1. Nhanganyaya
This manual provides detailed instructions for the setup, operation, and maintenance of your Edifier D32 Tabletop Bluetooth Speakers. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Mufananidzo 1.1: Mberi view of the Edifier D32 Tabletop Bluetooth Speaker.
2. Zvigadzirwa zveChigadzirwa
- Superior Sound Quality: Equipped with 60W RMS total output power, dual 1-inch silk dome tweeters, and 4-inch long-throw mid-low drivers for rich, room-filling stereo sound.
- Advanced Bluetooth Connectivity: Features Bluetooth V5.3 with LDAC codec support, enabling high-resolution audio streaming up to 24bit/96kHz from compatible Android devices.
- Multi-Point Connection: Allows simultaneous connection of two Bluetooth devices, facilitating seamless switching between audio sources.
- Hupenyu Hwebhatiri Hwakawedzerwa: Integrated 5200mAh high-capacity battery provides up to 11 hours of continuous playback on a single charge.
- Versatile Wireless Transmission: Includes a 5GHz and 2.4GHz dual-band Wi-Fi module with AirPlay2 support for Wi-Fi music streaming and multi-room audio system creation with multiple D32 speakers.
Figure 2.1: Illustration of the internal speaker components, highlighting the drivers.
Figure 2.2: Depiction of the advanced digital signal processing chip.
3. Package Zviri mukati
Ndapota tarisa zviri mupakeji kana wabvisa zvinhu mubhokisi. Kana paine zvinhu zvisipo kana kuti zvakakuvara, taura nemutengesi wako.
- Edifier D32 Tabletop Bluetooth Speaker
- Power Cable
- Audio Cable (3.5mm to 3.5mm)
- USB Cable
- Mushandisi Chinyorwa (gwaro iri)
Figure 3.1: Edifier D32 speaker, packaging, and accessories.
4. Setup
4.1 Simba Connection
- Connect the power cable to the AC input port on the rear of the speaker.
- Plug the other end of the power cable into a standard wall outlet (100-240V ~ 50/60Hz).
- Press the power button on the speaker to turn it on. The indicator light will illuminate.
4.2 Kutanga Kuiswa
Place the speaker on a stable, flat surface. For optimal sound performance, ensure there are no obstructions directly in front of the speaker's grille.
Figure 4.1: Recommended placement of the speaker on a stable surface.
Figure 4.2: Rear panel with power input, AUX IN, and USB IN ports.
5. Operating Instructions
5.1 Kudzora Mabhatani
The control buttons are located on the front panel of the speaker.
Mufananidzo 5.1: Kupfuuraview of control buttons and their functions.
- Power-on/off, Source switch: Press to power on/off, short press to cycle through input sources (Bluetooth, Wi-Fi, AUX, USB).
- Bluetooth connection control: Dzvanya uye ubate kuti uise Bluetooth pairing mode.
- Play/Pause, Mute/Unmute, WAC setup: Controls playback, mutes audio, or initiates Wireless Acoustic Calibration setup.
- Volume down, Previous track: Dzvanya kwenguva pfupi kuti vhoriyamu ideredzwe, tinya kwenguva refu kuti uone rwiyo rwekare.
- Volume up, Next track: Kudzvanya kupfupi kukwidza vhoriyamu, dzvanya kwenguva refu kune inotevera track.
5.2 Makaralı Mode
- Turn on the speaker and select Bluetooth mode by pressing the source switch button until the Bluetooth indicator light illuminates.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "EDIFIER D32".
- Select "EDIFIER D32" to pair. Once connected, the indicator light will remain solid.
- For multi-point connection, repeat steps 2 and 3 with a second Bluetooth device.
Figure 5.2: Bluetooth V5.3 with LDAC support for high-fidelity audio.
5.3 Wi-Fi Mode (AirPlay2)
- Ensure the speaker is connected to power and turned on.
- On your iOS device, open the Wi-Fi settings and select "EDIFIER D32" under "SET UP NEW AIRPLAY SPEAKER...".
- Follow the on-screen prompts to connect the speaker to your home Wi-Fi network.
- Once connected, you can stream audio via AirPlay2 from any compatible device on the same network.
- Multiple D32 speakers can be grouped for a multi-room audio experience via the Edifier ConneX App.
5.4 AUX Input Mode
- Connect one end of the 3.5mm audio cable to the AUX IN port on the rear of the speaker.
- Connect the other end of the 3.5mm audio cable to the audio output jack of your source device (e.g., computer, MP3 player).
- Press the source switch button on the speaker until the AUX indicator light illuminates.
5.5 USB Input Mode
- Connect the USB cable to the USB IN port on the rear of the speaker.
- Connect the other end of the USB cable to a USB audio output port on your computer or other compatible device.
- Press the source switch button on the speaker until the USB indicator light illuminates.
5.6 Edifier ConneX App
Download the Edifier ConneX App from your device's app store for enhanced control, equalization adjustments, and multi-room setup features.
Figure 5.3: Edifier ConneX App for advanced control.
6. Kuchengeta
- Kuchenesa: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners, waxes, or solvents.
- Kuchengeta: Kana isingashandiswi kwenguva yakareba, chengeta mukurukuri munzvimbo inotonhorera, yakaoma pasina chiedza chezuva uye tembiricha yakanyanyisa.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in active use.
- Kufefetedza Ensure proper ventilation around the speaker to prevent overheating. Do not block any vents.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Hapana simba | Power cable not connected; Battery depleted. | Ensure power cable is securely connected and plugged into a live outlet. Charge the speaker if using battery power. |
| Hapana ruzha | Incorrect input source selected; Volume too low; Device not paired (Bluetooth); Cable not connected (AUX/USB). | Select the correct input source. Increase volume on both speaker and source device. Re-pair Bluetooth device. Check cable connections. |
| Kubatana kweBluetooth hakuna kugadzikana | Device too far from speaker; Interference. | Move device closer to the speaker. Avoid placing speaker near other wireless devices that may cause interference. |
| Wi-Fi nyaya dzekubatanidza | Incorrect Wi-Fi password; Router issues; Speaker out of range. | Verify Wi-Fi password. Restart router. Move speaker closer to Wi-Fi router. |
| Hupenyu hupfupi hwebhatiri | Battery not fully charged; High volume usage. | Ensure battery is fully charged before use. Lower volume to extend battery life. |
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Number | D32white |
| Brand | Edifier |
| Total Output Power | 60W RMS |
| Tweeter | Dual 1" Silk Dome Tweeters |
| Mid-Low Driver | 4" Long-Throw Mid-Low Drivers |
| Bluetooth Version | V5.3 (with LDAC codec support) |
| Wi-Fi | 5GHz and 2.4GHz Dual-Band (AirPlay2 compatible) |
| Battery Capacity | 5200mAh Lithium Ion |
| Nguva yekutamba | Kusvikira kumaawa makumi maviri nemashanu |
| Kuchaja Port Type | USB |
| Chigadzirwa Zviyero (W x H x D) | 16.2 x 25 x 17.9 cm |
| Item Weight | 3.1 kg |
| Material | Wood (Holz) |
9. Warranty uye Tsigiro
Edifier products come with a standard warranty. Please refer to the warranty card included in your package for specific terms and conditions, or visit the official Edifier websaiti yeruzivo rwakadzama nezvewarandi.
For technical support, troubleshooting assistance, or service inquiries, please contact Edifier customer support through their official webwebhusaiti kana ruzivo rwekuonana rwuri mupakeji yechigadzirwa chako.
- Warranty Period: Typically 1 year from the date of purchase.
- Returns Policy: Refer to your retailer's policy, typically 30 days for refunds/replacements.
- Rutsigiro rwepamhepo: Visit www.nonet.com for FAQs, drivers, and support contact.
