1. Nhanganyaya
The UNI-T UT361 is a professional digital anemometer designed for accurate measurement of wind speed, wind count, and temperature. This device is equipped with a split-type sensor for flexible positioning and features a clear LCD backlight display, data storage capabilities, and various measurement units to suit diverse professional applications.
Figure 1: UNI-T UT361 Digital Anemometer, showing the main display unit and the detached fan sensor.
2. Zvigadzirwa zveChigadzirwa
- Data Hold: Inomisa kuyerwa kwazvino pachiratidziro.
- LCD Backlight: Inowedzera kuonekwa mumamiriro epasi-chiedza.
- Temperature Units: Selectable between Celsius (℃) and Fahrenheit (℉).
- Auto Power Off: Automatically shuts down after approximately 10 minutes of inactivity (cancelable).
- Kuchengeta Data: Inochengeta kusvika ku2044 seti yedata rekuyera.
- Auto Record Function: Records data automatically at intervals from 0.5 to 255 seconds.
- Wearproof Fan Shaft: Designed for improved accuracy and long-term reliability.
- Mhepo Speed Modes: Displays Maximum (MAX), Minimum (MIN), and Real-time wind speed.
- Wind Count Modes: Displays Maximum (MAX), 2/3 Maximum, Minimum (MIN), Average (AVG), and Real-time wind count (CFM/CMM).
- Zvikamu zvinosarudzwa: Supports 7 units for wind speed and flow: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMM.
- USB Interface: For data transmission to a PC.
Mufananidzo 2: Kupfuuraview of key features for UNI-T UT361 and UT362 anemometers.
3. Setup
3.1 Kuiswa kwebhatiri
- Tsvaga mukamuri yebhatiri kuseri kweiyo main unit.
- Vhura chivharo chebhatiri.
- Insert one 9V alkaline battery (6F22) into the compartment, ensuring correct polarity.
- Vhara chivharo chebhatiri zvakachengeteka.
Mufananidzo 3: Kumashure view of the UT361, highlighting the battery compartment.
3.2 Kubatanidza Sensor
Connect the cable from the fan sensor to the designated port on the main unit. Ensure the connection is firm.
Mufananidzo 4: Mberi view of the UT361, showing the main unit and its connected fan sensor.
4. Kushanda
4.1 Simba On/Kudzima
Press the SIMBA button to turn the device on or off. The device will automatically power off after approximately 10 minutes of inactivity to conserve battery life. This feature can be disabled if continuous operation is required.
4.2 Kusarudza Zviyero zveKuyera
Press the UNIT button to cycle through the available wind speed and flow units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMM. Press the ℃ / ℉ button to switch between Celsius and Fahrenheit for temperature measurement.
4.3 Wind Speed and Wind Count Measurement
Position the fan sensor in the airflow. The current wind speed and temperature will be displayed on the LCD. Use the MAX/MIN bhatani kuti view maximum or minimum readings. The VEL/FLOW button switches between wind speed (VEL) and wind count (FLOW) display modes.
Figure 5: The UT361 in use, demonstrating its split-type design for flexible measurement.
4.4 Data Bata Basa
Press the BATA button to freeze the current reading on the display. Press it again to release the hold and resume live measurements.
4.5 Data Storage and Auto Record
The UT361 can store up to 2044 sets of data. Refer to the detailed operating manual for instructions on setting up the auto record function (intervals from 0.5 to 255 seconds) and retrieving stored data via the USB interface.
For data transmission to a PC, connect the device using the provided USB cable and utilize the PC software CD for data logging and analysis.
5. Kuchengeta
- Chengetedza mudziyo wakachena uye wakaoma. Shandisa nyoro, damp jira rekuchenesa; usashandise zvinochenesa zvinogumbura kana zvinonyungudutsa.
- Kana usingashandiswe kwenguva yakareba, bvisa bhatiri kudzivirira kubuda kwemvura.
- Store the anemometer in its carrying bag to protect it from dust and physical damage.
- Dzivisa kuisa mudziyo pakupisa kwakanyanya kana hunyoro hwakawanda.
- The fan shaft is wearproof, but avoid physical obstructions or excessive force on the impeller.
Figure 6: The UT361 anemometer with its standard accessories, including the carrying bag for protection.
6. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Mudziyo haubatike. | Bhatiri rakaderera kana rakafa; kuiswa kwebhatiri kusina kunaka. | Replace the 9V battery; ensure correct polarity. |
| Kurava kusina kururama. | Fan sensor obstructed or damaged; device not calibrated. | Check for obstructions around the fan; ensure the sensor is clean. If issues persist, contact support for calibration. |
| LCD backlight haisi kushanda. | Backlight function not activated; internal fault. | Ensure backlight is turned on (if applicable via a button, not explicitly mentioned but common). If not, contact support. |
| Data logging issues. | Incorrect auto record settings; USB connection problem; PC software issue. | Verify auto record interval settings. Check USB cable and PC software installation. |
7. Zvinotsanangurwa
| Parameter | Range (UT361) | Best Accuracy (UT361) |
|---|---|---|
| Wind Speed Measurement | 2m/s~10m/s 10m/s~30m/s | ±(3%+5) ±(3%+8) |
| Wind Count Measurement (CMM) | 0.001~9999 x 100 | ✓ |
| Wind Count Measurement (CFM) | 0.001~9999 x 100 | ✓ |
| Tembiricha Kuyera | 0℃~40℃ (32℉~104℉) | ±3℃(±4℉) |
| Ratidza Kuverenga | 9999 | |
| Data Hold | ✓ | |
| Auto Power Off | Around 10 Minutes | ✓ |
| Yakaderera Battery Chiratidzo | ≤7.2V | ✓ |
| MAX Maitiro | ✓ | |
| MIN Mode | ✓ | |
| Data Logging | 2044 | |
| USB Interface | ✓ | |
| Auto Record Time Setup | ✓ | |
| Units Switch | ✓ | |
| LCD Backlight | ✓ | |
| Mhepo Yekumhanyisa Chiratidziro | Display "VEL" | ✓ |
| Wind Count Display | Display "FLOW" | ✓ |
General Characteristics
- Simba: 9V Alkaline Battery (6F22)
- LCD saizi: 57mm x 37mm
- Muvara Wechigadzirwa: Tsvuku uye Gray
- Product Net Weight: 375g
- Kukura Kwechigadzirwa: 162mm x 78mm x 30mm
- Standard Accessories: Battery, USB Interface Cable, PC Software CD, Carrying Bag
- Standard Individual Packing: Gift Box, English Manual
Figure 7: Comprehensive specifications table for the UT360 series anemometers.
8. Official Product Video
Video 1: An unboxing and feature overview of the UNI-T UT361/UT362 Digital Wind Speed Meter. This video demonstrates the physical components and highlights key functionalities of the anemometer.
9. Warranty uye Tsigiro
For warranty information, technical support, or service inquiries, please refer to the contact details provided in the packaging or visit the official UNI-T website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kwezvichemo zvewaranti.
The product is certified with CE and UKCA, ensuring compliance with relevant European and UK standards.