1. Nhanganyaya
The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.
Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.
Zvinokosha:
- Support for rear-side connector mainboards.
- Front and side tempered glass panels.
- Includes three M25-120mm D-RGB fans.
- Supports up to nine 120mm fan positions.
- Dedicated 360mm radiator support in the top panel.
- Accommodates large graphics cards.
2. Package Zviri mukati
Tarisa kuti zvese zvirimo zviripo mupakeji:
- XT View Chassis (Black)
- Storage Bracket (1x)
- M25-120_DBK Fan (3x)
- D-RGB Controller (1x)
- Triple SSD Bracket (1x)
- Side D-RGB LED strip (1x)
- Accessory Box containing:
- Zip ties (30x)
- MB/SSD Screws (30x)
- Zvikurukuru zvegumwe (4x)
- HDD Screws (8x)
- Standoff Tool (1x)
- MB Standoff (1x)
- PSU Screws (4x)
- 30mm Fan Screws (12x, UNC6-32)
3. Setup uye Kuiswa
Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View chisiki.
3.1. Kugadzirira Chassis
- Bvisa zvinhu: Bvisa chassis nokungwarira kubva pakurongedza kwayo.
- Bvisa mapaneru: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.
Mufananidzo 3.1: Mukati view of the XT View chassis, ready for component installation.
3.2. Motherboard Installation
- Isa Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
- Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
- Bhodhi reMotherboard rakachengeteka: Use the provided MB screws to secure the motherboard to the chassis.
3.3. Kuiswa kweChigadziko cheMagetsi (PSU)
- Chinzvimbo chePSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
- PSU Yakachengeteka: Fasten the PSU to the chassis using the provided PSU screws.
3.4. Kuisa Dhiraivha Yekuchengetera Zvinhu
The chassis supports 3.5" HDDs and 2.5" SSDs.
- 3.5" HDD: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
- 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).
Secure drives with the appropriate screws.
3.5. Kuiswa kweKadhi rekuwedzera (GPU)
- Bvisa Slot Covers: Bvisa zvivharo zvekuwedzera zvinodiwa kubva kumashure kwechasisi.
- Isa Kadhi: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
- Secure Card: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).
Image 3.2: Rear interior view highlighting expansion slots and fan mounting points.
3.6. Fan uye Radiator Installation
The chassis supports various fan and radiator configurations:
- 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
- 140mm Fan Locations: Top (2x), Rear (1x).
- Liquid Cooling Radiator Support:
- Side: Up to 240mm (with Vertical GPU only).
- Top: Up to 360mm.
- Rear: Up to 120mm.
Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.
3.7. Cable Management
Shandisa nzira dzinoshandiswa pakuronga tambo uye nzvimbo dzinobatanidza tambo dziri kuseri kwetireyi yemotherboard kuronga tambo. Izvi zvinovandudza kufamba kwemhepo uye runako rwayo.
Mufananidzo 3.3: Kumashure view illustrating cable management space.
3.8. Mberi I/O Zvisungo
Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:
- USB 3.0 musoro
- USB-C 3.2 Gen2 Type-E header
- HD-Audio header
- Power switch, Reset button, D-RGB color button, D-RGB mode button headers
- D-RGB expansion header (for additional D-RGB devices)
4. Operating Instructions
4.1. Simba On / Off
Press the Bhatani reSimba located on the top front panel to turn the system on or off.
4.2. Front Panel Connectivity
Panera repamberi reI/O rinopa mukana uri nyore wekuwana:
- 1x USB 3.0 chiteshi
- 1x USB-C 3.2 Gen2 port
- Microphone/Headphone Combo jack
Image 4.1: Front I/O panel on the top of the chassis.
4.3. D-RGB Control
The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.
5. Kuchengeta
5.1. Kuchenesa Mafirita Eguruva
Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.
- Bvisa Mafirita: Gently slide out or unclip the dust filters.
- Kuchenesa: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
- Reinstall: Place the clean, dry filters back into their positions.
5.2. General Cleaning
For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.
6. Kugadzirisa matambudziko
Ichi chikamu chinotarisa zvinowanzoitika zvaungasangana nazvo.
6.1. System Does Not Power On
- Simba Kubatana: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
- Motherboard Connections: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
- Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.
6.2. D-RGB Lighting Not Functioning
- D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
- Motherboard Sync: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
- Bhatani Basa: Test the D-RGB color and mode buttons on the front panel.
6.3. Fan Noise or Malfunction
- Connections: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
- Zvipingamupinyi: Check for any cables or objects obstructing fan blades.
- Guruva: Clean any dust buildup on fan blades.
7. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Model Name | XT View |
| Model Number | PH-XT523V1_DBK01 |
| Fomu Factor | Mid-Tower |
| Dimensions (DxWxH) | 440 x 230 x 500 mm (17.32 x 9.05 x 19.68 inches) |
| Zvishandiso | Steel Chassis, Tempered Glass Window, ABS Plastic |
| Motherboard Support | ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide) |
| Mberi I/O | 1x USB 3.0, 1x USB-C 3.2 Gen2, Microphone/Headphone Combo, Power Button, Reset Button, D-RGB Color Button, D-RGB Mode Button |
| Kuwedzera Slots | 7 |
| Yemukati 3.5" Drive Bays | 2x (1x if 2x SSD installed) |
| Yemukati 2.5" Drive Bays | 2x (0x if 2x HDD installed) |
| Included Fans | 3x M25-120 D-RGB Fans |
| Fan Support (120mm) | Right Side (2x), Top (3x), Rear (1x), Midplate (3x) |
| Fan Support (140mm) | Top (2x), Rear (1x) |
| Liquid Cooling Support (120mm Radiator) | Side (Up to 240mm with Vertical GPU), Top (Up to 360mm), Rear (Up to 120mm) |
| Kureba kweMax GPU | 415mm |
| Max GPU Width | 184mm |
| Max CPU Inotonhorera Kureba | 184mm |
| Kureba kweMax PSU | 270mm |
| Item Weight | 13.7 makirogiramu |
8. Tsigiro neWarranty
For additional information, technical support, or warranty inquiries, please visit the official Phanteks websaiti:
Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.
