BOYA 4-Channel 2.4G Wireless Microphone System User Manual

1. Chigadzirwa Pamusoroview

The BOYA 4-Channel 2.4G Wireless Microphone System is designed for high-quality audio capture with smartphones and other compatible devices. This system features automatic pairing, intelligent noise cancellation, and a long transmission range, making it suitable for various recording scenarios.

Zvinokosha:

• 4-Channel Wireless System: Supports up to four microphones simultaneously with automatic pairing for ease of use.
• 200M Transmission Range: Utilizes 2.4G digital frequency for stable connection up to 200 meters in open environments.
• Superior Audio Hunhu: Achieves an SNR of 80dB and 48K/16bit recording, with 120dB SPL to prevent distortion.
• Advanced Noise Cancellation: Features dual intelligent noise cancellation technology and a windscreen for clear audio in noisy settings.
• Yakasiyana Dhizaini: TX microphone includes a rotating clip and omnidirectional diaphragm. Comes with a portable charging case.

2. Setup Instructions

2.1 Unboxing uye Yekutanga Kuchaja

Upon unboxing, ensure all components are present: Transmitter(s) (TX), Receiver (RX), and Charging Case. It is recommended to fully charge the transmitters and receiver using the provided charging case before first use.

• Place the transmitters and receiver into the charging case.
• Connect the charging case to a USB-C power source (DC 5V/2A) using a compatible cable.
• Charging indicators on the devices will show charging status. A full charge typically takes approximately 2 hours for the case and individual units.

2.2 Kubatanidza Receiver

The receiver is designed to connect directly to your smartphone or compatible device. For the Lightning version, plug the receiver into the Lightning port of your iPhone or iPad.

2.3 Kubatanidza otomatiki

The BOYA system features automatic pairing. Once the transmitters are powered on and the receiver is connected to your device, they should automatically establish a connection. A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

3. Operating Instructions

3.1 Kubatidza/Kudzima

To power on a transmitter, press and hold the power button until the indicator light illuminates. Repeat for all desired transmitters. To power off, press and hold the power button again until the light turns off.

3.2 Kuiswa kweMaikorofoni

Attach the transmitter to your clothing using the rotating clip. For optimal sound capture, position the microphone approximately 6-8 inches (15-20 cm) from your mouth. The omnidirectional polar pattern captures sound from all directions, providing flexibility in placement.

3.3 Kudzima ruzha

The system features intelligent noise cancellation. To activate or deactivate noise cancellation, press the dedicated noise reduction button on the transmitter. The indicator light will change color (e.g., static green for enabled, static blue for disabled) to confirm the status.

3.4 Monitoring Audio and Smartphone Speaker Support

When the receiver is connected to your smartphone, you can monitor the audio through headphones connected to the receiver's monitoring port (if available) or directly through the smartphone's speakers. If your phone's speaker is enabled, sound can be played directly without unplugging the receiver.

4. Kuchengeta

4.1 Kuchenesa

Wipe the microphone transmitters, receiver, and charging case with a soft, dry cloth. Do not use liquid cleaners or solvents, as these can damage the devices. Ensure no moisture enters the ports or microphone capsules.

4.2 Kuchengeta

Store the system in its charging case or a protective pouch when not in use. Keep it in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid storing near strong magnetic fields.

4.3 Kuchengeta Battery

To prolong battery life, avoid fully discharging the devices frequently. If storing for an extended period, charge the batteries to approximately 50% every few months.

5. Kugadzirisa matambudziko

• Hapana Kubuda Munzwi:
  • Ensure both transmitter(s) and receiver are powered on and fully charged.
  • Verify the receiver is securely connected to your recording device.
  • Check the recording app settings on your smartphone to ensure the external microphone is selected.
  • Confirm the devices are paired (indicator lights are solid). If not, power cycle both units.
• Kusapindira/Kusava Nehunhu Hwakanaka Hwekuteerera:
  • Iva nechokwadi chekuti maikorofoni iri panzvimbo yayo zvakanaka uye haina kuvharika.
  • Activate noise cancellation if in a noisy environment.
  • Move closer to the receiver to reduce the transmission distance.
  • Avoid environments with strong 2.4Ghz interference (e.g., Wi-Fi routers, other wireless devices).
• Hupenyu Hupfupi Hwebhatiri:
  • Ensure devices are fully charged before use.
  • Kushanda kwebhatiri kunogona kudzikira nekufamba kwenguva kana ikashandiswa zvakanyanya.
• Devices Not Pairing:
  • Power off and then power on both the transmitter(s) and receiver.
  • Ensure they are within close proximity during the initial pairing attempt.

6. Zvinotsanangurwa

Rinofambisa (TX)

Receiver (RX)

Kuchaja Case

General Product Specifications

7. Warranty & Tsigiro

For detailed warranty information and technical support, please refer to the official BOYA websaiti kana kubata basa ravo revatengi zvakananga. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kune chero vimbiso yewaranti.

Manufacturer: BOYA

Kuti uwane rumwe rubatsiro, shanya: BOYA Official Store on Amazon