1. Chigadzirwa Pamusoroview
The Ohniyou 48-inch Fandelier Ceiling Fan with Light (Model GLX120) combines the functionality of a ceiling fan with integrated LED lighting. Designed for both indoor and covered outdoor spaces, this unit offers versatile control and efficient air circulation.
- Remote Control: Manage fan speed, light color, and timer settings conveniently.
- Indoor / Kunze Kushandisa: Suitable for covered patios, kitchens, living rooms, and home offices.
- Reversible DC Motor: Provides cooling airflow in summer and helps circulate warm air in winter.
- Inogadziriswa Mwenje ye LED: Features 3 color temperatures (3000K, 4500K, 6000K) with a memory function.
- Quiet Operation: Operates at noise levels below 35 dB for a peaceful environment.
2. Setup uye Kuiswa
Before beginning installation, ensure the power supply to the installation area is turned off at the circuit breaker. Professional installation is recommended.
2.1 Kuvhura uye Chikamu Chengetedza
Carefully unpack all components and verify against the parts list. If any parts are missing or damaged, contact customer support immediately.
2.2 Matanho eGungano
- Isa Fan Blades: Insert the 2-hole end of each fan blade into the motor and secure with screws.
- Install Light Assembly: Remove three screw caps, tighten the screws securely, connect the LED light wire, then install the light cover retaining ring and light cover onto the motor.
- Prepare Downrod: Remove the cross pin and clamp pin from the downrod. Pass the wires through the middle of the downrod.
- Attach Downrod to Motor: Loosen the screws on the motor port, secure the downrod to the motor port, and install both the cross pin and the clamp pin. Tighten the screws on the motor port.
- Install Canopy and Coupling Cover: Thread the canopy and coupling cover through the downrod. Thread the downrod to the ball and tighten the screws.
- Mounting Bracket Installation: Chengetedza bhakiti rinosungirirwa padenga nemascrews.
- Wiring: Connect the ceiling wires to the receiver wires according to color codes.
- Final Assembly: Put the receiver and wires into the mounting bracket. Hang the downrod onto the mounting bracket. Finally, tighten the screws to secure the canopy.
2.3 Kuisa Vhidhiyo Yekutungamira
For a detailed visual guide on installation, please refer to the official installation video:
3. Operating Instructions
The Ohniyou Fandelier Ceiling Fan is controlled via the included remote control. Ensure batteries are installed in the remote (2x AAA batteries, not included).
3.1 Remote Control Mabasa
- ZVESE ZVAKAITWA: Turns off both the fan and the light.
- BATIDZA/KUDZIMA: Toggles the light on/off and cycles through color temperatures (3000K, 4500K, 6000K).
- Fan ON/OFF: Inobatidza kana kudzima feni.
- Kudzora Kumhanya (1-6): Inogadzirisa kumhanya kwefeni kubva pa1 (yakaderera) kusvika pa6 (yakakwirira).
- Natural Wind Mode: Activates a random speed change feature to simulate a natural breeze.
- Chinotora Nguva (1H/4H/8H): Seta iyo fan kuti idzime otomatiki mushure me1, 4, kana 8 maawa.
- Forward (F) / Reverse (R): Changes the direction of fan rotation for summer (downward airflow) or winter (upward airflow).
- Mute Bhatani: Turns the 'beeping' sound of the remote on/off.
3.2 Kugadzirisa Kumhanya Kwevateveri
The fan features 6 speed levels, providing up to 6088 CFM airflow. Levels 1-2 offer a low, comfortable breeze, levels 3-4 provide a medium natural wind, and levels 5-6 deliver high cooling wind.
3.3 Mwenje Options
The 36W LED light provides 2880 lumens and can be adjusted to three color temperatures: 3000K (Warm Light), 4500K (Natural Light), and 6000K (Cool Light). The light includes a memory function that recalls the last setting even after powering off.
3.4 Basa reMota Rinodzoserwa
Use the 'F' button on the remote for summer mode (forward rotation, downward airflow for cooling) and the 'R' button for winter mode (reverse rotation, upward airflow to circulate warm air).
4. Kuchengeta
Kugara kugadziridzwa kunovimbisa kuita kwakaringana uye hupenyu hurefu hweceiling fan yako.
- Kuchenesa: Periodically clean the fan blades and light cover with a soft, damp cloth. Avoid using abrasive cleaners that may damage the finish.
- Simbisa maFasteners: Check all screws and fasteners on the mounting bracket and fan assembly annually. Ensure they are securely tightened.
- Blade Balance: If the fan wobbles, check that all blades are securely attached and balanced. A blade balancing kit (not included) can be used if necessary.
- Mabatirwo emagetsi: Ensure all electrical connections remain secure. If you are unsure, consult a qualified electrician.
5. Kugadzirisa matambudziko
This section addresses common issues you might encounter with your Ohniyou Fandelier Ceiling Fan.
5.1 Remote Control Haisi Kushanda
- Tarisa Mabhatiri: Ensure the remote control has fresh AAA batteries and they are inserted correctly.
- Batanidzazve Remote: If the remote is unresponsive, it may need to be re-paired with the fan.
How to Re-pair the Remote Control:
- Use the wall switch or another method to cut off power to the fan.
- Mirira kwemasekonzi makumi matatu.
- Dzorera zvakare simba.
- Within three seconds of reconnecting power, long-press the 'pair' button on the remote. You will hear a "beeping beeping" sound, indicating successful pairing.
5.2 Fan Not Operating / Light Not Turning On
- Magetsi: Ensure the main power supply to the fan is on.
- Wiring: Check all electrical connections to ensure they are secure and correctly wired. If unsure, consult a qualified electrician.
- Remote Pairing: If the remote is not paired, the fan and light may not respond. Follow the re-pairing steps above.
5.3 Excessive Noise or Wobbling
- Simbisa Zvikukuru: Ensure all screws on the motor housing, blade attachments, and mounting bracket are tight.
- Blade Balance: Check if fan blades are balanced. Minor wobbling can sometimes be corrected with a blade balancing kit.
- Kukwidza: Verify the mounting bracket is securely fastened to a sturdy ceiling joist or outlet box rated for fan support.
6. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Brand | Ohniyou |
| Model Number | GLX120 |
| Color | Nhema |
| Product Dimensions | 48"D x 48"W x 13"H |
| Electric Fan Design | Ceiling Fani |
| Simba Source | AC |
| Style | Mazuvano |
| Room Type | Imba yekurara, Hofisi Yepamba, Kicheni, Imba yekutandarira |
| Special Features | Mwenje we LED, Kushanda Kwakanyarara, Kudzorwa Kure, Nguva |
| Inokurudzirwa Zvishandiso | Kutenderera Kwemhepo, Kutonhora |
| Noise Level | 35 Decibel |
| Nhamba yeBlades | 5 |
| Kuyerera Kwemhepo Kugona | 6088 Cubic Feet Per Minute |
| Voltage | 120 Volts |
| Chinja Type | Remote Control |
| Item Weight | 15 Pondo |
| Inosanganisirwa Zvikamu | Chiedza Kit, Remote |
| Indoor / Outdoor Kushandiswa | Indoor |
| Kudzora Nzira | Remote |
| Kubudirira | Kubudirira Kwepamusoro |
| Installation Type | Semi Flush Mount |
| Rudzi rweBulb | LED |
| Luminous Flux | 2880 Lumen |
7. Warranty uye Tsigiro
Ohniyou is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions, please contact our support team.
7.1 Zvikamu Zvisipo
If your product is missing any parts upon arrival, please do not worry. We will reissue the necessary parts.
7.2 Ruzivo rweKutaurirana
Please feel free to contact us via email for any inquiries or support needs:
Email: ohniyou@ledphy.com
We aim to reply within 12 hours.
