SHEHDS 90W LED RGBW Bubble Machine User Manual

1. Yakakosha Mirayiridzo Yekuchengetedza

Please read and understand all safety instructions before installing, operating, or maintaining this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Kuchengetedzwa Kwemagetsi: Ita shuwa kuti magetsi anoenderana nevoltage requirements specified on the device. Always connect to a grounded outlet. Disconnect power before cleaning or servicing.
• Kubata Mvura: Use only approved bubble fluid. Do not ingest bubble fluid. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. Keep out of reach of children and pets.
• Kuiswa: Place the machine on a stable, level surface. Ensure adequate ventilation around the unit. Do not block air vents. Keep away from heat sources, open flames, and flammable materials.
• Environmental Conditions: This device is designed for indoor use or protected outdoor environments. Avoid exposure to rain, moisture, or extreme temperatures.
• Maintenance: Refer to the maintenance section for proper cleaning procedures. Do not attempt to repair the unit yourself; contact qualified service personnel.

2. Chigadzirwa Pamusoroview

The SHEHDS 90W LED RGBW Bubble Machine is an automatic bubble maker designed for stages, parties, weddings, and concerts. It features a powerful 7-blade fan engine, 6x4W RGBW LEDs for illuminated bubbles, and multiple control options.

Zvinokosha:

• Efficient Bubble Generation: Nozzle pipe system reduces bubble failure rates. Equipped with 5 oil nozzles and 24 bubble mold holes for high output.
• Powerful Fan: High-efficiency 7-blade fan propels bubbles up to 5 meters, producing over 3000 bubbles per minute.
• Mwenje ye LED Mhedzisiro: 6 RGBW LEDs create colorful bubble effects in dark environments.
• Large Fluid Tank: 1.5L capacity provides approximately 45 minutes of continuous operation, up to 1 hour at maximum capacity.
• Kudzora Modes: Supports DMX512, 20-meter wireless remote control, and manual control. DMX512 and power input/output interfaces support master-slave linking.
• Adjustable Angle: Manual tilt 180° adjustment for flexible positioning.

Mufananidzo 2.1: Pamusoroview of the SHEHDS 90W LED RGBW Bubble Machine, highlighting its 90W power and RGBW LED capabilities.

Image 2.2: Visual representation of the bubble machine's core features, including its adjustable tilt, multiple control options, and robust design.

3. Chii chiri muBhokisi

Iva nechokwadi chekuti zvikamu zvese zviripo pakuburitsa:

• 90W Bubble Machine
• 1.2m Powercon Cable (EU/US/AU/UK)
• 1.0m Signal Cable
• User Manual
• Remote Control

Image 3.1: Contents of the product packaging, including the bubble machine, power cable, signal cable, user manual, and remote control.

4. Setup uye Kuiswa

4.1 Kusunungura uye Kuisa

1. Nyatsobvisa zvese zvikamu kubva pakurongedza.
2. Place the bubble machine on a stable, flat surface. Ensure there is sufficient space around the unit for ventilation and bubble dispersion.
3. Keep the machine away from direct sunlight, heat sources, and areas with high humidity.

4.2 Filling the Fluid Tank

1. Locate the fluid tank on the side of the machine.
2. Unscrew the cap of the fluid tank.
3. Carefully pour high-quality bubble fluid into the tank, ensuring not to overfill. The tank has a 1.5L capacity.
4. Tsiva chivharo zvakasimba.

Image 4.1: The bubble machine with its fluid tank, ready for filling with bubble solution.

4.3 Simba Connection

1. Ensure the power switch on the back of the machine is in the OFF position.
2. Connect the provided Powercon cable to the 'POWER IN' socket on the machine.
3. Plug the other end of the Powercon cable into a suitable grounded power outlet.

Image 4.2: The rear panel of the bubble machine, displaying the power input/output, DMX connections, and the main power switch.

4.4 Kugadziriswa kweAngle

The machine supports a manual tilt of 180° for directing the bubble output. Loosen the adjustment knobs on the sides, set the desired angle, and then tighten the knobs to secure the position.

Image 4.3: The adjustable angle mechanism, allowing the machine to be tilted up to 180 degrees for optimal bubble dispersion.

5. Kushanda

5.1 Kubatidza

Flip the power switch on the back of the machine to the ON position. The control panel display will illuminate.

Image 5.1: The digital control panel of the bubble machine, used for manual settings and DMX address configuration.

5.2 Kudzora Modes

The SHEHDS bubble machine offers three primary control modes:

• Manual Control: Use the buttons on the control panel to adjust settings directly.
• Wireless Remote Control: Use the provided remote control for convenient operation from up to 20 meters away.
• DMX512 Kudzora: Connect the machine to a DMX controller using a signal cable for professional integration and synchronized effects. The DMX IN/OUT ports allow for master-slave linking with other compatible devices.

Image 5.2: Illustration of the various control methods available for the bubble machine, including remote, DMX, and manual operation.

5.3 LED Mwenje Migumisiro

The integrated RGBW LEDs can be controlled to produce various colored bubble effects. These lights enhance the visual impact, especially in low-light environments.

Image 5.3: Demonstrates the LED lighting effects, showing bubbles illuminated in various colors like red, green, blue, and white, as well as mixed color combinations.

6. Kuchengeta

6.1 Kuchenesa

1. Gara uchidzima magetsi usati wachenesa.
2. After each use, empty any remaining bubble fluid from the tank.
3. Clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
4. Periodically clean the bubble output nozzles and fan area to prevent residue buildup. Use a damp cloth or a small brush if necessary.

6.2 Kuchengeta

When not in use for extended periods, ensure the fluid tank is empty and clean. Store the machine in a cool, dry place, away from dust and extreme temperatures.

7. Kugadzirisa matambudziko

If you encounter issues with your SHEHDS bubble machine, refer to the following common problems and solutions:

Kana dambudziko rikaramba riripo mushure mekuyedza mhinduro idzi, ndapota taura nerutsigiro rwevatengi.

8. Zvinotsanangurwa

Detailed technical specifications for the SHEHDS 90W LED RGBW Bubble Machine:

Image 8.1: Detailed product dimensions and weight of the bubble machine for planning placement and transport.

9. Warranty uye Tsigiro

SHEHDS provides technical support and after-sales service for this product. If you have any questions or require assistance, please feel free to contact us.

• Warranty: This product includes a 1-year warranty.
• Returns/Replacements: A 1-month replacement policy is available.
• Tsigiro yehunyanzvi: Contact information for technical support can be found on the official SHEHDS websaiti kana kuburikidza nemutengesi wako.