ANZZI Series Frameless Sliding Shower Door

Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of your ANZZI Series frameless sliding shower door. Please read all instructions carefully before beginning installation to ensure proper function and safety. Professional installation is recommended.

Mufananidzo 1: Mberi view of the ANZZI Series Frameless Sliding Shower Door.

Safety Information

• Nguva dzose pfeka magirazi ekuchengetedza panguva yekuisa.
• Handle glass panels with extreme care. Tempered glass can shatter if struck at the edges.
• Ensure all mounting surfaces are structurally sound and capable of supporting the weight of the shower door.
• Use appropriate tools and follow all local building codes.
• Usasimbise screws zvakanyanya, sezvo izvi zvingakuvadza zvikamu kana girazi.
• Chengetedza vana uye mhuka dzinovaraidza kure nenzvimbo yekuisa.

Package Zviri mukati

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ANZZI customer support.

• Tempered Clear Glass Panels (Deco-Glass, 3/8" / 10mm thick)
• Rhino Alloy Hardware (Brushed Gold finish)
• Sliding Rail and Rollers
• Wall Brackets and Support Bar
• Bottom Rail and Guide Block
• Mibato Yemasuo
• Sealing Strips and Gaskets
• Zvikuruu zveKuisa uye Zvibatiso

Zvinotsanangurwa

Figure 2: Product dimensions and reversible installation feature.

Setup uye Installation

For a visual guide, please refer to the official installation video below. Ensure you have all necessary tools and follow safety precautions.

Matanho ekuisa Makiyi:

1. Kuyera uye Gadzirira: Accurately measure your shower opening (W1 and W2) to ensure proper fit. Verify walls are plumb and level. Mark the installation points for the wall brackets.
2. Isa Mabhureki Emadziro: Drill holes at the marked locations. Secure the wall bracket plates, ensuring they are plumb.
3. Prepare Support Bar: Remove wall brackets from the support bar. If necessary, cut the support bar to the required length (W1 minus 1.5 inches).
4. Install Support Bar: Attach the support bar to the installed wall bracket plates. Ensure it is level and secure.
5. Install Bottom Rail and Guide Block: Position the bottom rail and guide block at the center of the shower base. Mark and drill holes. Secure with screws if drilling into acrylic or wood, or use silicone sealant for tile.
6. Attach Rollers to Glass Panels: Assemble the rollers, gaskets, washers, and stoppers onto the glass panels. Ensure the side holes point upward.
7. Hang Fixed Glass Panel: Carefully lift and hang the fixed glass panel onto the support bar. Ensure it is properly seated and secured.
8. Hang Sliding Glass Panel: Hang the sliding glass panel onto the support bar. Place a cloth or blanket under the door for protection during this step.
9. Adjust Door Alignment: Slightly push the door to the wall to check if the water sealing strip aligns. If not, loosen the screw of the roller and turn the eccentric block to adjust the door's position. Retighten screws after adjustment.
10. Isa Zvibatiso zveDoor: Attach the door handles to the designated holes on the glass panels using the provided screws, anchors, and gaskets.
11. Apply Silicone Sealant: Apply silicone sealant along the bottom rail and vertical edges where the glass meets the wall to ensure a watertight seal.

Figure 3: Reversible installation options for left or right opening.

Operating Instruction

Your ANZZI frameless sliding shower door is designed for smooth and quiet operation. To open or close the door, gently slide the handle along the track. Avoid forcing the door, as this may damage the rollers or track. The door features easy glide rollers for effortless movement.

Maintenance

Regular cleaning and maintenance will ensure the longevity and appearance of your shower door.

• Girazi Kuchenesa: The Tsunami Guard coating repels water, soap scum, and mineral staining, making cleaning easier. For best results, wipe down the glass after each use with a soft cloth or squeegee. For deeper cleaning, use a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that could damage the Tsunami Guard coating.
• Kuchenesa Hardware: Clean the brushed gold Rhino Alloy hardware with a soft, damp cloth. Do not use abrasive cleaners, steel wool, or cleaners containing ammonia, bleach, or acid, as these can damage the finish.
• Zvisimbiso uye Gaskets: Periodically check the sealing strips and gaskets for wear or damage. Replace them if necessary to maintain a watertight enclosure.
• Roller Maintenance: Ensure the rollers are free of debris and operate smoothly. If they become stiff, clean them and apply a small amount of silicone-based lubricant if needed.

Figure 4: Deco-Glass with Tsunami Guard coating for easy cleaning.

Kugadzirisa matambudziko

If you encounter issues with your shower door, try the following solutions:

• Door haritsvedzeri zvakanaka: Check rollers for debris. Clean and lubricate if necessary. Ensure the track is clear.
• Kubuda kwemvura: Inspect all silicone sealant lines and sealing strips. Reapply sealant or replace worn seals as needed. Ensure the door is properly aligned and closes completely.
• Door alignment issues: Refer to the installation video and step 9 in the Setup section to adjust the eccentric blocks on the rollers.

Warranty uye Support

ANZZI offers peace of mind with a Hupenyu hwese warranty on all products, reflecting our commitment to quality and durability. For technical assistance, replacement parts, or warranty claims, please contact ANZZI customer support.

ANZZI Customer Support:

• Websaiti: www.anzzi.com
• Runhare: 1-844-44-ANZZI (for general inquiries)
• Email: support@anzzi.com