MIOBLUE 3-Pack Battery Operated Picture Light Instruction Manual

1. Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of your MIOBLUE 3-Pack Battery Operated Picture Lights. Please read this manual thoroughly before use to ensure proper function and safety.

Image 1.1: MIOBLUE 3-Pack Picture Lights with Remote Controls. This image displays three gold-colored, circular picture lights designed to illuminate artwork, along with two remote controls for operation.

2. Package Zviri mukati

Tarisa uone kuti zvese zvirimo mupasuru yako:

• 3 x MIOBLUE Battery Operated Picture Lights (Gold)
• 2 x Remote Controls
• Mabhureki neSikuruu Zvekugadzika
• Bhuku reMirayiridzo

Note: 3 AA batteries per light are required and not included in the package.

3. Zvinotsanangurwa

4. Safety Information

• Ita shuwa kuti mabhatiri akaiswa aine polarity chaiyo (+/-).
• Usasanganise mabhatiri ekare uye matsva, kana marudzi akasiyana emabhatiri.
• Remove batteries if the lights will not be used for an extended period.
• Chengetedza mabhatiri kure nevana.
• Do not expose the lights to water or excessive moisture. These lights are not water resistant.
• Do not attempt to disassemble or modify the lights.

5. Setup uye Kuiswa

5.1. Kuiswa kwebhatiri

1. Gently twist the back cover of the picture light counter-clockwise to open the battery compartment.
2. Isa 3 AA mabhatiri (asina kuisirwa) mukamuri, kuve nechokwadi chechokwadi polarity.
3. Replace the back cover by twisting it clockwise until secure.

Image 5.1: Installation and Control Overview. This image illustrates how to install batteries, use manual and remote controls, set the timer, install with screws, and utilize the magnetic attachment feature.

5.2. Kuisa Mwenje

The MIOBLUE Picture Lights offer two primary mounting options:

Option 1: Screw Installation (Permanent)

1. Choose the desired location for your picture light.
2. Position the mounting bracket against the wall and mark the screw holes.
3. Dhonza maburi ekutyaira kana zvichidikanwa.
4. Chengetedza bhaketi yekukwira kumadziro uchishandisa screws dzakapihwa.
5. The picture light unit has a strong magnetic base. Attach the light magnetically to the installed bracket.

Option 2: Magnetic Attachment (Temporary/Adjustable)

The lights feature a strong magnetic base, allowing them to be attached directly to any metallic surface without the need for screws. This is ideal for temporary placement or frequent adjustments.

6. Operating Instructions

Your MIOBLUE Picture Lights can be controlled via the included remote control or by manual touch.

6.1. Remote Control Kushanda

Ensure the remote control has batteries installed (typically CR2025, not included, or check remote for battery type). Point the remote towards the light for optimal response.

• VABISA/KUDZIMA: Press the ON bhatani rekubatidza mwenje, uye DZIMA bhatani kuidzima.
• Kugadzirisa Kupenya: Shandisa iyo + uye - buttons to increase or decrease brightness (10% to 100%).
• Preset Brightness: Buttons labeled 30%, 50%, 100% allow quick selection of brightness levels.
• Rura rweTembiricha Sarudzo:
  • Chiedza Chinodziya (3000K): Provides a soft, cozy glow.
  • Natural White Light (4000K): Offers a balanced, neutral illumination.
  • Chiedza Chichena Chinotonhorera (6000K): Delivers a bright, crisp light.
• Basa renguva: Press the 15MIN, 30MIN, 60MIN, kana 120MIN buttons to set the light to automatically turn off after the selected duration.

Image 6.1: Lighting Modes and Brightness Adjustment. This image illustrates the three available color temperatures (warm, natural white, cool white) and the adjustable brightness range from 10% to 100%.

6.2. Kudzora Kubata Nemaoko

The light can also be controlled by touching the surface of the light unit:

• Batidza/Kudzima: A short touch will cycle the light on or off.
• Chinja Tembiricha Yeruvara: Continue short touching to cycle through the three color temperature modes (Warm, Natural White, Cool White).
• Gadzirisa Kupenya: A long press on the light surface will gradually adjust the brightness. Release to set the desired level.

Image 6.2: Control Methods. This image demonstrates both remote and manual touch control options, highlighting the timer and battery-operated features.

7. Kuchengeta

7.1. Kuchenesa

Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7.2. Kutsiviwa kwebhatiri

When the light output diminishes or the light stops responding, it is time to replace the batteries. Follow the steps in Section 5.1 for battery installation.

8. Kugadzirisa matambudziko

9. Warranty uye Tsigiro

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official MIOBLUE website. Ndapota chengetedza risiti yako yekutenga yezvichemo zvewaranti.