1. Nhanganyaya
This manual provides detailed instructions for the safe and correct installation and use of the Meliconi Slimstyle Plus 400 S Fixed Wall TV Mount. This mount is designed for televisions ranging from 40 to 82 inches, supporting VESA patterns 200x200, 300x300, and 400x400. It is suitable for installation on both solid walls and plasterboard walls (with specific weight limitations). Please read all instructions carefully before beginning installation.
2. Safety Information
- Verenga mirairo yese: Ensure you understand all installation steps and safety warnings before proceeding.
- Weight Capacity: Do not exceed the maximum load capacity of 50 kg (110 lbs) for solid walls or 35 kg (77 lbs) for plasterboard walls.
- Kukura kweTV: This mount is compatible with TVs from 40 to 82 inches.
- VESA Kuenderana: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) matches 200x200, 300x300, or 400x400 mm.
- Rudzi rweMadziro: Ensure the wall structure can safely support the combined weight of the mount and your television. If unsure, consult a qualified professional.
- Zvishandiso: Shandisa maturusi akakodzera uye pfeka giya rekuchengetedza panguva yekuisa.
- Vana: Chengetedza vana kure nenzvimbo yekuisa.
3. Package Zviri mukati
Carefully unpack the box and ensure all components are present and undamaged. Refer to the image below for typical package contents.
Image 3.1: Meliconi Slimstyle Plus 400 S packaging. The package typically includes the wall plate, TV brackets, mounting hardware (screws, anchors, washers), and an instruction manual.
Zviri mukati zvinosanganisira:
- Wall Plate (main mount component)
- TV Brackets (attach to the back of the TV)
- Mounting Hardware (screws, wall anchors, washers, spacers)
- Bhuku reMirayiridzo
4. Chigadzirwa Pamusoroview uye Kukura
The Meliconi Slimstyle Plus 400 S is a fixed wall mount designed for a sleek, low-profile installation. The mount features the Fast Block locking system for secure TV attachment and EVA foam protectors to safeguard your TV.
Image 4.1: The Meliconi Slimstyle Plus 400 S fixed wall TV mount.
Refer to the technical drawing below for detailed dimensions:
Image 4.2: Technical drawing showing the dimensions of the Meliconi Slimstyle Plus 400 S mount. Maximum width is approximately 40 cm (15.7 inches) and maximum height is approximately 40 cm (15.7 inches) for the TV mounting arms. The mount depth is very slim, approximately 1.5 cm (0.6 inches) without spacers and 3 cm (1.2 inches) with included spacers.
5. Kuisa Nongedzo
5.1. Usati Watanga
- Tarisa Kuenderana kweTV: Confirm your TV's size (40-82 inches) and VESA pattern (200x200, 300x300, or 400x400 mm).
- Determine Wall Type: Identify if your wall is solid (concrete, brick) or plasterboard. This affects the type of anchors and drilling required.
- Locate Studs (for plasterboard): For plasterboard walls, it is crucial to mount the bracket to a vertical wooden or metal stud for maximum security.
- Clearance: Ensure there are no electrical wires, water pipes, or other obstructions in the drilling area.
5.2. Zvishandiso Zvinodiwa
- Penzura
- Kuyera Tape
- Level
- Drill
- Drill Bits (appropriate for wall type and anchor size)
- Screwdriver (Phillips musoro)
- Stud Finder (for plasterboard walls)
5.3. Nhanho-ne-Nhanho Kuisa
- Batanidza Mabhureki eTV paTV:
- Isa TV yako pasi zvinyoro nyoro panzvimbo yakachena uye yakapfava.
- Align the TV brackets with the VESA mounting holes on the back of your TV.
- Select the correct screws and washers from the provided hardware kit that fit your TV's mounting holes. Use spacers if necessary to ensure the brackets are flush and cables are not pinched.
- Securely fasten the TV brackets to the TV. Do not overtighten.
- Mark Wall Drilling Positions:
- Determine the desired height for the top of your TV.
- Hold the wall plate against the wall at the desired position. Use a level to ensure it is perfectly horizontal.
- Mark the drilling points through the holes on the wall plate with a pencil.
- Drill Holes:
- Using the appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill holes at the marked positions.
- For solid walls, insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if needed until flush with the wall surface.
- For plasterboard walls, ensure you are drilling into a vertical stud. Use appropriate stud-specific anchors if not directly into a stud, but direct stud mounting is highly recommended for safety. The mount is suitable for plasterboard walls with a thickness from 12.5mm to 25mm.
- Mount Wall Plate:
- Align the wall plate with the drilled holes.
- Insert the mounting screws through the wall plate and into the anchors (for solid walls) or directly into the studs (for plasterboard).
- Tighten all screws firmly until the wall plate is securely fixed to the wall. Do not overtighten.
- Hang TV on Wall Plate:
- Nerubatsiro, simudza TV nokungwarira (nemabhuraketi akabatanidzwa) wobva wabatanidza mabhuraketi eTV pamucheto wepamusoro wepuratifomu yemadziro.
- Gently lower the TV until the brackets fully engage with the wall plate. Ensure the TV is centered and level.
- Secure TV with Fast Block System:
- Locate the Fast Block locking mechanism on the TV brackets.
- Engage the Fast Block system to securely lock the TV to the wall plate. This prevents accidental dislodgement.
- Verify that the TV is firmly attached and cannot be easily lifted off the mount.
6. Kushanda
Once installed, the Meliconi Slimstyle Plus 400 S is a fixed mount, meaning it does not offer swivel or tilt adjustments beyond any initial slight tilt. The primary operation involves securely attaching and detaching your TV.
- Attaching the TV: As described in the installation steps, hook the TV brackets onto the wall plate and engage the Fast Block locking system.
- Detaching the TV: To remove the TV, disengage the Fast Block locking system. With assistance, carefully lift the TV upwards and away from the wall plate.
7. Kuchengeta
- Kuchenesa: Geza chigadziko nejira rakapfava, rakaoma. Dzivisa zvinochenesa zvinogumbura kana zvinonyungudutsa.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Do not overtighten.
- Kukuvadza: If any part of the mount appears damaged, do not use it. Contact customer support for assistance.
8. Kugadzirisa matambudziko
- TV haina mwero: Ensure the wall plate was installed perfectly level. If not, you may need to adjust the wall plate's position.
- Gomo rinonzwa rakasununguka: Re-check all mounting screws on both the wall plate and the TV brackets. Ensure they are securely tightened. Verify the Fast Block system is engaged. If the wall anchors are loose, professional assistance may be required.
- TV does not fit: Double-check your TV's VESA pattern and weight against the mount's specifications. Ensure you are using the correct screws and spacers.
9. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Model Number | 480957 |
| Inoenderana TV Saizi | 40" kusvika 82" |
| VESA kuenderana | 200x200, 300x300, 400x400 mm |
| Maximum Load Capacity (Solid Wall) | 50 kg (110 lbs) |
| Maximum Load Capacity (Plasterboard Wall) | 35 kg (77 lbs) |
| Mounting Type | Yakagadziriswa Wall Mount |
| Movement Type | Fixed |
| Maximum Tilt Angle | 12 Degrees (slight downward tilt) |
| Material | Metal |
| Color | Nhema |
| Product Dimensions | 0.91 x 18.03 x 4.69 inches (approximate, mount only) |
| Item Weight | 3.74 makirogiramu |
10. Warranty uye Tsigiro
The Meliconi Slimstyle Plus 400 S TV mount is 100% Made in Italy and certified by TÜV SÜD, ensuring high quality and reliability. For specific warranty details, please refer to the documentation included with your purchase or visit the official Meliconi website.
For technical support, missing parts, or any questions regarding the installation or operation of your Meliconi TV mount, please contact Meliconi customer service through their official websaiti kana ruzivo rwekusangana rwunopihwa mune yako chigadzirwa kurongedza.
