McGrey BP-210 Complete Sound System User Manual

1. Nhanganyaya

Thank you for choosing the McGrey BP-210 Complete Sound System. This system is designed to provide high-quality audio for various applications, including rehearsals, seminars, small stages, and presentations. It features a powerful 4-channel mixer, two 10-inch passive speakers, a dynamic microphone, and all necessary cabling and stands for a complete setup. This manual provides essential information for the safe and efficient operation of your new sound system. Please read it thoroughly before initial use and retain it for future reference.

2. Mirayiridzo Yekuchengetedza

• Kuchengetedzwa Kwemagetsi: Always connect the system to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect from power during lightning storms or when unused for long periods.
• Kufefetedza Ensure adequate ventilation around the mixer and speakers. Do not block ventilation openings.
• Kuiswa: Place the system components on stable, level surfaces. Ensure speaker stands are fully extended and locked before mounting speakers.
• Tambo: Route all cables carefully to prevent tripping hazards and damage. Avoid placing heavy objects on cables.
• Kudzivirira Kunzwa: Prolonged exposure to high volume levels can cause permanent hearing damage. Use appropriate hearing protection when operating the system at high volumes.
• Sevhisi: Usaedze kushandira chigadzirwa ichi iwe pachako. Tumira masevhisi ese kuvashandi vanokwanisa.

3. Package Zviri mukati

Please check that all items listed below are present and in good condition:

• 1 x McGrey BP-210 4-Channel Mixer
• 2 x 10-inch Passive Speakers
• 2 x Mutauri Anomira
• 1 x Dynamic Microphone
• 2 x Speaker Cables
• 1 x Microphone Cable (XLR)
• 1 x Power Cable
• 1 x Remote Control for Media Player

Mufananidzo 3.1: Pamusoroview of the McGrey BP-210 Complete Sound System components, including the mixer, two speakers, two speaker stands, a microphone, and various cables.

4. Setup

4.1 Mixer Placement

Place the McGrey BP-210 mixer on a flat, stable surface, ensuring it is easily accessible for operation and has sufficient space for cable connections and ventilation.

4.2 Mutauri Setup

1. Extend the speaker stands to the desired height and ensure all locking mechanisms are securely fastened.
2. Carefully lift each 10-inch passive speaker and mount it onto the pole of a speaker stand. Ensure the speaker is stable on the stand.
3. Connect one end of a speaker cable to the speaker output on the mixer and the other end to the input on one of the passive speakers. Repeat for the second speaker.

Mufananidzo 4.1: A pedyo-up view of the two 10-inch passive speakers, highlighting their robust construction and grille design.

4.3 Microphone and Input Connections

1. Connect the dynamic microphone to one of the XLR inputs on the mixer using the provided microphone cable.
2. For other audio sources, use the appropriate inputs: balanced XLR for microphones, unbalanced 1/4" jack for line-level instruments, or RCA (cinch) for Line In on Channel 4.

Mufananidzo 4.2: Yakadzama view of the McGrey BP-210 mixer's control panel, showing input channels, equalization controls, and the integrated media player. Also visible are the included microphone and various connection cables.

4.4 Simba Connection

After all audio connections are made, connect the power cable to the mixer and then to a suitable power outlet. Ensure the mixer's master volume is set to minimum before powering on.

5. Operating Instructions

5.1 Kudzora Mixer

The BP-210 mixer features 4 input channels, each with dedicated controls:

• BASS / TREBLE: 2-band equalizer for adjusting the low and high frequencies of the input signal.
• LEVEL: Adjusts the individual channel volume.
• ZVINOITA: Controls the amount of internal hall effect applied to the channel.

Master Section Controls:

• TENZI VOLUME: Controls the overall output volume of the system.
• TAPE VOLUME: Adjusts the volume of the Tape input.
• DIGITAL DELAY: Controls for the integrated digital delay effect.

5.2 Media Player (USB/SD)

The integrated media player supports MP3 and WAV audio files from USB drives and SD cards.

1. Insert a USB drive or SD card into the designated slot on the mixer.
2. Use the media player controls (Play/Pause, Skip, Mode) to navigate and play your audio files.

5.3 Kubatana kweBluetooth

The mixer features Bluetooth connectivity for wireless audio streaming from compatible devices.

1. Press the 'Mode' button on the media player until 'Bluetooth' is selected.
2. Pane yako smartphone kana piritsi, gonesa Bluetooth uye tsvaga zvishandiso zviripo.
3. Select 'McGrey BP-210' (or similar) from the list to pair.
4. Once paired, you can stream audio wirelessly to the sound system.

Image 5.1: The McGrey BP-210 sound system set up in two different environments: a classroom for a presentation and a live band performance, demonstrating its versatility.

6. Kuchengeta

• Kuchenesa: Use a soft, dry cloth to clean the surfaces of the mixer and speakers. Do not use liquid cleaners or solvents.
• Kuchengeta: When not in use, store the system in a dry, dust-free environment. It is recommended to use the original packaging or protective covers for transport and storage.
• Cable Care: Regularly inspect all cables for signs of wear or damage. Replace any damaged cables immediately.

7. Kugadzirisa matambudziko

8. Zvinotsanangurwa

• Brand: McGrey
• Muenzaniso: BP-210
• Simba Kuburitsa (RMS): 50 Watts
• Mixer Channels: 4
• Rudzi rweMutauriri: Passive, 10-inch woofer
• Kubatana: Bluetooth, USB, SD Card, XLR, 1/4" Jack, RCA (Cinch)
• Chiyero: 2-band (Bass, Treble) per channel
• Mhedzisiro: Integrated Hall Effect, Digital Delay
• Kunobva Simba: Electric Cable

9. Warranty uye Tsigiro

Information regarding warranty coverage and customer support for the McGrey BP-210 Complete Sound System is typically provided at the point of purchase or within separate documentation included with your product. Please refer to those resources for details on warranty periods, claims procedures, and contact information for technical assistance.