Sure-Lites APC7RG

Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light User Manual

Model: APC7RG

1. Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light. This unit is designed to meet code requirements for emergency egress lighting in commercial buildings, offering both an illuminated exit sign and emergency lighting with adjustable LED heads.

Eight Sure-Lites All-Pro APC7RG Combination LED Exit Signs and Emergency Lights

Mufananidzo 1.1: Pamusoroview of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light units.

2. Safety Information

Please read and understand all instructions before installation and operation. Retain this manual for future reference.

  • Kuchengetedzwa Kwemagetsi: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
  • Product Kutendeseka: Do not modify or alter the product. Use only manufacturer-specified replacement parts.
  • Nzvimbo: This unit is UL certified and damp location listed. Ensure the installation environment is suitable.
  • Bhatiri: The unit contains a nickel-cadmium battery. Dispose of batteries according to local regulations.

3. Package Zviri mukati

Tarisa kuti zvese zviriko zviripo usati watanga kuisa:

  • Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light Unit
  • Snap-fit canopy with captive mounting screws
  • Directional chevrons (snap-in/snap-out)
  • Installation hardware (screws, wire nuts)
  • Nickel Cadmium Battery (pre-installed or separate)

4. Setup uye Kuiswa

The APC7RG is designed for easy installation with universal J-box mounting and snap-fit construction, allowing for installation in under 5 minutes.

4.1 Mounting Sarudzo

The unit offers universal surface mounting flexibility and can be configured for:

  • Ceiling mount
  • Wall mount
  • End mount

It supports configurable single or double faces.

Diagram showing easy installation features: snap-fit construction, ceiling/wall/back mount, 90 minutes run time, and 17 feet egress coverage.

Image 4.1: Key installation and performance features.

4.2 Wiring

  1. Ita shuwa kuti simba AKADZIMWA pane circuit breaker.
  2. Connect the unit's wiring to the building's AC power supply (120V) according to local electrical codes.
  3. Secure the unit to the universal J-box using the provided hardware and snap-fit canopy.

4.3 Field Selectable Features

The APC7RG exit face is illuminated with long-lasting LEDs that are field selectable for red or green letters. The unit is pre-set to red letters and can be easily changed to green letters during installation. Snap-in/snap-out directional chevrons (arrows) can also be configured to indicate the direction of egress.

Diagram showing components of the exit sign: selectable single or double faces, snap-in/snap-out directional chevrons, high impact UV resistant housing, nickel cadmium battery, field selectable red or green LEDs and inserts, and long life LEDs.

Mufananidzo 4.2: Yakaputika view highlighting field-selectable features and components.

Two images showing the exit sign in different commercial settings, one with red letters and one with green letters, demonstrating the selectable faces feature.

Mufananidzo 4.3: Eksample of selectable red or green exit sign faces in commercial environments.

5. Operating Instructions

5.1 Kujairika Kushanda

When AC power is supplied, the LED exit sign will illuminate, and the battery will charge. A power indicator light (usually green) located on the bottom of the exit sign will confirm AC power is present and the battery is charging.

5.2 Emergency Operation

In the event of an AC power failure, the unit will automatically switch to battery backup mode. The exit sign and emergency lights will operate for a minimum of 90 minutes, providing up to 17 feet of emergency egress coverage.

5.3 Kuedza

A test switch is located on the bottom of the exit sign. Press and hold the test switch to simulate a power outage. The unit should switch to battery power, and the exit sign and emergency lights should illuminate. Release the switch to return to normal operation. Regular testing is recommended to ensure proper functionality.

6. Kuchengeta

  • Bhatiri: The nickel-cadmium battery is designed for no maintenance. However, it is recommended to perform monthly 30-second functional tests and annual 90-minute discharge tests to ensure the battery holds a charge and the unit operates correctly during an emergency.
  • Kuchenesa: Geza kunze kweyuniti nekanyoro, damp jira. Usashandise abrasive cleaners kana solvents.
  • Kuongorora: Periodically inspect the unit for any physical damage or discoloration.

7. Kugadzirisa matambudziko

Tarisa kutafura iri pasi apa kune zvinowanzoitika uye mhinduro dzadzo.

DambudzikoZvinogona KukonzeraSolution
Exit sign or emergency lights do not illuminate during power outage.Battery not charged or faulty; unit not connected to AC power.Ensure AC power is connected and indicator light is on. Allow 24 hours for initial battery charge. If problem persists, battery may need replacement.
Chiedza chemagetsi chakadzimwa.No AC power; faulty wiring; indicator light malfunction.Check circuit breaker. Verify wiring connections. Contact a qualified electrician if necessary.
Emergency lights do not stay on for 90 minutes during test.Battery simba radzikiswa.Perform a full 90-minute discharge test and recharge. If run time is still insufficient, the battery may need replacement.

8. Zvinotsanangurwa

Key technical details for the Sure-Lites All-Pro APC7RG unit:

Diagram showing the dimensions of the Sure-Lites All-Pro APC7RG exit sign: 16.57 inches (421mm) length, 2.32 inches (59mm) width, 8.26 inches (210mm) height. Also indicates damp location rating, operating temperature range, selectable faces, UL certification, and T20 compliance.

Image 8.1: Product dimensions and certifications.

FeatureDetail
BrandSure-Lites
Model NameAPC7RG Case Pack
Chikamu NhambaAPC7RG
MaterialHigh-impact, UV resistant thermoplastic (Polycarbonate)
ColorWhite finish, Red/Green selectable light
Zviyero zveChigadzirwa (L x W x H)16.57" x 2.32" x 8.26"
Chiedza Chinyorwa TypeLED
Nhamba Yechiedza Sources2 (emergency heads)
Wattage2.01 watts
Kupenya156 lumens
Voltage120 Volts
Simba SourceCorded Electric
Bhatiri TypeNickel Cadmium (NiCAD)
Average Battery Life (Emergency Run Time)90 kwemaminitsi
Egress CoverageKusvika ku17 tsoka
Installation TypeFlush Mount (Universal J-box)
CertificationsUL 924, NEC, NFPA101, NFPA70, CEC Title 20 compliant, Damp Nzvimbo Yakanyorwa
Item Weight21.4 mapaundi (emapaketi gumi nemaviri)

9. Warranty uye Tsigiro

9.1 Ruzivo rweWaranti

The Sure-Lites All-Pro APC7RG unit comes with a 5-year limited warranty. The NiCad battery carries a seven-year pro-rated warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.

9.2 Mutengi Tsigiro

For technical assistance, replacement parts, or warranty claims, please contact Sure-Lites customer support. Contact information can typically be found on the manufacturer's websaiti kana pane chigadzirwa kurongedza.

Related Documents - APC7RG

Preview Sure-Lites EBPLEDL6SF Emergency LED Driver - Product Specifications and Data
Detailed specifications, features, and installation data for the Sure-Lites EBPLEDL6SF Emergency LED Driver by Cooper Lighting Solutions. Includes product overview, technical data, certifications, and dimensional drawings.
Preview Sure-Lites EBP1400NCX/NCF Emergency Ballast Installation Manual
Comprehensive installation, operation, and maintenance guide for Sure-Lites EBP1400NCX and EBP1400NCF emergency ballasts, detailing safety precautions, wiring diagrams, and lamp kugarisana.
Preview Sure-Lites ELX Series LED Exit Sign - Technical Specifications
Detailed technical specifications for the Sure-Lites ELX Series self-powered LED exit signs, including features, construction, code compliance, energy data, and mounting options.
Preview Sure-Lites FirstLink Connected Emergency Lighting System | Cooper Lighting Solutions
Explore the Sure-Lites FirstLink connected emergency lighting system from Cooper Lighting Solutions. This brochure details system features, hardware, app control, and service plans designed for building safety and code compliance.
Preview Sure-Lites All-Pro APX RG Series LED Exit Sign - Technical Specifications
Detailed specifications for the Sure-Lites All-Pro APX RG Series LED Exit Sign, featuring thermoplastic housing, selectable red or green faces, AC-only or battery backup options, and compliance with UL924 and California Title 20.
Preview Sure-Lites APEL Series Emergency Lighting Fixture
Ongorora iyo Sure-Lites APEL Series mwenje wechimbichimbi, ine UL 924 runyorwa, 90-maminetsi ekumhanya, inogadzirika LED misoro, uye yakasimba nickel cadmium bhatiri. Yakanakira yakavimbika emergency egress ine kure kure kugona sarudzo.