Graphtec CE8000-60 Plus 24-inch Cutter Plotter User Manual

1. Nhanganyaya

This manual provides essential information for the safe and efficient operation of your Graphtec CE8000-60 Plus 24-inch Cutter Plotter. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

The Graphtec CE8000-60 Plus is designed for high-precision cutting of various materials, including vinyl, heat transfer film, and more. It features enhanced rigidity, wireless LAN connectivity, and the Advanced Registration Mark Sensing System (ARMS) for accurate contour cutting.

2. Safety Information

Chengeta matanho ekuchengetedza anotevera kudzivirira kukuvara nekukuvadzwa kwemidziyo:

• Always connect the plotter to a grounded power outlet.
• Do not operate the plotter in wet or damp mamiriro.
• Chengetedza maoko uye zvipfeko zvakasununguka kure nezvikamu zvinofamba panguva yekushanda.
• Use only Graphtec-approved blades and accessories.
• Unplug the power cord before performing any maintenance or cleaning.
• Ensure adequate ventilation around the plotter.
• Chengetedza pasingasvikirwi nevana.

3. Package Zviri mukati

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your vendor immediately.

Mufananidzo 3.1: Graphtec CE8000-60 Plus Cutter Plotter with various accessories, including vinyl rolls, software boxes, and tools.

• Graphtec CE8000-60 Plus 24-inch Cutter Plotter
• Machine Stand for CE8000-60
• Updated CB09UB Blade Holder
• CB09UB Blade (0.9 mm diameter, 45 degree)
• 2 Rolls Premium 651 Vinyl (Black & White, 24 inches x 20 feet each)
• Vinyl Swatch Book
• Shanduro Yekushandisa
• Wireless LAN Connection Module
• Roll Media Holder
• Tool & Accessory Holder
• Graphtec Studio 2 Design Software
• Studio CE8000 Machine Training Videos
• 5 Design Cards for Artwork (SVGs, JPGs, Monograms, Commercial Use)
• Cutting Blade Manual
• USB Chibatanidza Cable
• Cutting Master 5 Plug-in for Adobe Illustrator and CorelDraw

Mufananidzo 3.2: Detailed view of included accessories such as the blade holder, wireless LAN module, and software packages.

4. Setup

4.1 Kuunganidza Chigadziko

Follow the instructions provided with the machine stand to assemble it. Ensure all screws are tightened securely for stability.

Mufananidzo 4.1: Side view of the plotter stand, illustrating its structure and stability.

4.2 Simba rekubatanidza neData

1. Connect the power cord to the plotter and then to a grounded electrical outlet.
2. For wired connection, connect the USB cable from the plotter to your computer.
3. For wireless connection, install the Wireless LAN module and configure network settings via the plotter's control panel.

4.3 Kuisa Software

Install Graphtec Studio 2 and Cutting Master 5 on your computer. Refer to the respective software manuals for detailed installation instructions. Ensure your computer meets the minimum system requirements.

4.4 Loading Media

1. Place the roll of media onto the roll media holder.
2. Feed the media through the plotter, aligning it with the guides.
3. Engage the pressure adjustable push rollers to secure the media. The Media Set Assist Function helps in proper alignment.

Mufananidzo 4.2: The Graphtec CE8000 plotter with a roll of blue vinyl loaded and ready for cutting.

5. Operating Instructions

5.1 Control Panel Pamusoroview

The plotter features a touch screen and mechanical keys for navigation and operation. Familiarize yourself with the menu structure for various settings.

Mufananidzo 5.1: Close-up of the plotter's control panel, showing the touch screen interface and physical buttons for navigation.

5.2 Kuiswa uye Kugadziriswa kweBlade

1. Carefully insert the CB09UB blade into the blade holder.
2. Adjust the blade extension as needed for the material thickness. A general rule is to extend the blade just enough to cut through the material and slightly score the backing.
3. Insert the blade holder into the tool carriage.

5.3 Kushanda Kwekucheka Kwepakutanga

1. Design your graphic in Graphtec Studio 2 or your preferred design software using the Cutting Master 5 plug-in.
2. Send the cutting data to the plotter.
3. On the plotter's control panel, select the appropriate cutting conditions (force, speed). The CE8000-60 Plus offers 450 gf cutting force and 39 inches/second cutting speed.
4. Tanga nzira yekucheka.

Mufananidzo 5.2: The cutting head in action, precisely following registration marks for accurate contour cutting.

5.4 Using the ARMS System (Advanced Registration Mark Sensing)

The ARMS system allows for precise contour cutting of pre-printed graphics. The optical sensor detects registration marks on the media, compensating for distortions and ensuring accurate alignment between print and cut.

1. Print your design with registration marks from your design software.
2. Load the printed media into the plotter.
3. Select the ARMS function from the plotter's menu. The sensor will scan the registration marks.
4. Once marks are detected, proceed with the cutting operation.

5.5 Zvikumbiro

The Graphtec CE8000-60 Plus is suitable for a wide range of applications:

Mufananidzo 5.3: Examples of applications: Vinyl Window Signage, POP Packaging, Custom Labels, Window Tinting Film.

Mufananidzo 5.4: Further applications: Heat Transfer Apparel, Print and Cut Decals, Vinyl Decals, Paint Protection Film.

6. Kuchengeta

6.1 Kuchenesa

• Regularly clean the plotter's exterior with a soft, dry cloth.
• Use a soft brush or compressed air to remove dust and debris from the cutting area and sensor.
• Clean the grit rollers and pinch rollers to ensure proper media feeding.

6.2 Kutsiva Blade

Replace the cutting blade when you notice a decrease in cutting quality or when the blade appears dull or chipped. Refer to the Cutting Blade Manual for detailed instructions on safe blade replacement.

6.3 Firmware Updates

Periodically check the Graphtec website for integrated firmware updates. Keeping your plotter's firmware up-to-date ensures optimal performance and access to new features.

7. Kugadzirisa matambudziko

This section addresses common issues you might encounter. For more complex problems, contact Graphtec support.

• Poor Cutting Quality: Check blade extension, blade sharpness, cutting force settings, and ensure the media is loaded correctly.
• Media Feeding Problems: Verify that the pinch rollers are engaged properly and that the media is aligned straight. Clean the grit rollers if necessary.
• ARMS System Errors: Ensure registration marks are clearly printed, not smudged, and within the detectable area. Check lighting conditions.
• Matambudziko Ekubatanidza: For USB, ensure the cable is securely connected and drivers are installed. For Wireless LAN, verify network settings and signal strength.
• Plotter Not Responding: Power cycle the plotter and your computer. Check all cable connections.

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

Your Graphtec CE8000-60 Plus Cutter Plotter is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or further inquiries, please visit the official Graphtec America websaiti kana kubata dhipatimendi ravo rebasa revatengi.