Bhuku rekushandisa reHOMCOM Masaji Hofisi Yechigaro

Nhanganyaya

Thank you for choosing the HOMCOM Massage Office Chair. This chair is designed to provide comfort and support during your workday, featuring a multi-point vibration massage, lumbar heating, adjustable recline, and a retractable footrest. Please read this manual thoroughly before assembly and use to ensure proper operation and safety.

Mirayiridzo Yekuchengetedza

• Iva nechokwadi chekuti zvese zvirimo uye hazvina kukuvara usati wagadzira. Usashandise kana paine zvimwe zvikamu zvisipo kana kuti zvakatyoka.
• Follow the assembly instructions carefully. Incorrect assembly can lead to instability and injury.
• Usamire pachigaro kana kuchishandisa sechigaro chematanho.
• Do not exceed the maximum weight capacity of 120 kg (approximately 265 lbs).
• Keep children and pets away from the chair during assembly and use.
• Use the chair on a flat, stable surface.
• Unplug the massage and heat functions when not in use or before cleaning.
• Avoid spilling liquids on the control unit or electrical components.
• If you experience any discomfort or pain during massage, discontinue use immediately.

Package Zviri mukati

Before beginning assembly, verify that all the following components are included in your package:

• Massage Office Chair (main components: backrest, seat, armrests, base, wheels, gas lift)
• Wired Remote Control for massage and heat functions
• Assembly Hardware (screws, washers, tools if provided)
• User Manual

Note: Specific quantities of hardware may vary. Refer to the assembly diagram for exact counts.

Setup uye Assembly

Assembly is required for this chair. It is recommended to have two people for easier and safer assembly. Please follow these general steps. Refer to the included assembly diagram for detailed illustrations.

1. Unpack Components: Nyatsobvisa zvikamu zvese kubva pakurongedzerwa uye wozviisa panzvimbo yakachena, yakapfava kudzivirira makwara.
2. Assemble Base: Insert the five castors into the holes at the end of each leg of the chair base.
3. Isa Gas Lift: Isa silinda yekusimudza gasi muburi repakati pechigadziko chakabatanidzwa.
4. Batanidza Muchina paChigaro: Simbisa chigaro pasi pechitsigiro chechigaro uchishandisa sikuruu dzakapihwa. Iva nechokwadi chekuti kumberi kwechitsigiro kwakabatana nepamberi pechigaro.
5. Batanidza Chigaro kuGas Lift: Place the assembled seat onto the gas lift cylinder, ensuring it is firmly seated.
6. Batanidza Armrests: Secure the armrests to both the seat and the backrest using the designated screws. Do not overtighten initially.
7. Batanidza Backrest: Connect the backrest to the seat and armrests. Once all connections are made, tighten all screws securely.
8. Batanidza Simba: Plug the power adapter for the massage and heat functions into a suitable electrical outlet. Connect the chair's power cable to the adapter.

Image: Fully assembled HOMCOM Massage Office Chair in grey, positioned in a modern office environment with a desk and bookshelf.

Mufananidzo: Mberi nedivi view diagrams of the HOMCOM Massage Office Chair with key dimensions labeled in centimeters, including overall height, width, seat depth, and backrest height.

Operating Instruction

1. Massage and Heat Functions

The chair features a six-point vibration massage system with eight modes and adjustable intensity, along with a three-stage lumbar heating function. All functions are controlled via the wired remote control located in the side pocket.

• Bhatani reSimba: Press to turn the massage and heat functions ON/OFF.
• Bhatani reModhi: Cycle through the eight different massage modes.
• Kukurudzira Bhatani: Adjust the vibration intensity (low, medium, high).
• Heat Button: Activate or deactivate the lumbar heating function.
• Bhatani reTimer: Set a timer for the massage session (e.g., 15, 30, 60 minutes).
• Mabhatani eZone: Select specific massage zones (e.g., shoulders, waist, thighs).

Mufananidzo: Pamusoro view of the chair highlighting the six vibration massage points (2 shoulder, 2 waist with heat, 2 thigh) and displaying the wired remote control with its various function buttons.

2. Reclining Function and Footrest

The chair's backrest can recline up to 140 degrees, and it includes a retractable footrest for added comfort during breaks.

• Recline Lever: Locate the lever on the side of the chair (typically on the right). Pull the lever upwards to unlock the backrest, then lean back to your desired angle. Release the lever to lock the backrest in position.
• Chitsigiro chetsoka chinodzoserwa shure: Pull the footrest out from under the seat. Extend it fully for use. Push it back under the seat when not needed.

Mufananidzo: Side view of the HOMCOM Office Chair showing the backrest reclining to 140 degrees and the footrest extended. An inset image shows the recline lever.

3. Adjustable Seat Height

Adjust the seat height to find your optimal ergonomic position using the pneumatic gas lift.

• Kusimudza: While seated, lift the height adjustment lever (typically on the right side, below the seat) and slightly lift your weight off the seat. The seat will rise. Release the lever at the desired height.
• Kudzika: While seated, lift the height adjustment lever and apply your full weight to the seat. The seat will lower. Release the lever at the desired height.

Image: Two side views of the HOMCOM Office Chair demonstrating the adjustable seat height, with arrows indicating upward and downward movement and measurements for different heights.

4. Swivel and Castors

The chair features a 360-degree swivel seat and five smooth-rolling castors for easy mobility around your workspace.

• Swivel: The seat can rotate freely 360 degrees, allowing you to easily turn without moving the base.
• Castor: The five polyurethane castors are designed for smooth movement on various floor types, including hardwood, tile, laminate, and slate.

Mufananidzo: Kumberi-kurutivi view of the HOMCOM Office Chair with an arrow indicating 360-degree swivel motion and an inset image showing a close-up of one of the five smooth-rolling castors.

Maintenance

• Kuchenesa: Pakuchenesa kwakajairika, shandisa soft, damp cloth. For spot cleaning, use a mild fabric cleaner and follow the product instructions. Do not use harsh chemicals or abrasive cleaners.
• Magetsi Zvikamu: Ensure the chair is unplugged before cleaning any electrical parts. Do not immerse the remote control or power adapter in water.
• Hardware Check: Nguva nenguva tarisa masikuruu nemabhoti ese kuti uve nechokwadi chekuti akasimba. Sungazve kana zvichidikanwa kuti urambe wakasimba.
• Castor: Keep the castors free of hair and debris to ensure smooth movement.

Kugadzirisa matambudziko

Zvinotsanangurwa

Mufananidzo: Side profile diagram of a person sitting in the HOMCOM Office Chair, highlighting ergonomic support for the neck, shoulders, lumbar, and hips.

Image: A tall man sitting comfortably in the HOMCOM Office Chair, with text indicating "FOR BIG AND TALL" and features like "Big chair size," "Extra-wide seat area," and "Heavy-duty base." Note: The maximum weight capacity is 120 kg (265 lbs).

Warranty uye Support

Specific warranty information for the HOMCOM Massage Office Chair model 921-759V70GY is not provided in this manual. For warranty details, spare parts availability, or technical support, please contact HOMCOM customer service directly or refer to their official website. Chengeta risiti rako rekutenga seumboo hwekutenga.

Note: Spare parts availability information is currently unavailable.