XPG VALOR AIR PLUS Mid-Tower PC Chassis User Manual

1. Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of your XPG VALOR AIR PLUS Mid-Tower PC Chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and to prevent damage to your components. The XPG VALOR AIR PLUS is designed to accommodate mid- to high-end PC components, offering robust cooling and expandability.

Figure 1: XPG VALOR AIR PLUS Mid-Tower PC Chassis (White) with illuminated ARGB fans.

2. Safety Information

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Handle all components with care to avoid damage. Static electricity can harm sensitive electronic parts. Consider using an anti-static wrist strap.
• Chengetedza zvidimbu zvidiki uye zvekurongedza zviri kure nevana.
• Ita shuwa kufefetera kwakaringana kwakatenderedza chassis kudzivirira kupisa.
• Do not attempt to modify the chassis or its components, as this may void your warranty and pose safety risks.

3. Package Zviri mukati

Iva nechokwadi chekuti zvinhu zvese zviripo mupakeji usati waenderera mberi nekuisa:

• XPG VALOR AIR PLUS Mid-Tower PC Chassis
• Accessory Box (screws, cable ties, standoffs, etc.)
• Mushandisi Chinyorwa (gwaro iri)
• Pre-installed 120mm ARGB Fans (4 units, in select models)

4. Chigadzirwa Pamusoroview

Familiarize yourself with the various parts of the XPG VALOR AIR PLUS chassis.

4.1 Pamberi Panel

Figure 2: Front panel with magnetic mesh design for optimal airflow.

The front panel features a magnetic mesh design, allowing for easy removal and excellent airflow. This design also highlights the pre-installed ARGB fans.

4.2 Top I/O Panel

Figure 3: Top I/O panel with USB ports, audio jacks, and power/reset buttons.

The top I/O panel includes: Power Button, Reset Button, 2x USB 3.2 Type-A ports, Headphone Jack, and Microphone Jack.

4.3 Marongerwo Emukati

Figure 4: Internal structure highlighting motherboard compatibility and fan locations.

The spacious interior supports various motherboard form factors (Micro ATX, ATX) and offers multiple mounting points for fans and radiators. It features a dedicated PSU shroud for a clean build.

5. Kugadzirisa uye Kuisa Zvikamu

Follow these steps to install your PC components into the XPG VALOR AIR PLUS chassis.

5.1 Kugadzirira

• Gather necessary tools: Phillips head screwdriver, cable ties (included), anti-static wrist strap (recommended).
• Prepare a clean, flat workspace.
• Remove the side panels. Typically, these are secured with thumbscrews at the rear of the chassis.

Mufananidzo 5: Yakaputika view demonstrating removable panels and dust filters for easy access and maintenance.

5.2 Kuisirwa mamaboardboard

1. Install the I/O shield into the rear opening of the chassis (if not pre-attached to your motherboard).
2. Align the motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Secure the motherboard with the appropriate screws from the accessory box.

5.3 Kuisa Simba Chikamu (PSU) Kuisirwa

1. Locate the PSU mounting area at the bottom rear of the chassis.
2. Slide the PSU into position from the rear.
3. Secure the PSU with screws from the accessory box.

5.4 Kuisa Dhiraivha Yekuchengetera Zvinhu

The chassis supports 2.5" SSDs and 3.5" HDDs. Refer to the chassis interior for specific mounting locations (e.g., behind the motherboard tray, drive cages).

• For 2.5" SSDs: Secure with screws to designated mounting points.
• For 3.5" HDDs: Slide into drive cages and secure with screws or tool-less mechanisms.

5.5 Graphics Card (GPU) and Expansion Card Installation

1. Bvisa zvivharo zvePCIe slot zvinodiwa kubva kumashure kwechassis.
2. Insert the graphics card or other expansion card into the appropriate PCIe slot on the motherboard.
3. Secure the card with the provided screw or retention clip.

5.6 Cable Management

Mufananidzo 6: Rear mukati view demonstrating cable routing channels and tie-down points.

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. Use the included cable ties to secure bundles.

5.7 Panel Yepamberi I/O Inobatanidza

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 3.2, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

6. Operating Instructions

6.1 Simba rekutanga

1. Ensure all components are securely installed and all necessary cables are connected.
2. Close and secure the side panels.
3. Connect your monitor, keyboard, mouse, and power cable to the PSU.
4. Flip the power switch on the PSU to the 'ON' position.
5. Press the Power Button on the top I/O panel of the chassis.

6.2 ARGB Fan Control

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through a dedicated ARGB controller (if included with your specific model or purchased separately). Refer to your motherboard manual or ARGB controller instructions for detailed customization options.

7. Kuchengeta

Kugaro gadzirisa kunobatsira kuve nechokwadi chekuita kwakaringana uye hupenyu hurefu hwezvinhu zvePC yako.

7.1 Cleaning the Chassis

• Shandisa nyoro, damp cloth to wipe down exterior surfaces. Avoid abrasive cleaners.
• For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged before cleaning.

7.2 Dust Filter Maintenance

The XPG VALOR AIR PLUS features removable dust filters (e.g., front, top, bottom). Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the chassis.

1. Gently remove the dust filters.
2. Clean them with water and mild soap, or use a vacuum cleaner/compressed air.
3. Iva nechokwadi chekuti mafirita acho akaoma zvachose usati waisa zvakare.

8. Kugadzirisa matambudziko

Ichi chikamu chinotarisa zvinowanzoitika zvaungasangana nazvo.

8.1 System Does Not Power On

• Tarisa Power Connections: Ensure the PSU is properly connected to the wall outlet and the PSU's power switch is ON. Verify all internal power cables (24-pin ATX, CPU, GPU, etc.) are securely connected to the motherboard and components.
• Front Panel Connections: Confirm that the Power SW cable from the chassis is correctly connected to the motherboard's front panel header.
• PSU Basa: If possible, test the PSU with another system or use a PSU tester.

8.2 Fans Not Spinning / ARGB Not Lighting Up

• Simba reFan: Ensure fan power cables are connected to appropriate headers on the motherboard or a fan controller.
• Kubatana kweARGB: Verify ARGB cables are connected to a compatible 3-pin 5V ARGB header on the motherboard or an ARGB controller. (Note: Do not connect 5V ARGB to 12V RGB headers).
• Software/Controller: Check your motherboard's BIOS/UEFI settings or ARGB software for fan speed and lighting control.

8.3 Poor Airflow / High Temperatures

• Dust Sefa: Clean all dust filters regularly.
• Kutungamirirwa nevateveri: Ensure fans are oriented correctly for optimal intake and exhaust airflow.
• Cable Management: Improve cable management to reduce obstructions to airflow.

9. Zvinotsanangurwa

Ongorora: Zvinotsanangurwa zvinogona kuchinja pasina chiziviso chekutanga.

10. Warranty uye Tsigiro

XPG products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the official XPG websaiti kana kadhi rewaranti rinosanganisirwa nechigadzirwa chako.

Mutengi Support

If you encounter any issues or have questions regarding your XPG VALOR AIR PLUS chassis, please contact XPG customer support through their official website. Have your product model number (VALORAIRPLUSMTA-WHCWW) and proof of purchase ready when contacting support.

Visit the XPG Store on Amazon kuti uwane rumwe ruzivo uye zvigadzirwa.