1. Nhanganyaya
The ZIBOO FT-1000W Solar Panel Tester MPPT Meter is a professional-grade device designed for evaluating the performance of photovoltaic (PV) modules. It accurately measures maximum power (Pmax), open-circuit voltage (Voc), and short-circuit current (Isc), making it an essential tool for R&D, manufacturing, and field maintenance of solar systems.
1.1. Package Zviri mukati
Kana wavhura pasuru, iva nechokwadi chekuti zvinhu zvinotevera zviripo:
- 1x ZIBOO FT-1000W Solar Panel Tester MPPT Meter
- 1x Special Test Lead (MC4 connectors)
- 1x Chinyorwa cheMushandisi
- 1x Kutakura Pouch
- 1x Tambo
- 2x Special Interface Wrench Tools
Figure 1: All items included in the ZIBOO FT-1000W package.
2. Key Features
- Professional-Grade PV Testing: Measures maximum power (Pmax) up to 1000W, open-circuit voltage (Voc: 12-80V), and short-circuit current (Isc: 35A) with ±0.8% accuracy.
- MPPT Efficiency Optimization: Tracks Vmp (80V) & Amp (35A) in real-time to identify panel degradation or shading issues.
- Industrial Safety & Durability: Rated CAT III 1000V/CAT IV 600V with double-insulated probes, meeting IEC/EN 61010 standards.
- Smart Data Management: Features data hold and a backlit LCD for reading values in various environments.
- Dhizaini Yakanakira Mushandisi: Auto-ranging simplifies operation, while IP54 dust/water resistance and low-power auto-off ensure reliability.
Mufananidzo 2: Kupfuuraview of the ZIBOO FT-1000W's operational features.
Figure 3: Detailed display of test parameters on the ZIBOO FT-1000W.
3. Zvinyorwa zveUnyanzvi
| Parameter | Value |
|---|---|
| Simba guru (Pmax) | 1000 Watts |
| Open-Circuit Voltage (Voc) | 12-80V |
| Short-Circuit Current (Isc) | 35A |
| Peak Power Voltage (VMP) | 80V |
| Peak Power Current (Amp) | 35A |
| Kururama | ±0.8% |
| Safety Rating | CAT III 1000V/CAT IV 600V, IEC/EN 61010 |
| Dimensions | 5.51"L x 2.99"W x 1.26"H |
| Item Weight | 10.4 ounces |
| Material | Aruminiyamu, Monocrystalline Silicon, Girazi Rakapfava |
| Simba Source | 3x AAA mabhatiri (asina kuisirwa) |
Figure 4: Product dimensions of the ZIBOO FT-1000W.
Figure 5: Comparison of FT-1000W and FT-2000W models.
4. Setup
4.1. Kuiswa kwebhatiri
- Tsvaga nzvimbo yebhatiri kuseri kwemamita.
- Shandisa sikurudhiraivha diki kuvhura chifukidziro chebhatiri.
- Isa mabhatiri maviri eAAA, uchivimbisa kuti polarity (+/-) yakakodzera.
- Tsiva chivharo chebhatiri uye chichengetedze nescuru.
4.2. Kubatanidza Test Leads
The ZIBOO FT-1000W comes with special MC4 test leads for direct connection to solar panels.
- Connect the red test lead to the positive (+) input terminal on the meter.
- Connect the black test lead to the negative (-) input terminal on the meter.
- Ensure the MC4 connectors on the test leads are securely attached to the corresponding connectors on your solar panel or array.
Figure 6: Standard MC4 Test Leads included with the meter.
Figure 7: Special Interface Wrench Tools for MC4 connectors.
Video 1: Demonstrates the connection process of the ZIBOO FT-1000W Solar Panel Tester to a solar panel using MC4 connectors, and shows the device in operation.
5. Operating Instructions
5.1. Simba On / Off
- Kuti ubate: Dzvanya wobata bhatani rekubatidza (U) kwemasekondi angangoita matatu.
- Kudzima: Dzvanya wobata bhatani rekudzima (U) for approximately 2 seconds. The device also features an auto-off function to conserve battery.
5.2. Measurement Modes (Manual/Auto)
The meter offers two measurement modes:
- Auto Mode: Press the AUTO button. The meter will automatically scan and display the PV module's parameters (Pmax, Vmp, Amp, Voc, Isc) every few seconds. This mode is ideal for quick, continuous monitoring.
- Manual Mode: Press the MANUAL button. In this mode, each press of the button initiates a single measurement cycle. Wait for approximately 3 seconds after pressing to allow the measurement to complete and display.
5.3. Data Bata Basa
Kuti uomese kuverenga kwemagetsi kuri pachiratidziro, tinya bhatani rekuti H button. Press it again to release the data hold and resume live readings.
5.4. Kushanda kweMarambi ekumashure
For improved visibility in low-light conditions, press and hold the backlight button (H*) to activate the display backlight. Press and hold again to turn it off.
Figure 8: ZIBOO FT-1000W in operation, displaying real-time solar panel data.
Mufananidzo 9: Mberi view of the ZIBOO FT-1000W meter with accessories.
6. Kuchengeta
- Kuchenesa: Use a soft, dry cloth to clean the meter's exterior. Do not use abrasive cleaners or solvents.
- Kuchengeta: Store the meter and its accessories in the provided carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures.
- Kutsiva Bhatiri: Replace batteries promptly when the low battery indicator appears to ensure accurate readings and prevent damage.
- Kuongorora: Regularly inspect test leads and connectors for any signs of wear or damage. Replace damaged components immediately to ensure safety and performance.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Meter haina simba | Mabhatiri akaderera kana akafa; Kuisa bhatiri zvisirizvo | Tsiva mabhatiri; Tarisa polarity yebhatiri |
| No readings displayed | Incorrect connection to solar panel; Insufficient sunlight; Faulty test leads | Ensure secure and correct connection; Test under adequate sunlight; Inspect and replace test leads if damaged |
| Kurava kusina kururama | Environmental factors (e.g., shading, temperature); Damaged meter or leads | Ensure clear, direct sunlight; Verify connections; Contact support if issues persist |
| Display backlight not working | Backlight function not activated; Low batteries | Press and hold backlight button; Replace batteries |
8. Warranty uye Tsigiro
For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official ZIBOO website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kwezvichemo zvewaranti.
