1. Nhanganyaya
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Douk Audio A5 TPA3255 Stereo Amplifier. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The Douk Audio A5 is a high-fidelity Class D power amplifier designed for home stereo and theater audio systems, offering powerful and clear sound reproduction for passive bookshelf or tower speakers.
2. Safety Information
- Magetsi: Use only the provided power adapter or one with identical specifications (DC 24V-48V). Incorrect voltage inogona kukuvadza mudziyo.
- Kufefetedza Ita shuwa kuti kune ventilation yakakwana yakatenderedza amplifier. Do not block ventilation openings. Avoid placing the unit in enclosed spaces or on soft surfaces that may impede airflow.
- Unyoro: Keep the amplifier away from water, moisture, and high humidity environments. Do not operate with wet hands.
- Kupisa: The casing may become warm during operation, which is normal. Avoid placing the unit near heat sources or in direct sunlight.
- Kubata: Bata mudziyo wacho nokungwarira. Dzivisa kudonhedza kana kuukanda pasi zvine simba.
- Sevhisi: Do not attempt to open or repair the unit yourself, except for specified user-serviceable parts like op-amps. Refer all servicing to qualified personnel.
3. Chii chiri muBhokisi
Pakuburitsa, ndokumbirawo uone kuti zvinhu zvese zvinotevera zvinosanganisirwa:
- 1 x Douk Audio A5 Amplifier
- 1 x DC 32V/5A Power Adapter
- 1 x Chinyorwa cheMushandisi (gwaro iri)
4. Chigadzirwa Pamusoroview
4.1 Front Panel Controls
Image: Front panel of the Douk Audio A5 amplifier.
The front panel features two main control knobs and a power button. The left knob controls the High-Pass Filter (HPF) frequency, ranging from 30Hz to 200Hz, with an 'off' position. The right knob serves as both the power on/off switch and the volume control.
4.2 Rear Panel Connections
Image: Rear panel connections of the Douk Audio A5 amplifier.
Panel yekumashure inopa zvese zvinodiwa zvekubatanidza zvinhu zvinopinda uye zvinobuda:
- RINORATIDZWA MU (RCA): Stereo RCA input for connecting audio sources like CD players, DACs, or preamplifiers.
- AUX OUT (3.5mm): 3.5mm auxiliary output, typically used for connecting to an active subwoofer.
- SPK OUT (Speaker Terminals): Gold-plated binding posts for connecting passive speakers. Ensure correct polarity (red for positive, black for negative).
- DC 24V-48V: Power input for the DC power adapter.
4.3 Internal Components and Op-Amp Rolling
Mufananidzo: Mukati view of the Douk Audio A5, highlighting the op-amp zvigadziko.
The Douk Audio A5 features a transparent top panel, allowing visibility of the internal circuitry. This design also facilitates easy access to the op-amp sockets for users who wish to customize the sound profile by 'op-amp rolling'.
4.4 LED Ambiance and PFFB Technology
Image: Internal LED lighting and color selection DIP switches.
The amplifier includes adjustable internal LED lighting with multiple color options, controlled by DIP switches located on the circuit board. This allows for aesthetic customization. The unit also incorporates Post-Filter Feedback (PFFB) technology and a 4-layer immersion gold PCB, which contribute to reduced distortion, improved frequency response, and efficient heat management.
4.5 Kubvisa Kupisa
Image: Heat dissipation pathways of the amplifier.
The amplifier's design includes advanced full-body heat dissipation to ensure stable performance even during prolonged high-power output. It is normal for the casing to become warm during operation.
5. Setup Instructions
Follow these steps to set up your Douk Audio A5 amplifier:
- Batanidza Maspika: Connect your passive speakers to the 'SPK OUT' binding posts on the rear panel. Ensure that the positive (+) terminal of the amplifier connects to the positive terminal of the speaker, and the negative (-) terminal connects to the negative terminal. Tighten the binding posts securely. The amplifier supports speakers with an impedance of 4Ω to 8Ω.
- Batanidza Audio Source: Connect your audio source (e.g., CD player, DAC, computer) to the 'AUDIO IN' RCA inputs on the rear panel using appropriate RCA cables.
- (Optional) Connect Subwoofer: If using an active subwoofer, connect its input to the 'AUX OUT' 3.5mm jack on the amplifier using a 3.5mm audio cable.
- Batanidza Simba: Connect the provided DC 32V/5A power adapter to the 'DC 24V-48V' input on the rear panel. Then, plug the power adapter into a wall outlet.
- Power On: Turn the right knob on the front panel clockwise to power on the amplifier. The internal LEDs will illuminate.
Vhidhiyo Yekuratidzira Kugadzika
Video: A demonstration of the Douk Audio A5 amplifier's features and setup, including internal component access and LED lighting.
6. Operating Instructions
6.1 Basic Operation
- Batidza/Kudzima: Rotate the right knob clockwise to turn on the amplifier. Rotate it counter-clockwise until it clicks to turn off.
- Kudzora inzwi: Adjust the right knob clockwise to increase volume and counter-clockwise to decrease volume.
6.2 High-Pass Filter (HPF) Adjustment
Image: High-Pass Filter control and its effect on frequency response.
The left knob controls the High-Pass Filter. This feature allows you to cut off low frequencies from your main speakers, which is particularly useful when using an active subwoofer. By filtering out low frequencies from your main speakers, you can improve their clarity and allow the subwoofer to handle the bass more effectively.
- Rotate the left knob to select a cutoff frequency between 30Hz and 200Hz.
- Set the knob to 'off' to bypass the HPF and allow full-range audio to your main speakers.
6.3 Op-Amp Replacement (Op-Amp Rolling)
Image: Demonstrating op-amp replacement using tweezers.
The Douk Audio A5 allows for easy replacement of operational ampmafirita (op-amps) to customize the amplifier's sound characteristics. This process is known as 'op-amp rolling'.
- Kudzima uye Bvisa: Iva nechokwadi chekuti amplifier is powered off and disconnected from the power supply.
- Bvisa Paneri Yepamusoro: Carefully lift the transparent top panel to access the internal circuit board.
- Remove Existing Op-Amps: Using a suitable tool (e.g., IC extractor or small flat-head screwdriver), gently pry up the existing op-amp chips from their sockets. Be careful not to bend the pins.
- Insert New Op-Amps: Align the pins of the new op-amp chips with the sockets. Ensure the orientation (usually indicated by a dot or notch on the chip and socket) is correct. Gently press the op-amps into place until they are fully seated.
- Tsiva Panel Yepamusoro: Carefully place the transparent top panel back onto the amplifier.
- Batanidza Simba uye Muedzo: Reconnect the power supply and power on the amplifier to test the new op-amps.
Note: Only replace op-amps with compatible models. Refer to online resources or consult with audio experts if unsure.
6.4 Adjusting LED Colors
The internal LED lighting can be adjusted to various colors using DIP switches on the circuit board. To change the color:
- Kudzima uye Bvisa: Iva nechokwadi chekuti amplifier is powered off and disconnected from the power supply.
- Bvisa Paneri Yepamusoro: Carefully lift the transparent top panel.
- Locate DIP Switches: Identify the small DIP switches on the circuit board, typically labeled 1, 2, 3, and R, G, B.
- Adjust Switches: Use a small tool (like tweezers or a pen tip) to toggle the switches to achieve your desired color combination. Refer to the diagram on the circuit board or in the image above for specific color settings.
- Tsiva Panel Yepamusoro: Carefully place the transparent top panel back onto the amplifier.
- Reconnect Power: Reconnect the power supply and power on the amplifier to see the new LED color.
7. Kuchengeta
- Kuchenesa: Shandisa jira rakapfava, rakaoma kuchenesa kunze kwe ampUsashandise zvinhu zvinochenesa mvura kana zvinhu zvinogumbura.
- Kuchengeta: Kana isiri kushandiswa kwenguva yakareba, chengetedza amplifier munzvimbo inotonhorera, yakaoma, kure nezuva rakananga uye tembiricha yakanyanya.
- Kufefetedza Regularly check that the ventilation holes are free from dust and debris to prevent overheating.
8. Kugadzirisa matambudziko
If you encounter any issues with your Douk Audio A5 amplifier, please refer to the following troubleshooting guide:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Hapana simba | Power adapta isina kubatana kana kukanganisa; magetsi haashande. | Iva nechokwadi chekuti adapta yemagetsi yakabatana zvakachengeteka kune ese ari maviri amplifier and a working power outlet. Test the outlet with another device. |
| Hapana inzwi rinobuda | Incorrect speaker connections; audio source not connected or playing; volume too low; incorrect input selection (if applicable). | Check all speaker and audio source connections for proper seating and polarity. Ensure the audio source is playing and the amplifier volume is turned up. |
| Inzwi rakakanganiswa | Volume too high; faulty cables; incorrect speaker impedance; damaged speakers. | Reduce the volume. Check audio cables for damage and replace if necessary. Ensure your speakers' impedance is compatible (4-8Ω). Test with different speakers if possible. |
| Inzwi repakati | Loose connections; faulty cables; overheating. | Check all connections. Ensure the amplifier ine mhepo yakakwana kudzivirira kupisa. |
| HPF not working | HPF knob set to 'off'. | Rotate the left HPF knob to a frequency setting (e.g., 30Hz, 80Hz, 200Hz) instead of 'off'. |
If the problem persists after trying these solutions, please contact Douk Audio customer support for further assistance.
9. Zvinotsanangurwa
Image: Output power table for Douk Audio A5.
| Feature | Tsanangudzo |
|---|---|
| Model | A5 |
| Brand | Sravana Sameeralu Serial 4th Audio |
| Nhamba yeChannels | 2 |
| Amplifier Chip | TPA3255 |
| Output Power (32V/5A) | 78W+78W (4Ω), 71W+71W (6Ω), 65W+65W (8Ω) |
| Output Power (36V/6A) | 107W+107W (4Ω), 100W+100W (6Ω), 94W+94W (8Ω) |
| Output Power (48V/5A) | 120W+120W (4Ω), 110W+110W (6Ω), 102W+102W (8Ω) |
| Output Power (48V/10A) | 250W+250W (4Ω), 210W+210W (6Ω), 185W+185W (8Ω) |
| High-Pass Sefa (HPF) | Adjustable 30-200Hz |
| Input Sensitivity | 0.775V |
| Frequency Response | 20Hz-20kHz (±0.5dB) |
| SNR | ≥108dB |
| THD | 0.002% |
| Mutauri Impedance | 4-8Ω |
| Audio Input | Redhiyo RCA |
| Audio Output | Speaker Terminals, 3.5mm AUX Out |
| Kushanda Voltage | DC 24V-48V |
| Dimensions (W*D*H) | 102mm x 130mm x 33mm (4.02in x 5.12in x 1.30in) |
| Net Weight | 506g (1.12lb) |
| Material | Aluminium |
10. Warranty uye Tsigiro
10.1 Ruzivo rweWaranti
Douk Audio products typically come with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Douk Audio website for specific warranty terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.
10.2 Mutengi Tsigiro
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Douk Audio customer support. You can usually find contact information on the official Douk Audio websaiti kana kuburikidza nemutengesi kwawakatenga chigadzirwa.
Zvekushandisa Pamhepo:
- Visit the Douk Audio Store on Amazon kune ruzivo rwechigadzirwa uye zvigadziriso.
