FeiyuTech SCORP 3 Kit Gimbal Stabilizer Instruction Manual

Nhanganyaya

The FeiyuTech SCORP 3 Kit is a professional-grade gimbal stabilizer designed for DSLR and mirrorless cameras, offering advanced stabilization and intelligent features. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance.

Zvinhu zvakakosha zvinosanganisira:

• Upgraded 7.72lbs payload capacity for heavier camera setups.
• Detachable underslung handle for versatile shooting angles and remote control.
• Built-in AI Tracking 4.0 for intelligent subject tracking without external accessories.
• Widened quick release plate for faster and more secure camera mounting, supporting vertical shooting.
• Comprehensive accessory kit for enhanced functionality.

Chii chiri muBhokisi

The FeiyuTech SCORP 3 Kit includes the following components:

• Feiyu Scorp 3 Gimbal x1
• Kutakura Nyaya x1
• Zadza Chiedza x1
• Weight Reducing Shoulder Strap x1
• Extension Pole x1
• Articulating Arm x1
• USB-C to Type-C Camera Control Cable x1
• USB-C Gimbal Charging Cable x1
• Tripod x1
• L-Bracket Base (Horizontal Mount Plate) x1
• Slider x1
• Lens Support Bracket x1
• Upper Quick Release Plate x1
• Lens Support Screw x1
• Camera Mounting Screw x1
• Rubber Dust Cover x1
• Hex kiyi x1

Gadzirira

1. Gimbal Assembly

Unfold the gimbal and ensure all axis locks are disengaged before powering on. Attach the mini tripod to the bottom of the gimbal handle for stability during setup.

2. Kamera Mounting

1. Attach the quick release plate to the bottom of your camera using the camera mounting screw.
2. Slide the camera with the attached quick release plate onto the gimbal's mounting platform.
3. Secure the camera by tightening the locking lever on the quick release system.

3. Kuenzanisa Gimbal

Proper balancing is crucial for optimal performance and to prevent motor strain. Follow these steps for each axis:

1. Kuyera Kutenderera Kwemugero: Unlock the tilt axis. Adjust the camera forward or backward on the quick release plate until the camera remains level when tilted.
2. Kuenzana kweRoll Axis: Unlock the roll axis. Adjust the horizontal arm left or right until the camera remains level without tilting to either side.
3. Kuenzana kwePan Axis: Unlock the pan axis. Adjust the vertical arm up or down until the camera remains stable when rotated horizontally.

After balancing, ensure all axis locks are re-engaged before powering on the gimbal.

4. Kubatanidza Cables

Use the provided USB-C to Type-C camera control cable to connect your camera to the gimbal for control functions.

Kushandisa Gimbal

1. Simba On / Off

Press and hold the power button to turn the gimbal on or off. The gimbal will automatically initialize and attempt to balance the camera.

2. Gimbal Modes

The SCORP 3 offers various operating modes accessible via the touchscreen or physical buttons:

• Pan Tevera (PF): Camera pans left/right following your hand movements, tilt and roll axes are locked.
• Kukiya Modhi (L): All three axes are locked, keeping the camera pointed in a fixed direction.
• Tevera Modhi (F): All three axes follow your hand movements.
• POV Mode: Mativi ese matatu anotevera mafambiro emaoko ako, zvichikupa maonero emunhu wekutanga.
• Tracking Mode: Utilizes AI tracking to follow a designated subject.

3. Detachable Underslung Handle

The underslung handle can be detached for remote control or low-angle shooting. It provides a comfortable grip and allows for real-time status monitoring.

4. AI Tracking 4.0

The built-in AI module allows for intelligent subject tracking. Activate AI tracking via the gimbal's interface or gesture control. The system can track subjects from up to 59 feet away with a 15% wider field of view.

5. Using the Feiyu SCORP App

Connect the gimbal to the Feiyu SCORP app on your smartphone for additional creative tools, firmware upgrades, parameter settings, and somatosensory remote control.

Maintenance

1. Kubhadhara Battery

The gimbal features a built-in, non-removable battery. Charge the gimbal directly via the Type-C charging port. A full charge provides approximately 14 hours of operation.

2. Kuchenesa nekuchengetedza

Wipe the gimbal with a soft, dry cloth. Avoid using harsh chemicals. Store the gimbal in its carrying case in a dry, cool place when not in use. Ensure all axes are locked before storage.

Kugadzirisa matambudziko

1. Gimbal Not Powering On

• Ita shuwa kuti bhatiri rachajwa zvakakwana.
• Verify the power button is pressed and held for the required duration.

2. Unstable Footage

• Re-check the gimbal balance for all three axes. Improper balance is a common cause of instability.
• Ensure all axis locks are fully disengaged during operation.
• Check for any obstructions preventing free movement of the gimbal arms.

3. AI Tracking Issues

• Ensure the subject is within the recommended tracking range (up to 59ft).
• Verify sufficient lighting and clear visibility of the subject.
• Update gimbal firmware via the Feiyu SCORP app.

Zvinotsanangurwa

Warranty & Support

For warranty information and technical support, please refer to the official FeiyuTech websaiti kana kubata basa ravo revatengi zvakananga. Chengeta risiti yako yekutenga yezvichemo zvewaranti.