HARDELL Engraving Pen DKB22501BLAHD-1 Instruction Manual

1. Nhanganyaya

Thank you for choosing the HARDELL Engraving Pen. This versatile, cordless electric engraving tool is designed for precision work on various materials, offering six adjustable speeds and a long-lasting rechargeable battery. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Safety Information

• Always wear appropriate personal protective equipment, such as safety glasses, when operating the engraving pen.
• Ensure the workpiece is securely fastened to prevent movement during engraving.
• Keep fingers and loose clothing away from rotating bits.
• Do not operate the tool near flammable liquids or gases.
• Chengetedza mudziyo nemidziyo munzvimbo yakaoma, yakachengeteka, isingasviki nevana.
• Disconnect the tool from power before changing accessories or performing maintenance.

3. Package Zviri mukati

The HARDELL Engraving Pen Kit includes the following items:

• HARDELL Engraving Pen (1)
• USB-C Kuchaja Cable (1)
• Diamond Bits (6)
• Polishing Bits (3)
• Sanding Paper & Rod (20 pieces)
• Replacement Screws (4)
• Chipanera chakaita L (1)
• Spanner (1)
• Carving Templates / Stencils (4)
• Kurumidza Kutanga Gwara (1)

4. Setup

4.1. Kubhadhara Battery

The engraving pen is powered by a 2000mAh Lithium Ion battery. Before first use, or when the battery is low, charge the device using the provided USB-C cable.

1. Connect the USB-C cable to the charging port on the engraving pen.
2. Plug the other end of the USB-C cable into a standard USB charger, laptop, or power bank.
3. The charging indicator will show the charging status. A full charge typically takes approximately 2 hours for continuous engraving.

4.2. Bit Installation

To install or change an engraving bit:

1. Ensure the engraving pen is turned off.
2. Unscrew the front collar of the pen to expose the chuck.
3. Insert the desired bit into the chuck.
4. Use the provided L-shaped wrench to securely tighten the chuck, ensuring the bit is firmly in place. Do not overtighten.
5. Replace the front collar.

5. Operating Instructions

5.1. Kudzima/Kubatidza uye Kugadzirisa Kumhanya

The HARDELL Engraving Pen features 6-speed settings for various tasks.

1. To power on, press and hold the power button until the LCD display illuminates.
2. To adjust the speed, press the power button repeatedly to cycle through the 6 available speeds (18,000 to 38,000 RPM). The LCD display will indicate the current speed level.
3. Kuti udzime, baya uye ubate bhatani remagetsi kusvika chiratidziro chadzima.

5.2. Material Compatibility and Usage

This tool is suitable for engraving, grinding, and polishing on a wide range of materials:

• Engraving: Use diamond bits for detailed work on metal, wood, glass, plastic, and leather.
• Kukuya: Utilize grinding bits for shaping and material removal.
• Kupenya: Attach polishing bits for smoothing surfaces and achieving a desired finish.
• Kuchera: Small drilling tasks can be performed on softer materials like shells or plastic.

5.3. Using Stencils

The kit includes various stencils (alphabets, numbers, designs) to assist with precise engraving:

1. Place the desired stencil firmly on the material surface.
2. Carefully trace the stencil design with the engraving pen, applying light and consistent pressure.
3. Remove the stencil once the design is complete.

5.4. Chigadzirwa Chiratidziro Vhidhiyo

Watch this video for a demonstration of the HARDELL Engraving Pen in action, showcasing maficha ayo uye mashandisirwo akasiyana-siyana.

6. Kuchengeta

6.1. Kuchenesa

Regular cleaning ensures the longevity and performance of your engraving pen:

• After each use, gently wipe the pen body with a soft, dry cloth.
• Use a small brush to remove any dust or debris from the chuck and bit area.
• Usashandise makemikari akaomarara kana ekuchenesa hasha.

6.2. Bit Replacement

Bits will wear down over time. Replace worn bits promptly to maintain engraving quality. Follow the bit installation steps (Section 4.2) to replace old bits with new ones.

7. Kugadzirisa matambudziko

• Chishandiso chisiri kubatidza: Ensure the battery is fully charged. If the issue persists, check if the battery is correctly inserted.
• Bit not rotating or rotating slowly: Verify the bit is securely tightened in the chuck. Check the battery level and recharge if necessary. Adjust the speed setting to a higher RPM.
• Excessive heat during operation: Prolonged use at high speeds can cause the tool to warm up. Allow the tool to cool down periodically. Ensure proper ventilation.
• Poor engraving quality: Ensure the bit is sharp and not worn. Adjust the speed setting and pressure according to the material.

8. Zvinotsanangurwa

9. Warranty & Tsigiro

The HARDELL Engraving Pen comes with a 1-Year Manufacturer's Warranty. For warranty claims, technical support, or any questions regarding your product, please contact HARDELL customer service through the retailer where you purchased the product or visit the official HARDELL website.