1. Chigadzirwa Pamusoroview
The Mesqool Vibrating Alarm Clock (Model CR1027) is a portable device designed to assist with waking up through customizable alarm modes, including vibration, buzzer, or both. It features a rechargeable battery, dual alarm settings, and adjustable vibration intensity. This manual provides comprehensive instructions for its use.
Mufananidzo 1: Mberi view of the Mesqool Vibrating Alarm Clock, displaying the digital time, AM/PM indicator, alarm icons, and battery status.
2. Package Zviri mukati
Ndokumbira utarise kuti zvinhu zvese zvirimo mupasuru yako:
- Mesqool Vibrating Alarm Clock (CR1027)
- USB Kuchaja Cable
- Mushandisi Chinyorwa (gwaro iri)
3. Device Layout
Familiarize yourself with the buttons and ports on your alarm clock for proper operation.
Mufananidzo 2: Side view of the alarm clock, indicating the location of control buttons and the charging port. Specific button functions are detailed in the operating instructions.
4. Setup
4.1 Kutanga Kuchaja
Before using the alarm clock for the first time, ensure it is fully charged. Connect the provided USB charging cable to the clock's charging port and then to a compatible USB power adapter (not included). The battery indicator on the display will show the charging status.
Mufananidzo 3: The alarm clock connected to a charging cable, illustrating the charging process.
4.2 Simba On/Kudzima
To power the device on or off, press and hold the Power button (located on the side, refer to Figure 2) for approximately 3 seconds.
5. Operating Instructions
5.1 Kuisa Nguva
- Press the Nguva Yakarongwa button once. The hour digits will begin to flash.
- Shandisa iyo + uye - mabhatani ekugadzirisa awa.
- Press Nguva Yakarongwa zvakare. Maminiti madiki achapenya.
- Shandisa iyo + uye - mabhatani ekugadzirisa maminetsi.
- Press Nguva Yakarongwa a third time to confirm the time and exit the setting mode.
5.2 Setting Alarms (Alarm 1 and Alarm 2)
The alarm clock supports two independent alarms. The procedure for setting each alarm is identical.
- Press the Alamu 1 or Alamu 2 button once. The alarm time will flash.
- Shandisa iyo + uye - mabhatani ekugadzirisa nguva yealamu yaunoda.
- Dzvanya pane zvinotevera Alarm button again. The alarm minutes will flash.
- Shandisa iyo + uye - mabhatani ekugadzirisa maminitsi ealarm aunoda.
- Dzvanya pane zvinotevera Alarm button a third time to confirm the alarm time.
- Pakarepo mushure mekuseta nguva, tinya iyo Alarm button repeatedly to cycle through the available alarm modes: Vibration chete, Buzzer Chete,uye Vibration + BuzzerChiratidzo chinoenderana nacho chichaonekwa pachiratidziro.
- To activate or deactivate an alarm, press the respective Alarm button until the alarm icon appears (activated) or disappears (deactivated).
Mufananidzo 4: Display showing the three alarm modes: Vibration (VIB), Vibration + Buzzer (VIB+BUZZ), and Buzzer (BUZZ).
5.3 Zivai Rinoshanda
When an alarm is active, press the large Snooze/Chiedza button (typically on the top or front, refer to Figure 2) to temporarily silence the alarm for approximately 9 minutes. The alarm will reactivate after this period.
5.4 Kumisa Alarm
To stop an active alarm, press any button other than the Snooze/Chiedza button. The alarm will then reset for the next scheduled activation.
5.5 Adjusting Vibration Intensity
The alarm clock offers three levels of vibration intensity: Low, Middle, and High.
- While the alarm is not active, press the Vibration button (refer to Figure 2).
- Each press will cycle through the intensity levels. The display may indicate the current level.
Mufananidzo 5: Illustration of the three vibration intensity levels: Low, Middle, and High.
5.6 Ratidza Kupenya
Press the Chiedza button (often combined with Snooze, refer to Figure 2) to cycle through different display brightness levels.
6. Kuchengeta
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Usaise mudziyo panzvimbo inopisa zvakanyanya, pachiedza chezuva chakananga, kana pahunyoro hwakawandisa.
- Ensure the charging port remains free of dust and debris to maintain proper connection.
- When storing the device for extended periods, keep it in a cool, dry environment.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Clock does not turn on. | Bhatiri rapera. | Connect the device to a power source using the USB cable and allow it to charge fully. |
| Alarm hainzwi kana kudedera. | Alarm haina kuvhurwa kana kuiswa zvisizvo. | Verify that the alarm time is set correctly and the desired alarm mode (Vibration, Buzzer, or both) is selected and activated (alarm icon visible on display). |
| Chiratidziro chakaderera kana kuti hachiverengeki. | Mwero wekupenya wakaderera zvakanyanya. | Press the Chiedza button to increase the display brightness. |
| Mabhatani haapindure. | Temporary software glitch. | Try restarting the device by holding the Power button for 3 seconds. If the issue persists, allow the battery to fully deplete and then recharge. |
8. Zvinotsanangurwa
- Muenzaniso: CR1027
- Brand: Mesqool
- Ratidza Rudzi: LED
- Kunobva Simba: Battery Powered (Rechargeable)
- Battery Capacity: 3000mAh
- Zviyero zvechigadzirwa: Approximately 3.35"W x 3.35"H x 1.06"D
- Chinhu Weight: 7.4 ounces
- Special Features: Adjustable Volume, Dual Alarms, Snooze Function, Vibration Alarm
9. Warranty uye Tsigiro
Mesqool products are manufactured to high standards. For warranty information, technical assistance, or customer support, please refer to the contact details provided on the product packaging or visit the official Mesqool website. Please retain your purchase receipt as proof of purchase for warranty claims.
Mufananidzo 6: Product packaging, which typically includes manufacturer details and support contact information such as email (e.g., support-eu@mesqool.com) and website (e.g., http://www.mesqool.com).
