Bhuku rekushandisa reJHS Pedals Flight Delay Pedals

1. Nhanganyaya

This manual provides comprehensive instructions for the JHS Pedals Flight Delay Pedal. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the pedal.

The JHS Flight Delay pedal is designed to offer essential delay types with user-friendly controls. It features three distinct delay modes: Analog, Reverse, and Digital, alongside modulation options including Chorus and Vibrato. This pedal aims to provide versatile delay effects without complex menu navigation.

2. Safety Information

Magetsi: Use only a regulated 9V DC, center-negative power supply with a minimum current rating of 85mA. Incorrect power supplies can damage the unit and void the warranty.
Environment: Do not expose the pedal to water, moisture, excessive heat, or direct sunlight. Operate in a clean, dry environment.
Kubata: Avoid dropping the pedal or subjecting it to strong impacts. Do not attempt to open the enclosure or modify the internal circuitry, as this will void the warranty.
Tambo: Ensure all audio cables are in good condition to prevent unwanted noise or signal loss.

3. Package Zviri mukati

JHS Pedals Flight Delay Pedal (Model FDBL)
Mushandisi Chinyorwa (gwaro iri)

4. Chigadzirwa Pamusoroview

The JHS Flight Delay Pedal features a straightforward control layout designed for intuitive use. Below is an illustration of the pedal and a description of its controls.

Mufananidzo 1: Mberi view of the JHS Pedals Flight Delay Pedal (Blue variant).

JHS Pedals Flight Delay Pedal in blue and white variants

Figure 2: JHS Pedals Flight Delay Pedal shown in both blue and white color options.

Zvinodzora:

MIX Knob: Adjusts the balance between the dry (unaffected) signal and the wet (effected) delay signal. Turning clockwise increases the delay effect's presence.
REPEATS Knob: Controls the number of delay repetitions. From a single repeat to self-oscillation.
EQ Knob: Shapes the tone of the delay repeats, allowing for brighter or darker echoes.
MOD RATE Knob: Determines the speed of the modulation effect (Chorus or Vibrato).
MOD DEPTH Knob: Controls the intensity or depth of the modulation effect.
TIME Knob: Sets the delay time, from short slap-back to long, ambient delays.
Left Toggle Switch (Delay Mode): Selects between Analog, Reverse, and Digital delay types. Musical note symbols indicate notation intervals for tap tempo.
Right Toggle Switch (Modulation Type): Selects between Chorus, Off (no modulation), and Vibrato.
Left Footswitch: Engages or bypasses the delay effect.
Right Footswitch: Typically used for Tap Tempo functionality, allowing you to set the delay time by tapping the switch.

5. Setup

Follow these steps to integrate your Flight Delay Pedal into your audio setup:

Power Connection: Connect a regulated 9V DC, center-negative power supply (not included) to the power input jack on the pedal. Ensure the power supply meets the specified requirements (85mA minimum).
Input Connection: Connect your instrument (e.g., guitar) or the output of a preceding effects pedal to the INPUT jack on the Flight Delay Pedal using a standard 1/4-inch instrument cable.
Output Connection: Connect the OUTPUT jack of the Flight Delay Pedal to your amplifier's input or the input of the next effects pedal in your signal chain using a standard 1/4-inch instrument cable.
Power On: Once all connections are secure, connect your power supply to a wall outlet. The pedal is now ready for use.

6. Operating Instructions

6.1 Basic Delay Operation

Kuita Mhedzisiro: Press the left footswitch to toggle the delay effect on or off. The LED indicator will illuminate when the effect is active.
Kugadzirisa Kunonoka Nguva: Shandisa iyo NGUVA knob to set the duration between repeats. Rotate clockwise for longer delay times, counter-clockwise for shorter times.

Close-up of the TIME knob on the JHS Flight Delay Pedal

Figure 3: Detail of the TIME knob, used to adjust delay duration.

Setting Repeats: The ZVINODZORERA knob controls the number of echoes. Turn clockwise for more repeats, reaching self-oscillation at maximum settings.

Close-up of the REPEATS knob on the JHS Flight Delay Pedal

Figure 4: Detail of the REPEATS knob, controlling the number of delay echoes.

Blending the Effect: Shandisa iyo MIX knob to adjust the volume balance between your dry signal and the delayed signal.

Close-up of the MIX knob on the JHS Flight Delay Pedal

Figure 5: Detail of the MIX knob, used to blend dry and wet signals.

Shaping Delay Tone: The EQ knob allows you to brighten or darken the tone of the delay repeats.

Close-up of the EQ knob on the JHS Flight Delay Pedal

Figure 6: Detail of the EQ knob, for tonal adjustment of delay repeats.

6.2 Delay Modes

Shandisa iyo left toggle switch to select one of three distinct delay modes:

Analogi: Emulates classic analog delays, providing warm, darker, and decaying repeats.
Reverse: Plays the delay repeats backward, creating unique textural effects.
Digital: Offers clear, pristine, and accurate repeats, ideal for modern sounds.

6.3 Kusiyanisa Mhedzisiro

The Flight Delay Pedal includes built-in modulation. Use the right toggle switch to select the modulation type:

Korasi: Adds a swirling, thickening effect to the delay repeats.
Off: Disables the modulation effect.
Vibrato: Introduces a pitch-bending effect to the delay repeats.

Gadzirisa iyo MOD CHIKAMU uye MOD DZAKA knobs to fine-tune the speed and intensity of the selected modulation effect.

Close-up of the delay mode and modulation type toggle switches on the JHS Flight Delay Pedal

Figure 7: Detail of the delay mode (left) and modulation type (right) toggle switches.

6.4 Tap Tempo and Notation Intervals

The right footswitch typically functions as a Tap Tempo control. Tap it two or more times to set the delay time. The left toggle switch also features musical note symbols, indicating options for notation intervals (e.g., quarter notes, dotted eighth notes) when using tap tempo. Refer to the official JHS Pedals website or product page for specific tap tempo subdivision instructions.

Close-up of the footswitches on the JHS Flight Delay Pedal

Figure 8: Detail of the two footswitches, for bypass and tap tempo control.

7. Kuchengeta

Kuchenesa: Shandisa jira rakapfava, rakaoma kuchenesa kunze kwepedal. Dzivisa zvinochenesa zvinogumbura kana zvinonyungudutsa.
Kuchengeta: When not in use for extended periods, store the pedal in a cool, dry place, away from extreme temperatures and humidity.
Cable Inspection: Regularly check all audio and power cables for signs of wear or damage. Replace faulty cables immediately.

8. Kugadzirisa matambudziko

Hapana Inzwi:
- Iva nechokwadi chekuti magetsi akabatana nemazvo uye anoshanda nemazvo.
- Tarisa tambo dzese dzeaudio kuti dzione kana dzakabatana zvakanaka uye kuti dzakasimba.
- Verify that the pedal is engaged (LED illuminated).
- Confirm that the MIX knob is not set to fully dry.
Ruzha/Humming Isingadiwe:
- Shandisa magetsi emhando yepamusoro, akaparadzana.
- Check for faulty or unshielded audio cables.
- Ensure proper grounding in your electrical setup.
Mhedzisiro Isina Kufadza:
- Press the left footswitch firmly.
- Check power and cable connections.

9. Zvinotsanangurwa

Feature	Tsanangudzo
Model Number	FDBL
Item Weight	1.17 makirogiramu (0.53 kg)
Product Dimensions	6.65 x 4.35 x 3.35 inches (16.9 x 11.0 x 8.5 cm)
Simba Rinodiwa	9V DC, Center-Negative
Current Draw	85 mamiriyoniamps
Hardware inowanikwa	1/4-inch Audio Input/Output

10. Ruzivo rweWaranti

JHS Pedals products are covered by a limited warranty against defects in materials and workmanship. The warranty period and terms may vary by region. Please retain your proof of purchase. For detailed warranty information, please visit the official JHS Pedals websaiti kana kubata rutsigiro rwevatengi.

11. Tsigiro

If you encounter any issues not covered in this manual or require further assistance, please visit the official JHS Pedals website for FAQs, additional resources, and contact information for customer support.

	JHS 3 Series Oil Inogona Kunonoka Pedal - Gwaro reMushandisi uye Ruzivo rweWaranti Gwaro rakakwana reJHS 3 Series Oil Can Delay pedal, rinofukidza zvinhu zvinodzora, zvinobatanidza, uye ruzivo rwewarandi. Rinowanikwa muChirungu, Spanish, German, French, uye Italian.
	Bhuku rekushandisa reJHS Pedals Violet Distortion Guitar Effect Pedal Ruzivo rwakadzama nezve JHS Pedals Violet Distortion, pedal inodhiraivha/inotsvedza yakagadzirwa pamwe chete naLari Basilio, kusanganisira EQ yayo yakasiyana, ma controls, specifications, simba rinodiwa, uye ruzivo rwewaranti.
	JHS 3 Series Phaser: Controls uye Jacks Anotsanangurwa Tsvaga maficha eJHS 3 Series Phaser, inogoneka matanhatu-stage phaser pedal. Dzidza nezvekutonga kwayo seBlend, Rate, Width, uye Feedback, pamwe nekuisa kwayo, kuburitsa, uye kutsanangurwa kwesimba.
	JHS Overdrive Preamp: Classic DOD 250 Varaidzo Tsvaga iyo JHS Overdrive Preamp, nhandaro yakatendeka yeDOD isingawanzoitiki 250. Dzidza pamusoro pekutonga kwayo: Level, Gain, Slider clipping variations, uye Masimba emagetsi kune vanoridza gitare.
	JHS 3 Series Octave Reverb Pedal: Specifications, Controls, and Warranty Comprehensive details for the JHS 3 Series Octave Reverb guitar effects pedal, covering its controls, input/output jacks, power requirements, and warranty information.
	JHS 3 Series Harmonic Tremolo Pedal - User Guide Information on the JHS 3 Series Harmonic Tremolo guitar pedal, including its controls, jacks, and power specifications.

JHS Pedals FDBL