AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Safety Information

Verenga yambiro dzese dzekuchengetedza, mirairo, mifananidzo, uye zvakatemwa zvakapihwa nechigadzirwa ichi. Kutadza kutevedzera mirairo yese yakanyorwa pazasi kunogona kukonzera kuvhunduka kwemagetsi, moto, uye/kana kukuvara kwakanyanya.

• Nguva dzose pfeka maziso ekudzivirira kana uchishanda nemabhatiri.
• Usashandise chitangi chekusvetuka kana chakakuvara.
• Chengeta chinhu chinotanga kusvetuka kure nevana.
• Usafumise chigadzirwa kunaya kana kunaya mamiriro.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Chengetedza mudziyo munzvimbo inotonhorera, yakaoma kure nechiedza chezuva.

2. Package Zviri mukati

Ona kuti zvinhu zvese zviripo mupasuru yako:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart Jumper Cable
• 1 x USB-A kusvika USB-C Cable
• 1 x Kutakura Bhegi
• 1 x Pombi yePombi
• 3 x Mhepo Mabhomba
• 1 x Chinyorwa cheMushandisi

3. Chigadzirwa Pamusoroview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Zvinhu zvakakosha zvinosanganisira:

• 3000A Peak Current: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI Air Compressor: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Power Bank Basa: USB-A output and USB-C input for charging electronic devices.

4. Setup

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Operating Instructions

5.1. Svetuka Kutanga Mota

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Batanidza tsvuku clamp kune yakanaka (+) terminal yebhatiri remotokari uye cl nhemaamp kune iyo yakaipa (-) terminal.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Kushandisa Air Compressor

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Use the '+' and '-' buttons to set the target pressure.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Kushanda kweBank reMagetsi

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Chishandiso chinotanga kuchaja otomatiki.

5.4. LED Tochi

The 400-lumen LED light offers multiple modes for different situations.

• Dzvanya iyo lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Bata iyo lamp switch button to turn off the light.

6. Kuchengeta

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Geza mudziyo nemucheka wakaoma, wakapfava. Usashandise makemikari ane hasha kana abrasive zvinhu.
• Chengetedza munzvimbo inotonhorera, yakaoma. Dzivisa kupisa kwakanyanya.

7. Kugadzirisa matambudziko

• Mudziyo haubatike: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Mota isiri kutanga: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Kompresa yemhepo isingaputi: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Zvinotsanangurwa

9. Official Product Videos

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Warranty uye Tsigiro

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX website. Chengeta risiti yako yekutenga yezvichemo zvewaranti.