Nhanganyaya
The Edifier M60 Multimedia Speaker system offers a premium audio experience with its compact design and powerful output. Engineered for desktop environments, these speakers deliver Hi-Res Audio through both wired and wireless connections, including Bluetooth 5.3 with LDAC support. This manual provides comprehensive instructions for setting up, operating, and maintaining your M60 speakers to ensure optimal performance.
Figure 1: Edifier M60 Multimedia Speakers (White)
Key Features
- Compact and Delicate Design: Each speaker measures 100mm (W) x 168mm (H) x 147 mm (D), designed to fit seamlessly into any desktop setup.
- Simba Rinobuda: Total 66W RMS power (18W+18W mid-low, 15W+15W treble) with 1" silk dome tweeters and 3" long-throw aluminum diaphragm mid-low drivers. Features a high-efficiency closed-loop Class-D audio amplifier.
- High-Quality Audio Processing: Full digital processing, Class-D amplification, and Hi-Res Audio certification for both wired and wireless transmission. Includes precise two-way active crossover and dynamic range control via a built-in DSP.
- Zvakawanda Zvinopinza: Versatile connectivity options including Bluetooth V5.3 for wireless streaming, USB-C, and AUX inputs for wired connections.
- Bluetooth 5.3 Kubatana: The Bluetooth V5.3 audio receiver supports the LDAC codec, allowing high-resolution audio streaming up to 24-bit/96kHz from compatible Android devices.
- Kudzora-Kune Mushandisi: Features a cap-sensitive touch panel with an automatic backlight that activates upon hand approach. Extended functions are available via the EDIFIER ConneX mobile app.
- Aluminum Speaker Stands Bundled: Includes a pair of aluminum speaker stands designed at a 15-degree angle to reduce sound distortion by directing audio directly to ear level.
Figure 2: Compact Design of Edifier M60 Speakers on a Desktop
Figure 3: Internal Components of the M60 Speaker
Figure 4: High-Resolution Audio Processing
Figure 5: Connectivity Ports (AUX, USB-C, Bluetooth)
Figure 6: Touch Controls on Top Panel
Figure 7: EDIFIER ConneX Mobile App Interface
Figure 8: Speaker on Aluminum Stand
Setup Guide
1. Kuburitsa uye Zviri Mukati
Bvisa zvese zviri mupakeji nokungwarira. Bhokisi rinofanira kunge riine:
- Edifier M60 Multimedia Speakers (Left and Right)
- Aluminum Speaker Stands (2)
- Power Cable
- USB-C kuenda ku USB-C Cable
- 3.5mm AUX Cable
- Speaker Connection Cable (4-pin)
- Mushandisi Chinyorwa (gwaro iri)
2. Kuiswa kweMutauriri
Place the speakers on a stable, flat surface, ideally at ear level when seated. The included aluminum stands are designed to angle the speakers upwards by 15 degrees, optimizing sound projection for desktop use. Ensure there is adequate space behind the speakers for cable connections and proper ventilation.
Figure 9: Speaker Dimensions for Optimal Placement
3. Kubatanidza Vatauri
- Connect the left and right speakers using the provided 4-pin speaker connection cable. This cable connects the active (right) speaker to the passive (left) speaker.
- Connect the power cable to the active speaker and then to a power outlet.
- Choose your preferred audio input:
- USB-C: Connect the USB-C cable from your computer to the USB-C input on the active speaker. This utilizes the speaker's built-in DAC for high-quality digital audio.
- AUX: Connect the 3.5mm AUX cable from your audio source (e.g., smartphone, tablet, turntable) to the AUX input on the active speaker.
- Bluetooth: For wireless connection, ensure no wired inputs are active. The speaker will automatically enter Bluetooth pairing mode when no wired source is detected.
Video 1: Edifier M60 Bluetooth Speaker Overview and Setup. This video demonstrates the physical connections and initial setup of the Edifier M60 speakers, including power and audio input options.
Operating Instruction
1. Simba On / Off
To power on or off the speakers, press and hold the power icon on the cap-sensitive touch panel located on top of the active (right) speaker for a few seconds.
2. Input Selection
Tap the power icon on the touch panel to cycle through the available input sources: Bluetooth (blue LED), USB-C (green LED), and AUX (red LED). The LED indicator will change color to reflect the active input.
3. Volume Control
Adjust the volume by swiping your finger across the touch panel. The backlight will illuminate to show the volume level and then dim automatically.
4. Bluetooth Kubatanidza
When Bluetooth input is selected and no device is connected, the speaker will automatically enter pairing mode (blue LED blinking). On your device, search for "EDIFIER M60" in the Bluetooth settings and select it to pair. Once connected, the blue LED will remain solid.
5. EDIFIER ConneX App
Download the EDIFIER ConneX mobile app from your device's app store for enhanced control and customization options, including sound effects and backlight settings.
Maintenance
To ensure the longevity and optimal performance of your Edifier M60 speakers, follow these maintenance guidelines:
- Kuchenesa: Use a soft, dry cloth to wipe the speaker surfaces. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish.
- Dust Protection: Keep the speakers free from dust accumulation. You may use a soft brush or a vacuum cleaner with a brush attachment for grilles and crevices.
- Environment: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure proper ventilation around the speakers.
- Kubata: Handle the speakers with care. Avoid dropping them or subjecting them to strong impacts.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Hapana ruzha kubva kune vatauri. |
|
|
| Bluetooth nyaya dzekubatanidza. |
|
|
| Speakers do not automatically switch input sources. | This is expected behavior; manual input selection is required. | Manually select the desired input source by tapping the touch panel. |
| Power plug feels loose. | Design of the power connector. | Ensure the power plug is fully inserted. While it may not have a tight "click" fit, it should make proper electrical contact. Avoid unnecessary movement of the speaker once connected. |
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Name | M60 |
| Mutauri Rudzi | Booksherufu |
| Mutauri Mukuru Wekubuda Simba | 66 Watt RMS |
| Kubatana Technology | Bluetooth, USB-C, AUX |
| Bluetooth Version | V5.3 (supports LDAC) |
| Zviyero zveChigadzirwa (pamutauri wega wega) | 3.93"D x 6.61"W x 5.78"H (100mm x 168mm x 147mm) |
| Item Weight | 6.75 pounds (3.07 Makirogiramu) |
| Sravana Sameeralu Serial 4th Tweeter Diameter | 1 inch |
| Mid-low Driver Size | 3 inches |
| Chiratidzo-ku-Ruzha Ratio | 85 dB |
| Kudzora Nzira | Touchpad |
| Inosanganisirwa Zvikamu | Aluminum Speaker Stands |
| Mugadziri | Edifier |
Warranty uye Support
Edifier products are designed and manufactured to the highest quality standards. For warranty information specific to your region and product, please refer to the warranty card included with your purchase or visit the official Edifier webwebhusaiti. Kuti uwane rutsigiro rwehunyanzvi, rubatsiro rwekugadzirisa matambudziko, kana mibvunzo yebasa, ndapota taura nerutsigiro rwevatengi veEdifier kuburikidza nenzira dzavo dzepamutemo.
Unogona kuwana rumwe ruzivo uye zviwanikwa zvekutsigira pa Chitoro cheEdifier paAmazon.
