Nhanganyaya
This manual provides essential instructions for the setup, operation, and maintenance of your Intel NUC 13 Pro NUC13ANHi3 Barebone System. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage. The Intel NUC kit features a customizable board and chassis that are ready to accept a wide variety of memory, storage, and operating systems.
Mberi view of the Intel NUC 13 Pro NUC13ANHi3 Barebone System, showing USB ports, headphone jack, and power button.
Package Zviri mukati
Tarisa uone kuti zvinhu zvese zviripo mupakeji:
- Intel NUC 13 Pro Kit NUC13ANHi3
- Power Adapter
- US Power Cord
Gadzirira
1. Kuisa Memory (RAM)
The NUC 13 Pro NUC13ANHi3 supports DDR4 SDRAM.
- Unscrew the bottom cover of the NUC.
- Locate the DDR4 SDRAM compatible slots.
- Gently insert the memory modules into the slots until they click into place.
- Tsiva kavha yepasi.
2. Installing Storage (HDD/SSD)
The system supports Serial ATA interface for storage.
- With the bottom cover removed, locate the storage bay.
- Connect your HDD or SSD to the Serial ATA connector.
- Secure the drive within the bay using the provided screws (if applicable).
- Tsiva kavha yepasi.
3. Kubatanidza Peripherals
Connect your monitor, keyboard, mouse, and other peripherals.
Rear view of the Intel NUC 13 Pro NUC13ANHi3, illustrating the power input, HDMI ports, Ethernet port, and USB ports.
- Ratidza: Connect your monitor(s) to the HDMI ports.
- USB Zvishandiso: The system supports up to 7 USB peripherals, including 2 USB 2.0 ports. Connect your keyboard, mouse, and other USB devices to the available USB ports.
- Network: For wired network connectivity, connect an Ethernet cable to the 2.5 Gigabit Ethernet port.
- Simba: Connect the power adapter to the NUC and then to a power outlet.
Operating System Installation
The Intel NUC 13 Pro NUC13ANHi3 is a barebone system, requiring the user to install an operating system. Supported operating systems include Red Hat Linux, Ubuntu Linux, Windows 10, Windows 11 Home, and Windows 11 Pro.
- Prepare a bootable USB drive with your chosen operating system installer.
- Insert the USB drive into an available USB port on the NUC.
- Power on the NUC and enter the BIOS/UEFI setup (usually by pressing F2 or Delete during startup).
- Configure the boot order to prioritize the USB drive.
- Save changes and exit BIOS/UEFI. The system will boot from the USB drive, allowing you to proceed with the OS installation.
Operation
Kubatidza/Kudzima
- Kubatidza: Dzvanya bhatani remagetsi riri pamberi pepaneru.
- Kudzima: Shandisa basa rekudzima reoperating system. Neimwe nzira, tinya wobata bhatani rekudzima kwemasekonzi mashanu kuti umanikidze kudzima (shandisa chete kana zvichidikanwa).
Kupinda muBIOS/UEFI
To access the BIOS/UEFI settings, power on the NUC and repeatedly press the F2 kiyi (kana Delete key on some models) during the initial boot sequence.
Maintenance
Kuchenesa
- Ita shuwa kuti mudziyo wakadzimwa uye wakaburitswa usati wachenesa.
- Use a soft, dry cloth to wipe the exterior of the NUC.
- For dust accumulation in vents, use compressed air. Do not spray liquids directly onto the device.
Software Updates
Regularly update your operating system, drivers, and BIOS/UEFI firmware to ensure optimal performance and security. Visit the official Intel support website for the latest updates specific to the NUC13ANHi3 model.
Kugadzirisa matambudziko
- Hapana Simba:
Ensure the power adapter is securely connected to both the NUC and a working power outlet. Verify the power cord is properly seated in the adapter.
- Hapana Chiratidziro:
Check that the monitor is powered on and correctly connected to the NUC's HDMI port. Try a different HDMI cable or monitor if available. Ensure RAM modules are properly seated.
- Sisitimu Yekushanda Haisi Kutanga:
Verify that the storage drive (HDD/SSD) is correctly installed and detected in BIOS/UEFI. Check the boot order in BIOS/UEFI to ensure the correct drive is prioritized. Reinstall the operating system if necessary.
- Peripheral Haina Kuonekwa:
Try connecting the peripheral to a different USB port. Ensure necessary drivers are installed for the peripheral within your operating system.
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model | NUC13ANHi3 |
| processor | Intel Core i3-1315U Hexa-core (6 Core), 4.5 GHz |
| RAM Type | DDR4 SDRAM (up to 64GB) |
| Storage Interface | Serial ATA |
| Graphics | Intel UHD Graphics (Yakabatanidzwa) |
| Network | 2.5 Gigabit Ethernet, 802.11ax Wireless |
| USB Ports | Up to 7 USB peripherals (includes 2 USB 2.0 ports) |
| Video Output | HDMI (Max Resolution: 1920x1080) |
| Operating Systems Inotsigirwa | Red Hat Linux, Ubuntu Linux, Windows 10, Windows 11 Home, Windows 11 Pro |
| Dimensions (LxWxH) | 4.6 x 4.4 x 2.1 inches |
| Item Weight | 3.35 makirogiramu |
Warranty uye Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Intel support website.
Rutsigiro rwepamhepo: Rutsigiro rweIntel NUC
