OKAI Ceetle EA10C Pro Electric Scooter User Manual

1. Nhanganyaya

Welcome to the user manual for your new OKAI Ceetle EA10C Pro Electric Scooter. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

2. Safety Information

Kuchengetedzeka kwako ndiko kwakakosha. Gara uchitevedzera nhungamiro dzinotevera:

• Pfeka Helmet: Always wear an approved helmet and other protective gear (knee pads, elbow pads) when riding.
• Mitemo Yemunharaunda: Familiarize yourself with and obey all local traffic laws and regulations regarding electric scooter use.
• Miganhu Yezera Nehuremu: This scooter is designed for adults. Do not exceed the maximum load capacity of 220 lbs (100 kg).
• Riding Conditions: Avoid riding in heavy rain, snow, ice, or on slippery surfaces. Do not ride at night without adequate lighting.
• Pre-Ride Check: Before each ride, check the brakes, tire pressure, and ensure all quick releases and fasteners are secure.
• Braking: The scooter features a dual braking system (mechanical drum brake + electronic brake). Practice braking in a safe area to understand its response.
• Kuchengetedzwa kweBhatiri: Use only the provided charger. Do not attempt to open or modify the battery pack. Keep the battery away from water and extreme temperatures.
• No Stunts: Do not attempt jumps, stunts, or aggressive riding, as this can lead to injury and damage the scooter.
• Kuziva: Be aware of your surroundings, pedestrians, and other vehicles. Use the ring bell to alert others when necessary.

3. Package Zviri mukati

Upon unpacking your OKAI Ceetle EA10C Pro Electric Scooter, please verify that all the following items are included:

• OKAI Ceetle EA10C Pro Electric Scooter
• Mushandisi Chinyorwa (gwaro iri)
• Battery Charger
• Key
• Tool Kit

If any items are missing or damaged, please contact OKAI customer support immediately.

4. Chigadzirwa Pamusoroview

The OKAI Ceetle EA10C Pro is a seated electric scooter designed for urban commuting. Key components include:

• Handlebar: Features grips, brake levers, throttle, display, and bell.
• Dhijitari Display: Shows speed, battery life, and current speed mode.
• Mwenje wemusoro nemwenje weshure: Zvekuonekwa panguva yakaderera-mwenje mamiriro.
• Foldable Seat: Ergonomically designed for comfort, can be folded for storage.
• Bhatiri Rinobvisika: Located under the seat, allows for convenient off-scooter charging.
• 10-inch Vacuum Tires: Front and rear tires designed for comfort and stability.
• Dual Braking System: Mechanical drum brake and electronic brake for reliable stopping power.
• Kickstand: For parking the scooter.

5. Kugadzwa uye Kubatanidzwa Kwekutanga

5.1 Kupetunura sikuta

1. Isa scooter panzvimbo yakati sandara.
2. Tsvaga nzira yekupeta iri pedyo nepasi pechikamu chekufambisa.
3. Release the locking lever and carefully lift the steering column until it clicks into its upright, locked position. Ensure the lock is fully engaged.
4. Adjust the handlebar height if applicable and secure it.

5.2 Seat Installation/Adjustment

1. If the seat is not pre-installed, attach it according to the diagrams in the quick start guide (not provided here).
2. Adjust the seat height to a comfortable riding position, ensuring your feet can touch the ground when stopped. Secure the seat post clamp zvakasimba.

5.3 Kuchaja Bhatiri Kwekutanga

Before your first ride, fully charge the battery. The battery is removable for convenient charging.

• Remove the battery from its compartment (usually under the seat).
• Connect the charger to the battery's charging port, then plug the charger into a standard wall outlet.
• Mwenje wekuratidza charger unowanzo ratidza ruvara rutsvuku panguva yekuchaja uye unobva waita girini kana wachaja zvizere.
• Kuchaja kwakazara kunotora anenge maawa maviri.
• Once charged, disconnect the charger and re-install the battery securely into the scooter.

5.4 Tire Check

Ensure both 10-inch vacuum tires are properly inflated to the recommended pressure (check tire sidewall for details).

6. Operating Instructions

6.1 Kubatidza/Kudzima

• To power on, press and hold the power button on the display until the screen illuminates.
• Kuti udzime, dzvanya uye ubate bhatani remagetsi zvakare kusvika chiratidziro chadzima.

6.2 Kutasva Sikuta

1. Ensure the scooter is powered on and the battery has sufficient charge.
2. Isa tsoka imwe padheki wobva wasundira rimwe tsoka kuti uwane simba rekutanga.
3. Kana wangofamba, dzvanya zvinyoro nyoro throttle lever kuti ubatidze mota.
4. Adjust your speed using the throttle. The scooter has a top speed of 15.5 mph.
5. To slow down or stop, release the throttle and apply the brake levers.

6.3 Dhijitari Ratidza

The integrated display provides real-time information:

• Kumhanya Kumhanya kwekutyaira kwazvino.
• Hupenyu hwebhatiri: Indication of remaining battery charge.
• Speed ​​​​Mode: Shows the selected riding mode (e.g., Eco, Standard, Sport - specific modes may vary and can be adjusted via the app).

6.4 Braking System

The OKAI Ceetle EA10C Pro is equipped with a dual braking system for effective stopping:

• Mechanical Drum Brake: Operated by a lever on the handlebar.
• Brake yemagetsi: Activated by a separate lever or integrated with the mechanical brake.
• Apply both brakes smoothly and gradually for controlled deceleration. Avoid sudden, hard braking, especially at high speeds.

6.5 OKAI App Integration

Enhance your riding experience by connecting your scooter to the OKAI app via Bluetooth or NFC.

• Dhaunirodha: Tsvaga the "OKAI" app on your smartphone's app store.
• Kubatanidza: Follow the in-app instructions to pair your scooter using Bluetooth or NFC.
• Features: Iyo app inobvumidza iwe kuti:
• View detailed ride statistics.
• Enable/disable cruise control.
• Update scooter firmware.
• Adjust speed modes and other settings.

7. Kuchaja Bhatiri

The OKAI Ceetle EA10C Pro features a removable 47V 10.4Ah battery, allowing for flexible charging options.

1. Bvisa Bhatiri: Unlock and remove the battery pack from its compartment.
2. Batanidza Charger: Plug the charger into the battery's charging port.
3. Batanidza kuSimba: Plug the charger into a standard 100-240V AC wall outlet.
4. Charge Indicator: The charger's LED will typically be red during charging and turn green when the battery is fully charged.
5. Nguva yekuchaja: Kuchaja kwakazara kunotora anenge maawa maviri.
6. Dimbura: Once fully charged, disconnect the charger from the wall outlet first, then from the battery.
7. Re-install Battery: Securely re-install the charged battery into the scooter.

Zvakakosha: Only use the official OKAI charger provided with your scooter. Do not overcharge the battery. Store the battery in a cool, dry place when not in use.

8. Kupeta uye Kuchengeta

8.1 Kupeta Scooter

The OKAI Ceetle EA10C Pro is designed to fold compactly for easy transport and storage.

1. Ita shuwa kuti scooter yakadzimwa.
2. If the seat is adjustable, lower it to its lowest position or fold it down.
3. Locate the folding mechanism at the base of the steering column.
4. Release the locking lever and carefully fold the steering column downwards until it locks into its folded position.
5. Ensure all locking mechanisms are securely engaged to prevent accidental unfolding.

8.2 Kuchengeta

• Chengeta scooter munzvimbo inotonhorera, yakaoma, kure nezuva rakananga uye tembiricha yakanyanya.
• For long-term storage, ensure the battery is charged to approximately 50-70% and recharge it every 1-2 months to maintain battery health.
• Keep the scooter covered to protect it from dust and moisture.

9. Kuchengeta

Kugara kugadziridza kunovimbisa hupenyu hurefu uye kushanda kwakachengeteka kwe scooter yako.

• Kuchenesa: Pukuta scooter ne adamp cloth. Do not use high-pressure water jets or corrosive cleaners. Ensure the charging port is dry before charging.
• Matai: Regularly check tire pressure and for any signs of wear or damage. Maintain recommended pressure for optimal performance and range.
• Mabhureki: Inspect brake levers, cables, and drum brakes periodically. Ensure they respond effectively. If braking performance degrades, have them adjusted by a qualified technician.
• Fasteners: Periodically check all screws, bolts, and quick-release levers to ensure they are tight and secure.
• Battery Care: Avoid fully discharging the battery frequently. Charge it regularly, even if not used often.

10. Kugadzirisa matambudziko

If you encounter issues with your OKAI Ceetle EA10C Pro, refer to the following common problems and solutions:

For issues not listed here or if solutions do not resolve the problem, please contact OKAI customer support.

11. Zvinotsanangurwa

Technical specifications for the OKAI Ceetle EA10C Pro Electric Scooter:

12. Warranty uye Tsigiro

12.1 Yakakwana Warranty

OKAI offers a limited warranty for the Ceetle EA10C Pro Electric Scooter:

• Scooter: Rimwe (1) gore rakaganhurirwa waranti kubva pazuva rekutenga.
• Accessories (e.g., battery, charger): Six (6) months limited warranty from the date of purchase.

This warranty covers manufacturing defects and does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

12.2 Mutengi Tsigiro

For technical assistance, warranty claims, or any questions regarding your OKAI Ceetle EA10C Pro Electric Scooter, please contact OKAI customer support. Refer to the official OKAI websaiti kana zvinyorwa zvako zvekutenga zveruzivo rwazvino.

Zvekushandisa Pamhepo: Visit the official OKAI website for FAQs, additional guides, and support resources.