Bhuku rekushandisa reACEZUK 5000A Portable Jump Starter

Nhanganyaya

Thank you for choosing the ACEZUK 5000A Portable Jump Starter. This device is designed to provide a reliable and powerful solution for starting dead vehicle batteries, as well as serving as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Safety Information

Gara uchicherechedza zvinotevera kuchengetedza kudzivirira kukuvara kana kukuvara kwechigadzirwa nemotokari:

• Ensure the jump starter is fully charged before use, especially for jump-starting.
• Usaedze kusvetuka tanga bhatiri rakaomeswa nechando.
• Batanidza clamps correctly: Red to positive (+), Black to negative (-). Reverse polarity can cause damage.
• Usabvumira tsvuku uye dema clamps kubata mumwe nemumwe kana yabatanidzwa kune yekusvetuka inotanga.
• Bvisa clamps from the vehicle battery immediately after the vehicle starts.
• Chengetedza mudziyo kure nevana.
• Chengetedza munzvimbo inotonhorera, yakaoma kure nechiedza chezuva uye tembiricha yakakwirira.
• This device features 8 smart protections including over temperature, over charge, over discharge, over current, over voltage, short circuit, reverse polarity, and anti-interference protection. However, always follow proper connection procedures.

Figure 1: Illustration of the 8 smart clamp protections for enhanced safety.

Chii Inosanganisirwa

Your ACEZUK 5000A Portable Jump Starter package includes:

• 1 x ACEZUK Portable Jump Starter
• 1 x Smart Jumper Cables with 12V Display Clip
• 1 x USB-C Yekuchaja Cable
• 1 x Chinyorwa cheMushandisi (gwaro iri)
• 1 x Storage Box/Portable Carry Case

Figure 2: Contents of the ACEZUK Jump Starter package.

Product Features

• Kusvetuka Kwakasimba Kutanga: Delivers 5000A peak current, capable of starting 12V vehicles with up to 10.0L gas or 8.0L diesel engines. Operates effectively in extreme temperatures (-4°F to 140°F).
• Visible LED Display: A large, clear display shows battery percentage and operational status, eliminating guesswork.
• Portable Power Bank: Equipped with multiple USB output ports (USB-Out 1: 5V-3A, 9V-2A, 12V-1.5A; USB-Out 2: 5V-2.4A) and a USB-C input (5V-2A, 9V-2A, 12V-1.5A) for charging various electronic devices.
• Multi-mode LED Emergency Torch: Features a bright LED light with Flashlight, Strobe, SOS, and Warning light modes for various emergency situations.
• Advanced Protection Technology: Incorporates 8 smart protections: reverse polarity, reverse connection, over current, over voltage, overload, over-charge, over-discharge, and short circuit protection. The smart clamps are constructed with all-metal for durability.

Figure 3: 5000A Peak Current capability for different vehicle types.

Figure 4: Clear 2-inch LCD display for easy monitoring.

Figure 5: The jump starter functioning as a portable power bank.

Figure 6: The versatile 400 Lumen LED light modes.

Gadzirira

Kuchaja iyo Jump Starter

Before first use, fully charge the jump starter. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C IN port on the jump starter.
2. Batanidza rimwe divi retambo yeUSB-C kune adapta yemadziro yeUSB inoenderana nayo (haisipo).
3. The LED display will show the charging progress. The unit is fully charged when the display shows 100%.

Connecting the Smart Jumper Cables

The smart jumper cables connect to the dedicated EC5 output port on the jump starter. Ensure a firm connection.

Figure 7: Visual guide for jump start connection steps.

Operating Instruction

Svetuka Kutanga Mota

1. Gadzirira Kutanga Kusvetuka: Ensure the jump starter has sufficient charge (at least 50% recommended).
2. Batanidza Matambo eJumper Akangwara: Insert the blue plug of the smart jumper cables into the EC5 output port on the jump starter. The display on the smart cable will light up.
3. Batanidza kuBhatiri reMotokari:
   • Batanidza iyo tsvuku (+) clamp kune yakanaka terminal yebhatiri remotokari.
   • Batanidza iyo nhema (-) clamp kune yakashata terminal yebhatiri remotokari.

   The smart cable display will show the battery voltage. If the connection is correct, the indicator light on the smart cable will turn solid green.
4. Kutanga Mota: Return to the vehicle and start the engine.
5. Bvisa Clamps: Once the vehicle starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect the blue plug from the jump starter.

Note: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

Kushandisa sePortable Power Bank

The jump starter can charge various USB-powered devices.

1. Open the rubber cover on the side of the jump starter to reveal the USB output ports.
2. Connect your device's charging cable to one of the USB-OUT ports.
3. Iyo yekusvetuka yekutanga inozotanga kuchaja mudziyo wako.

Using the LED Emergency Torch

The built-in LED light has multiple modes for different situations.

1. Press and hold the power button for 3 seconds to turn on the LED light (Bright mode).
2. Press the power button once to cycle through the modes: Bright → Strobe → SOS → Warning Light (Red/Blue flashing).
3. Press and hold the power button again for 3 seconds to turn off the LED light.

Maintenance

• Recharging: For optimal battery life, recharge the jump starter every 3-6 months, even if not in use.
• Kuchenesa: Pukuta chikwata nemucheka wakaoma, wakapfava. Usashandise makemikari ane hasha kana abrasive zvinhu.
• Kuchengeta: Store the jump starter in its provided storage case in a cool, dry place. Avoid extreme temperatures.

Kugadzirisa matambudziko

Zvinotsanangurwa

Warranty uye Support

For warranty information or technical support, please contact ACEZUK directly.

Contact Email: ACEZUK@outlook.com

Please have your model number (M02-US) and purchase details ready when contacting support.