.
Safety Information
Kuisa kana kushandisa chigadzirwa ichi zvisina kunaka kunogona kukonzera kukuvara kana kukuvara kwakanyanya. Ndapota cherechedzai matanho ekuchengetedza anotevera:
- Verenga mirairo yese: Ensure you understand all instructions and warnings before installation. If you have any questions, contact customer support.
- Weight Capacity: Usapfuure huremu hwepamusoro hwe130 lbs (59 kg). Iyi mount yakagadzirirwa maTV ari pakati pe32 ne90 inches.
- Rudzi rweMadziro: Chigadziko ichi chakagadzirirwa kuiswa pamadziro ematanda kana pamadziro ekongiri/zvidhinha zvakasimba. Usaise pamadziro emadziro chete.
- Professional Installation: If you are unsure about your ability to install this mount safely, seek assistance from a qualified professional.
- Kuongorora kwechikamu: Usati waisa, simbisa kuti zvikamu zvese zviripo uye hazvina kukuvara. Usashandise zvikamu zvakakuvara.
- Dzivisa kunyanya kuomesa: Do not over-tighten screws, as this may cause damage to the mount or your TV.
- Vana: Chengetedza vana kure nenzvimbo yekuisa.
Package Zviri mukati
Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer support for assistance.
- Kuungana kwePlati remadziro
- Maoko eChibvumirano cheTV (2)
- Zvishandiso zveHardware (zvikururu zvakasiyana-siyana, mawasher, maspacers, maankora)
- Bhuku reMirayiridzo
Setup uye Installation
Zvishandiso Zvinodiwa (Zvisina Kubatanidzwa)
- Phillips Musoro Screwdriver
- Drill with appropriate drill bits (wood or masonry)
- Chinotsvagisa matanda (chekuisa matanda ehuni)
- Level
- Penzura
- Tape Kuyera
- Hammer (for concrete anchors)
Pre-Instalation Checklist
- TV Kuenderana: Verify your TV's VESA mounting pattern and weight are within the mount's specifications (32"-90" and up to 130 lbs).
- Maumbirwo eMadziro: Ensure the wall can safely support the combined weight of the mount and your TV.
- Nzvimbo: Choose a mounting location free from electrical wires, water pipes, or other hazards.
Image: Visual representation of TV compatibility for the mount.
Nhanho-ne-Nhanho Kuisa
- Locate Wall Studs (Wood Stud Installation): Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at the desired height for the top of your TV. Ensure the marks are level.
- Mako Drilling Points: Hold the wall plate against the wall, aligning its center with your marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
- Drill Pilot Holes: For wood studs, drill pilot holes using a 7/32" (5.5 mm) drill bit to a depth of 2.2" (55 mm). For concrete/brick walls, use a 3/8" (10 mm) masonry drill bit to a depth of 2.4" (60 mm) and insert concrete anchors.
- Batanidza Purati Yemadziro: Secure the wall plate to the wall using the provided lag bolts and washers. Tighten the bolts firmly but do not over-tighten.
- Batanidza Mabhureki eTV paTV: Carefully place your TV face down on a soft, clean surface. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
- Hang TV on Wall Plate: With assistance, carefully lift the TV and hook the TV bracket arms onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
- Terevhizheni Yakachengeteka: Locate the locking screws or mechanisms on the bottom of the TV bracket arms. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
- Gadzirisa Kurereka: Loosen the tilt tension knob(s) on the mount (if applicable) to adjust the TV to your desired viewing angle. Once set, tighten the knob(s) to secure the tilt position.
Kushanda kweTilt Feature
The Rocketfish Tilting TV Wall Mount features fingertip tilt technology, allowing you to easily adjust your TV's vertical viewing angle. To tilt your TV:
- Loosen Tension: Locate the tilt tension knob(s) on the side or bottom of the TV bracket arms. Turn the knob(s) counter-clockwise slightly to loosen the tension.
- Gadzirisa kona: Gently push or pull the bottom of your TV to achieve the desired upward or downward tilt angle.
- Secure Position: Once the desired angle is achieved, turn the tilt tension knob(s) clockwise to tighten and secure the TV in place. Ensure the TV is stable before releasing icho.
Image: Close-up of the tilt tension knob for adjustment.
Maintenance
Kugadzirisa nguva dzose kunobatsira kuona kuti chinonamira pamadziro cheTV yako chinoramba chiripo kwenguva refu uye chakachengeteka.
- Kuchenesa: Pukuta chigadziko nejira rakapfava, rakaoma. Usashandise zvinochenesa kana zvinonyungudutsa, sezvo zvinogona kukuvadza magumo acho.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
- Kuongorora Kukuvadza: Inspect the mount for any signs of damage or wear. If any damage is found, do not use the mount and contact customer support.
Kugadzirisa matambudziko
If you encounter issues with your Rocketfish TV wall mount, refer to the following common problems and solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| TV haina kuenzana. | Purati remadziro harina kuenzana panguva yekuisa. | Remove TV, loosen wall plate screws, adjust with a level, and re-tighten. |
| Gomo rinonzwa rakasununguka pamadziro. | Lag bolts not fully tightened or improper wall anchors used. | Ensure lag bolts are securely tightened into studs/anchors. Verify correct anchors for wall type. |
| TV tilt is too stiff or too loose. | Tilt tension knob needs adjustment. | Adjust the tilt tension knob(s) as described in the "Operating the Tilt Feature" section. |
| TV haina kukodzera pabhodhi. | Incorrect VESA pattern or TV weight exceeds capacity. | Verify your TV's VESA pattern and weight against the mount's specifications. This mount supports 32"-90" TVs up to 130 lbs. |
If the problem persists or is not listed here, please contact Rocketfish customer support.
Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Brand | rocket fish |
| Model Number | RF-TVMLPT03V3 |
| Mounting Type | Gomo reMasvingo |
| Movement Type | Tilt |
| Inoenderana TV Saizi | 32 - 90 Inches |
| Maximum Weight Capacity | 130 lbs (59 kg) |
| Material | Either Aluminum, Stainless Steel, or Alloy Steel |
| Product Dimensions | 2 x 26.49 x 17.4 inches |
| Item Weight | 6 makirogiramu |
| Yakaderera Profile Design | Positions TV 1.9" from the wall |
Warranty uye Support
Rocketfish products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Rocketfish website. If you require technical assistance, have questions about installation, or need to report missing/damaged parts, please contact Rocketfish customer support. Have your product model number (RF-TVMLPT03V3) and purchase information ready when contacting support.
You can often find support contact information on the Rocketfish official websaiti kana kuburikidza nemutengesi kwawakatenga chigadzirwa.
