1. Nhanganyaya
Thank you for choosing the Claiks Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new adjustable height desk. Please read these instructions carefully before use and retain them for future reference.
2. Mirayiridzo Yekuchengetedza
- Ita shuwa kuti zvikamu zvese zviripo uye hazvina kukuvara pamberi pegungano.
- Chengeta vana nezvipfuyo kure nedhesiki panguva yekuvhiyiwa kudzivirira kukuvara.
- Do not overload the desk. Refer to the specifications section for maximum weight capacity.
- Dzivisa kuisa mvura zvakananga pa control panel kana pedyo nezvinhu zvemagetsi.
- Ita shuwa kuti tambo yemagetsi haina kupinwa kana kukuvadzwa.
- If any unusual noise, smell, or malfunction occurs, immediately unplug the desk and contact customer support.
- Assembly may require two people due to the weight of some components.
3. Package Zviri mukati
Please verify that all the following parts are included in your package:
- Desk tabletop (black, 120cm x 60cm)
- Desk frame (black)
- Lifting columns (2 units)
- Control panel with memory presets
- Power adapter uye tambo
- Zvishandiso zvekugadzira (zvikushi, mabhaudhi, chipanera cheAllen)
- Chinyorwa chemirayiridzo
Note: A screwdriver (not included) is recommended for assembly, although pre-drilled holes may allow for use with a regular screwdriver.
4. Setup uye Gungano
Follow these steps for assembling your Claiks Electric Standing Desk. Clear instructions are provided in the included manual.
Image: A screwdriver and the instruction manual, illustrating the assembly process.
- Unpack Components: Nyatsobvisa zvikamu zvese kubva pakurongedzerwa uye wozviisa panzvimbo yakachena, yakapfava kudzivirira makwara.
- Assemble Frame: Attach the lifting columns to the desk feet using the provided hardware.
- Attach Crossbar: Connect the crossbar between the two lifting columns.
- Bhokisi Rekudzora Rakaiswa: Secure the control box to the designated area on the frame.
- Batanidza pamusoro petafura: Carefully place the tabletop onto the assembled frame. Align the pre-drilled holes and secure the tabletop with the screws.
- Batanidza Panera Yekudzora: Attach the control panel to the underside of the desk and connect its cable to the control box.
- Batanidza Simba: Batanidza adapta yemagetsi mubhokisi rekudzora wobva waisa mugomba rekuburitsa magetsi pamadziro.
Image: A visual guide depicting the step-by-step assembly process of the desk frame and tabletop.
5. Operating Instructions
Your Claiks Electric Standing Desk offers smooth and quiet height adjustment with memory presets.
Mufananidzo: Kuvhara view of the desk's control panel, showing the digital height display and buttons for up, down, and memory presets (1, 2, 3).
5.1. Kugadzirisa Urefu
- Shandisa iyo kumusoro (▲) uye Pasi (▼) buttons on the control panel to manually adjust the desk height. The current height will be displayed on the digital screen.
- The desk can be adjusted between 72cm and 118cm.
5.2. Zvigadziriso zveMemory
The desk allows you to save up to three preferred heights for quick adjustment.
- Gadzirisa dhesiki kune yako yaunoda kureba uchishandisa Up / Down mabhatani.
- Press the "M" button (or similar memory button) followed by one of the numbered preset buttons (1, 2, kana 3). The display will confirm the height has been saved.
- To recall a saved height, simply press the corresponding numbered preset button (1, 2, kana 3). The desk will automatically move to that height.
Image: A person's hand interacting with the desk's control panel, adjusting the height. The digital display shows '072'.
5.3. Kushanda kwakanyarara
The Claiks Electric Standing Desk is designed for quiet operation, ensuring minimal disturbance in your workspace.
Image: A graphic representation showing the desk's noise level at approximately 45dB, significantly lower than typical office noise (60dB).
6. Kuchengeta
Kugadziriswa kwakakodzera kunovimbisa kugara kwenguva refu uye kushanda zvakanaka kwedhesiki rako.
- Kuchenesa Tafura Yepamusoro: The tabletop is made with melamine resin, which is resistant to water, heat, and dirt. Clean with a soft, damp jira uye nyoro detergent. Dzivisa abrasive cleaners.
- Kugadzirisa Frame: Nguva nenguva tarisa ese screws nemabhaudhi kuti ave nechokwadi kuti akasimba. Simbisazve kana zvichidiwa.
- Magetsi Zvikamu: Keep the control panel and power adapter dry and free from dust. Do not attempt to open or repair electrical components yourself.
7. Kugadzirisa matambudziko
If you encounter any issues with your Claiks Electric Standing Desk, please refer to the following common solutions:
- Desk Kwete Kufamba: Ensure the power cable is securely plugged into both the desk and the wall outlet. Check if the outlet is functional.
- Uneven Movement: Unplug the desk for 30 seconds, then plug it back in. This may reset the system. If the issue persists, ensure the desk is on a level surface and that no objects are obstructing the lifting columns.
- Kodhi yekukanganisa paChiratidziro: Note down any error codes displayed and refer to the full troubleshooting guide (if available) or contact customer support.
- Noise Panguva Yekushanda: A slight hum is normal. If you hear loud or unusual noises, stop operation and inspect the desk for any loose parts or obstructions.
If these steps do not resolve the issue, please contact Claiks customer support for further assistance.
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Claiks |
| Model | Electric Standing Desk |
| Zviyero (W x D x H) | 120 masendimita x 60 masendimita x 72-118 masendimita |
| Height Adjustment Range | 72 kusvika 118 cm |
| Kusimudza Speed | 20 mm/s |
| Color | Black (Frame and Tabletop) |
| Tabletop Material | Melamine Resin |
| Memory Presets | 3 programmable heights |
| Gungano Rinodiwa | Ehe |
| Package Dimensions | 125 x 33 x 16 cm |
| Package Weight | 20 kg |
Image: A diagram illustrating the dimensions of the Claiks Electric Standing Desk, including its width (120cm), depth (60.9cm), and adjustable height range (72cm to 118cm).
9. Warranty uye Tsigiro
Claiks is committed to providing high-quality products and excellent customer service.
- Warranty yemugadziri: All Claiks products come with a 1-year mugadziri waranti. During this period, free repair or replacement services are provided for any manufacturing defects.
- Tsigiro yeVatengi: Our customer support team is available to assist you with any questions or issues. We offer support in multiple languages, including English and Japanese. Please feel free to contact us at any time.
For warranty claims or support inquiries, please refer to the contact information provided on your purchase receipt or the official Claiks website.
