Stealth JHT100 32" Tower PTC Ceramic Heater Instruction Manual

Product Overview

The Stealth JHT100 is a 32-inch tower PTC ceramic heater designed for efficient and quiet heating in various indoor spaces. It features multiple operating modes, a programmable timer, and advanced safety protections.

Image: The Stealth JHT100 tower heater in a room setting, showcasing dhizaini yayo inoyevedza.

Safety Information

Your safety is paramount. Please read and understand all safety instructions before operating this appliance.

Tip-Over Protection: The heater is equipped with an internal switch that automatically shuts off the unit if it is accidentally tipped over.
Overheat Protection: An integrated overheat sensor will automatically turn off the heater if it reaches an unsafe temperature.
V0 Flame Retardant Materials: Constructed with V0 flame retardant materials for enhanced safety.
Polarized Safety Plug: Features a polarized plug to reduce the risk of electric shock.
Nguva dzose iva nechokwadi chekuti hita yakaiswa panzvimbo yakasimba uye yakati sandara.
Do not cover the heater or block its air inlets/outlets.
Chengeta zvinhu zvinobvira moto zviri kure nemamita 0.9 kubva pahita.
Do not use in wet or moist locations.

Multiple Safety Protection features including Tip-Over Switch and Overheat Sensor

Image: Diagram illustrating the multiple safety features of the heater, including tip-over and overheat protection.

Package Zviri mukati

Pakuburitsa, ndapota ita shuwa kuti zvinhu zvese zvakanyorwa pazasi zviripo uye hazvina kukuvara:

Stealth JHT100 Tower Heater Unit
Detachable Base (2 halves)
Mounting Screws for Base
Remote Control (with pre-installed battery and plastic tab)
Bhuku reMirayiridzo

Gadzirira

Base Assembly:
Align the two halves of the detachable base and snap them together. Ensure the power cord passes through the designated slot in the base. Secure the base to the bottom of the heater unit using the provided screws. This step is crucial for stability and safety.
Image: A person demonstrating the assembly of the heater's base, showing the separate base parts and the attachment points.
Remote Control Setup:
The remote control comes with a plastic tab separating the battery from the contacts to preserve battery life. Gently pull out this plastic tab before first use. The remote requires a CR2025 lithium cell 3V battery.
Power Connection:
Plug the polarized power cord into a suitable 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.

Operating Instruction

The Stealth JHT100 heater can be operated using the touch control panel on top of the unit or the included remote control.

Top control panel of the Stealth JHT100 heater

Image: Close-up of the touch control panel on top of the heater, showing the power, mode, oscillation, and timer buttons.

1. Simba On / Off

Main Simba Chinja: Locate the main power switch at the back of the heater, near the base. Flip it to the "ON" position. A red indicator light will appear on the front display.
Unit Power Button: Press the Simba bhatani () on the control panel or remote to turn the heater on or off.

2. Heat Modes

The heater offers 4 modes: Low Heat (700W), High Heat (1500W), and Fan Only. The unit cycles through these modes with each press of the Mode button.

Press the Mode bhatani () to cycle through the available heating and fan modes. The red indicator light will adjust to reflect the selected mode (e.g., longer bar for higher heat).

PTC Heating Elements with Low Heat 700W and High Heat 1500W

Image: Diagram showing the internal PTC heating elements and the two heat settings: Low Heat (700W) and High Heat (1500W).

3. Kudzingiswa

Activate the 70° wide oscillation feature to distribute warmth evenly across a larger area.

Press the Oscillation bhatani () to start or stop the oscillation function.

70 degree auto oscillation feature of the heater

Mufananidzo: Pamusoro view illustrating the 70-degree auto oscillation feature, showing heat distribution across a room.

4. Timer Rinoshanda

Set a timer for automatic shut-off, ranging from 1 to 6 hours, in 1-hour increments.

Press the Bhatani renguva () repeatedly to select the desired shut-off time (1H, 2H, 3H, 4H, 5H, 6H).
To cancel the timer, continue pressing the Timer button until no timer indicator is displayed, or press it a seventh time to cycle back to no timer.

Quiet operation and 6-hour timer feature for comfortable sleep

Image: A person sleeping peacefully with the heater operating quietly in the background, highlighting the 6-hour timer feature.

5. Remote Control

The remote control duplicates all functions available on the unit's top control panel for convenient operation from a distance. Store the remote in the designated slot on the back of the heater when not in use to prevent misplacement.

Maintenance

Kugara kugadziridza kunovimbisa kuita kwakaringana uye hupenyu hurefu hweheater yako.

Kuchenesa Mhepo Sefa: The heater features a removable and washable air filter located at the back. Periodically remove the filter and clean it with mild soap and warm water to prevent dust buildup and maintain air quality. Ensure the filter is completely dry before reinserting.
Kucheneswa Kwekunze: Wipe the exterior of the heater with a soft, damp jira. Usashandise abrasive cleaners kana solvents.
Always unplug the heater from the power outlet before performing any cleaning or maintenance.

Illustration of the removable and washable air filter

Image: Diagram showing the removable mesh air filter at the back of the heater, indicating it can be cleaned.

Kugadzirisa matambudziko

If your heater is not functioning as expected, please consult the following common issues and solutions:

Dambudziko	Zvinogona Kukonzera	Solution
Heater haina kubatika.	Main power switch yadzimwa. Unit haina kubatirwa. Tip-over switch yakabatidzwa. Kudzivirirwa kwekupisa kwakagadziriswa.	Ensure main power switch at the back is ON. Tarisa kana tambo yemagetsi yakanamirwa zvakachengetedzeka muchinhu chinoshanda. Ensure the heater is upright on a flat surface. Bvisa mudziyo wacho, mirira kwemaminitsi gumi kusvika gumi nemashanu kuti utonhore, wobva waubatanidza zvakare.
Heater inodzima zvisingatarisirwi.	Tip-over switch yakabatidzwa. Kudzivirirwa kwekupisa kwakagadziriswa. Timer function has expired.	Ensure the heater is upright on a flat surface. Bvisa mudziyo wacho, mirira kwemaminitsi gumi kusvika gumi nemashanu kuti utonhore, wobva waubatanidza zvakare. Check timer settings; adjust or cancel if necessary.
Kupisa kunobuda kwakaderera.	Low heat mode selected. Sefa yemhepo yakasviba. Saizi yekamuri yakakurisa kwazvo kune hita.	Select a higher heat mode (High Heat 1500W). Clean the air filter as per maintenance instructions. This heater is designed for small to medium rooms (up to 269 sq ft).

Zvinotsanangurwa

Brand: Stealth
Model Number: JHT100
Fomu Factor: Tower
Heat Output: 1500 Watts
Amphasha: 12.5 Amps
Zviyero zvechigadzirwa: 8 x 11 x 32 inches
Chinhu Weight: 10.58 makirogiramu
Kunobva Simba: Corded Electric
Kupisa nzira: Convection, Forced Air
Oscillation: 70° Wide Oscillation
Timer: 1-6 Maawa
Safety Features: Tip-Over Protection, Overheat Protection, V0 Flame Retardant Materials, Polarized Safety Plug

Stealth JHT100 heater with 32 inch height and carry handle

Image: The 32-inch tall heater with a convenient carry handle, illustrating its portable design.

Warranty uye Support

Stealth products are covered by a 24-month manufacturer and distributor warranty. This warranty covers defects in materials and workmanship of the enclosed product. It does not cover problems caused by misuse, abuse, acts of God (such as floods, hurricanes), consequential, or incidental damages.

The warranty coverage terminates if you sell or otherwise transfer the ownership of the product.

If you believe you have a defective product, please contact us first. We will assist you to solve the issues within 24 hours.

For support, please refer to the contact information provided on your warranty card or visit the official Stealth website.

	STEALTH LIGHT UP Desktop Tower Lights XP-RGB-TL Quick Start Guide \| ABP Technology Quick start guide for the STEALTH LIGHT UP Desktop Tower Lights (Model XP-RGB-TL) by ABP Technology Ltd. Covers package contents, setup, controls, features, safety, warranty, recycling, and support.
	Bhuku reVaridzi veStealth Trailers: Gwaro reKuchengetedza, Mashandiro, uye Kugadzirisa Bhuku remitemo remuridzi weStealth Trailers, rine ruzivo rwakakosha rwekuchengetedza, kugadzirira kwekudhonza, nhungamiro dzekushanda, hurongwa hwekugadzirisa, uye kutarisira matai kuitira kuve nechokwadi chekushandiswa kwakachengeteka uye kwakavimbika.
	Stealth Charging Dock & Stand Quick Start Guide for Xbox Controllers This guide provides setup instructions, usage details, warranty information, and safety precautions for the Stealth Charging Dock & Stand designed for Xbox controllers. Learn how to charge your controllers efficiently and safely.
	Stealth Light Up XL Gaming Mat Kurumidza Kutanga Gaidhi Yepamutemo yekukurumidza kutanga gwara reStealth Chiedza Kumusoro XL Gaming Mat, ichipa mirairo yekumisikidza, ruzivo rwewaranti, kuchengetedzwa kwekuchengetedza, uye nerutsigiro rwekufonerana.
	Gwaro Rekutanga reStrath VR Series - Wedzera Ruzivo Rwako rweVR Gwaro rekutanga nekukurumidza rezvishongedzo zveStealth VR Series, zvikamu zvinotsanangura zvakadzama uye zvinoenderana nemahedhifoni eMeta Quest 2 neMeta Quest 3/3S. Tanga nekugadzira VR yako.
	Stealth XP-ECLIPSE Gaming Headset Quick Start Guide Quick start guide for the Stealth XP-ECLIPSE Gaming Headset, covering setup for PS4, Nintendo Switch, PC, Mobile, Tablet, and Xbox, along with controls, warranty, and support information.

Stealth JHT100