Bhuku rekushandisa reACEZUK M01 5000A reMota Inotakurika Jump Starter

1. Nhanganyaya

Thank you for choosing the ACEZUK M01 Portable Car Jump Starter. This device is designed to provide emergency jump-starting for 12V vehicles (up to 7.0L gasoline or 5.5L diesel engines) and also functions as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and proper operation.

2. Safety Information

WARNING: Improper use may result in damage to the device, vehicle, or personal injury. Always follow these safety guidelines.

• Do not attempt to jump start vehicles with engines larger than specified (7.0L gas, 5.5L diesel).
• Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.
• Batanidza clamps correctly: Red clamp to positive (+) terminal, Black clamp to negative (-) terminal. Reverse polarity can cause damage.
• Remove the jump starter clamps from the vehicle battery within 30 seconds after the engine starts.
• Usabatanidza tsvuku uye dema clamps pamwe chete.
• Do not expose the device to extreme temperatures (below -20℃ or above 60℃), direct sunlight, or water.
• Chengetedza pasingasvikirwi nevana.
• Kana mudziyo wacho ukanyanya kupisa panguva yekushandisa, mira kushanda ipapo ipapo.

3. Package Zviri mukati

Ona kuti zvinhu zvese zviripo mupasuru yako:

• 1 x ACEZUK M01 Jump Starter
• 1 x Smart Jumper Cable with Clamps
• 1 x USB-C Yekuchaja Cable
• 1 x Chinyorwa cheMushandisi
• 1 x Kuchengeta Bhegi

Image: Package contents of the ACEZUK M01 Jump Starter.

4. Chigadzirwa Pamusoroview

The ACEZUK M01 is a versatile device featuring multiple functionalities:

• 5000A Peak Current: Capable of jump-starting 12V vehicles with up to 7.0L gas or 5.5L diesel engines.
• 2.5-inch LCD Ratidza: Shows real-time power level, charging status, and temperature protection indicator.
• Multifunction LED Light: Features three modes: illumination, strobe, and SOS for various emergency situations.
• Bhengi reMagetsi re12800mAh: Equipped with 1 USB output (5V/2.4A) and 1 Type-C input/output (5V/2A, 9V/2A) for charging mobile devices.
• Smart Jumper Clamps: Incorporate 8 advanced protection technologies for safe operation.

Image: ACEZUK M01 Jump Starter and accessories.

Image: Labeled diagram of the ACEZUK M01 Jump Starter's components.

5. Setup uye Kuchaja

5.1 Kutanga Kuchaja

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even if not in use.

• Batanidza yakapihwa USB-C yekuchaja tambo kune Type-C yekupinza chiteshi pane yekusvetuka tangidza.
• Connect the other end of the USB-C cable to a 5V/2.4A (or higher) USB wall adapter (not included).
• The LCD display will show the charging progress. The device is fully charged when the display shows 100%.

Image: Charging the ACEZUK M01 Jump Starter.

6. Operating Instructions

6.1 Svetuka Kutanga Mota

Ensure the jump starter has at least 50% charge before attempting to jump start.

1. Isa Jumper Cable: Plug the smart jumper cable into the EC5 output port on the jump starter. Ensure a secure connection.
2. Batanidza Clamps: Batanidza iyo tsvuku (+) clamp kune terminal yakanaka yebhatiri remotokari. Batanidza dema (-) clamp to the negative terminal of the vehicle's battery. The smart cable indicator light should turn green, indicating a safe connection.
3. Kutanga Injini: Return to your vehicle and start the engine.
4. Bvisa Clamps: Kana injini yangotanga, bvisa cl ipapo ipapoamps from the vehicle battery within 30 seconds. First, remove the black (-) clamp, kozoita tsvuku (+) clamp. Disconnect the smart cable from the jump starter.

Image: Step-by-step guide for jump starting a vehicle.

6.2 Kushandisa sePower Bank

The ACEZUK M01 can charge various USB-powered devices.

• Connect your device's charging cable to the USB output port (5V/2.4A) or the Type-C port (5V/2A, 9V/2A) on the jump starter.
• The LCD display will indicate that charging is active.

Image: Using the jump starter to charge mobile devices.

6.3 Kushandisa mwenje we LED

The integrated LED light has three modes for different situations.

• Press and hold the power button for 3 seconds to turn on the LED light (illumination mode).
• Press the power button once to switch to strobe mode.
• Press the power button again to switch to SOS mode.
• Press and hold the power button for 3 seconds to turn off the LED light.

Image: LED flashlight modes.

7. Kuchengetedza nekuchengetedza

• Geza mudziyo nemucheka wakaoma, wakapfava. Usashandise makemikari ane hasha kana abrasive zvinhu.
• Store the jump starter in its protective bag in a cool, dry place, away from direct sunlight and moisture.
• Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• Chengeta clampYakachena uye haina ngura.

8. Kugadzirisa matambudziko

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

ACEZUK provides a 2-year warranty for this product. For any missing parts, technical support, or other issues, please contact ACEZUK customer service via Amazon. Our customer service team is available 24/7 to assist you.