Lanzar VIBE452N.6 6000 Watt 4-Channel Mota Audio AmpLifier Instruction Manual

Nhanganyaya

Thank you for choosing the Lanzar VIBE452N.6 4-Channel Car Audio Amplifier. Bhuku rino rinopa mirairo yakadzama yekuisa, kushandisa, uye kugadzirisa zvakanaka midziyo yako. amplifier. Ndapota verenga bhuku rino zvizere usati waedza kuisa kana kushandisa kuti uve nechokwadi chekuti inoshanda zvakanaka uye yakachengeteka.

Ruzivo Rwakakosha Chekuchengetedza

• Gara uchibvisa chiteshi chemotokari chisina bhatiri usati watanga kuisa chero chinhu.
• Iva nechokwadi chekuti waya dzese dzakarongwa zvakanaka uye dzakachengetedzwa kudzivirira kukuvara kana mashort circuits.
• Use appropriate gauge wiring for power and ground connections to handle the amplifier's current draw.
• Mount the amplifier yakachengeteka munzvimbo inobvumira mhepo yakakwana uye yakadzivirirwa kubva kuhunyoro nekupisa kwakanyanya.
• If you are unsure about any part of the installation process, seek assistance from a professional car audio installer.
• Usashandise iyo amplifier if it is damaged or malfunctioning.

Chii chiri muBhokisi

Please check the contents of your package. If any items are missing or damaged, contact your dealer immediately.

This image displays the typical contents included with the Lanzar VIBE452N.6 amplifier: iyo amplifier unit, a remote subwoofer level control, connection cables, and mounting screws.

• Lanzar VIBE452N.6 4-Channel Amplifier
• Remote Subwoofer Bass Control
• Quick Start Guide
• Mounting Screws
• Connection Cables (as pictured)

Product Features

The Lanzar VIBE452N.6 amplifier is engineered with advanced features for high-quality car audio performance:

• High Power Output: Delivers 4 x 1250 Watts RMS @ 4 Ohms, 4 x 1500 Watts Max @ 4 Ohms, 2 x 3000 Watts Max @ 4 Ohms Bridged, and 4 x 2000 Watts @ 2 Ohms RMS.
• Simba reMOSFET: Features a regulated PWM-type power supply that automatically maintains rated power across varying battery voltages.
• Variable Input Level Controls: Independent controls for each pair of channels allow precise gain matching.
• Variable Crossover Controls: High-Pass and Low-Pass crossover controls for precise audio frequency management.
• High-Efficiency Heatsink: Heavy aluminum heatsink design ensures efficient heat dissipation for stable operation.
  

  This image highlights the robust aluminum heatsink, designed for efficient thermal management of the amplifier.

• Remote Subwoofer Bass Control: Allows convenient adjustment of subwoofer bass levels from the driver's seat.
  

  This image shows the remote bass control knob, which allows users to adjust the bass boost from 0 to 18 dB at 60 Hz.

• Electronic Crossover Network: Integrated crossover for precise frequency distribution.
• Bass Boost Circuit: Enhances low-frequency output.
• Bridgeable at 4 Ohms: Offers flexibility for various speaker configurations.
• 2 Ohm Stereo Yakagadzikana: Ensures compatibility with a wide range of speakers.
• Tri-Mode Capable: Supports simultaneous stereo and mono operation.
• Silver RCA Inputs and Line Outs: High-quality connectors for signal integrity and multi-amplifier setups.
• Power Protection LED Indicators: Visual indicators for operational status and protection modes.
• Dziviriro Yepamusoro: Safeguards the amplifier from overload, short circuits, and thermal issues.
• Soft Turn On/Off: Prevents pops and thumps during power cycling.

Setup uye Installation

Kuiswa kwakaringana kwakakosha pakuita uye hupenyu hurefu hwako ampTevedzera matanho aya nokungwarira.

1. Kuisa Amplifier

Choose a mounting location that is dry, well-ventilated, and secure. Ensure there is enough space around the amplifier for air circulation, especially around the heatsink. Avoid mounting it directly on carpet or in enclosed spaces without airflow.

This image illustrates the dimensions of the Lanzar VIBE452N.6 amplifier: 20.47 inches in length, 10.25 inches in width, and 2.36 inches in height. These measurements are important for planning the installation location.

1. Maka maburi anokwirisa uchishandisa iyo amplifier se template.
2. Dhonza maburi ekutyaira kana zvichidikanwa.
3. Chengetedza iyo amplifier uchishandisa iyo yakapihwa yekuisa screws.

2. Kubatana kweSimba nePasi

These connections are critical for amplifier performance and safety. Use appropriate gauge wiring (e.g., 4-gauge for power and ground) and ensure secure, corrosion-free connections.

• Simba (BATT+): Connect a fused power cable directly from the positive terminal of your vehicle's battery to the BATT+ terminal on the amplifier. The fuse holder should be located within 18 inches of the battery.
• Pasi (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface of the vehicle's chassis. Ensure a solid electrical connection.
• Kubatidza kure kure (REM): Batanidza waya yemagetsi iri kure kubva pamagetsi emagetsi emusoro weyuniti yako kuenda kuREM terminal iri pa ampWaya iyi inotaridza kuti amplifier yekuvhura nekudzima nehead unit yako.

3. Kubatanidza RCA Input

Connect the RCA output cables from your head unit to the corresponding RCA input jacks on the amplifier (CH1/2 and CH3/4).

4. Mutauri Zvibatanidza

Batanidza vatauri vako kune amplifier's speaker terminals. Pay close attention to polarity (+ and -). The VIBE452N.6 is a 4-channel amplifier, allowing for various configurations:

• Stereo ye4-Channel: Connect four speakers, one to each channel output.
• 2-Channel Bridged: Bridge two channels to power two subwoofers or high-power speakers. Refer to the amplifier's terminal markings for bridged connections.
• Tri-Mode: A combination of stereo and bridged modes.

Ensure the total impedance of your speakers matches the amplifier's capabilities (2 Ohm stereo stable, 4 Ohm bridged stable).

This image shows the Lanzar VIBE452N.6 amplifier installed in a vehicle's trunk, connected to subwoofers, demonstrating a typical installation scenario.

5. Remote Subwoofer Bass Control Connection

Connect the remote bass control module to the designated "REMOTE" port on the amplifier. Mount the control module in a convenient location for easy access.

Operating Instruction

1. Yekutanga Simba-Kukwira

After all connections are made, reconnect the vehicle's battery. Turn on your head unit. The amplifier's power indicator LED should illuminate, indicating it is receiving power and is operational.

2. Setting Input Level (Gain)

The input level controls (GAIN) match the amplifier's input sensitivity to the output of your head unit. Incorrect gain settings can lead to distortion or reduced dynamic range.

1. Tanga ne amplifier's gain controls set to minimum.
2. Isa vhoriyamu yeyuniti yako yemusoro kusvika pa75-80% yehuwandu hwayo hwepamusoro.
3. Zvishoma nezvishoma wedzera iyo amplifier's gain control until you hear slight distortion, then back it off slightly.
4. Repeat for all channels.

3. Crossover Adjustment (HIGH/LOW PASS)

The variable high-pass and low-pass crossovers allow you to direct specific frequency ranges to your speakers or subwoofers.

• High-Pass Sefa (HPF): Used for full-range speakers to block low frequencies that they cannot reproduce effectively, preventing distortion and improving clarity. Adjust the HPF frequency to suit your speakers.
• Sefa yepasi-Pass (LPF): Used for subwoofers to block high frequencies, ensuring they only reproduce bass. Adjust the LPF frequency to blend smoothly with your full-range speakers.

4. Bass Boost Control

The bass boost circuit provides additional low-frequency enhancement. Use this feature sparingly to avoid distortion and potential speaker damage. The remote bass control allows for convenient adjustment.

5. Bridged Mode Operation

When operating in bridged mode, ensure the connected speaker or subwoofer has an impedance of 4 Ohms or higher. Refer to the wiring diagram in the Quick Start Guide for correct connections.

Maintenance

• Kuchenesa: Nguva nenguva pukuta ampjira rakapfava uye rakaoma. Usashandise makemikari akaomarara kana zvinhu zvinochenesa zvinogumbura.
• Kufefetedza Ensure the heatsink fins remain clear of dust and debris to maintain proper cooling.
• Connections: Periodically check all power, ground, RCA, and speaker connections for tightness and corrosion. Loose connections can cause performance issues or damage.
• Fuse Replacement: If a fuse blows, replace it only with a fuse of the same type and rating (30A x 3). Using an incorrect fuse can cause serious damage or fire.

Kugadzirisa matambudziko

Zvinotsanangurwa

Warranty uye Support

For warranty information or technical support, please refer to the contact details provided in your Quick Start Guide or visit the official Lanzar website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kwezvichemo zvewaranti.