Minetom 450W Wall Outlet Electric Space Heater (Model MH-04) User Manual

1. Yakakosha Mirayiridzo Yekuchengetedza

Please read all instructions carefully before using this electric space heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

• Chishandiso ichi ndeche kushandiswa kwemukati chete.
• Usashandise hita iyi mudzimba dzekugezera, nzvimbo dzekuwachira mbatya, kana munzvimbo dzakafanana dzemukati umo mvura inogona kunge iripo.
• Ensure the heater is plugged directly into a 120V wall outlet. Do not use extension cords or power strips.
• Ensure the heater is firmly plugged into the outlet. A loose connection may cause overheating and fire.
• The heater's surface, especially the heating element, becomes extremely hot during operation. Avoid direct contact with hot surfaces to prevent burns.
• Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and away from the sides and rear.
• Usapinze kana kubvumira zvinhu zvekunze kuti zvipinze mhepo inofefetera kana kuti paburi repombi sezvo izvi zvinogona kukonzera kuvhunduka kwemagetsi kana moto, kana kukuvadza hita.
• Do not block air intakes or exhaust openings in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• This heater is equipped with an Overheat Dziviriro System that automatically shuts off the unit if it overheats. If this occurs, unplug the heater, wait 30 minutes for it to cool, and then plug it back in.
• Nguva dzose bvisa hita kana isiri kushandiswa.
• Supervise children and pets when the heater is in operation.

2. Chigadzirwa Pamusoroview

The Minetom 450W Wall Outlet Electric Space Heater is a compact, plug-in heating solution designed for small spaces. It features a digital LED display, adjustable thermostat, and a programmable timer for convenient operation.

Zvinokosha:

• Compact Design: Small size (4.3 x 2.8 x 6.5 inches) for portability and space-saving.
• Simba rekudziyisa re450W: Efficient heating for areas up to 100 square feet.
• Inogadziriswa Thermostat: Allows setting desired temperature from 60°F to 90°F.
• 1-12 Hour Timer: For automatic power on or shut off.
• Akatungamirira Ratidza: Shows current temperature and timer settings.
• 180-Degree Rotatable Plug: For flexible placement in various wall outlets.
• PTC Ceramic Heating Technology: Provides rapid heating.
• Quiet Operation: Designed for low noise levels (approximately 45dB).

3. Zvinotsanangurwa

4. Setup

Follow these steps to set up your Minetom Space Heater:

1. Bvisa zvinhu: Nyatsobvisa hita kubva pakurongedzerwa kwayo.
2. Sarudza Nzvimbo: Select a suitable indoor location with a standard 120V wall outlet. Ensure there are no combustible materials within 3 feet (0.9 meters) of the heater.
3. Plug In: Insert the heater directly into a wall outlet. Do not use extension cords or power strips.
4. Adjust Plug (if needed): The heater features a 180-degree rotatable plug. If the heater is not upright or obstructs other outlets, press the button located under the plug and rotate the heater to the desired position. Release the button to lock it in place. Ensure the heater is firmly seated in the outlet.

5. Operating Instructions

Familiarize yourself with the control panel and follow these steps to operate your heater.

5.1 Simba On/Kudzima

• To turn the heater ON, press the Power button (usually marked with a power symbol) located on the side or front of the unit. The LED display will illuminate.
• To turn the heater DZIMA, press the Power button again. The display will turn off.

5.2 Kuisa Iyo Tembiricha

The heater features a digital thermostat allowing you to set a desired temperature between 60°F and 90°F.

1. With the heater powered on, use the "Temp+" and "Temp-" buttons on the control panel to adjust the desired temperature.
2. The LED display will show the set temperature. The heater will cycle on and off to maintain this temperature.

5.3 Kushandisa Basa reTimer

The timer function allows you to program the heater to automatically turn on or off after a set period (1 to 12 hours).

• Auto Shut-Off Timer:
  1. Ensure the heater is powered ON.
  2. Press the "Timer" button repeatedly to scroll through the desired number of hours (1 to 12).
  3. The LED display will show the selected time. The heater will automatically turn off after the set duration.
• Auto Power-On Timer:
  1. Ensure the heater is powered OFF.
  2. Press the "Timer" button repeatedly to scroll through the desired number of hours (1 to 12).
  3. The LED display will show the selected time. The heater will automatically turn on after the set duration.

6. Kuchengeta

Kugadzirisa kwakakodzera kunovimbisa hupenyu hurefu uye kushanda kwakachengeteka kweheater yako.

• Kuchenesa:
  1. Nguva dzose bvisa hita uye wobvumira kuti itonhore zvakakwana usati wachenesa.
  2. Shandisa nyoro, damp jira rekupukuta pamusoro pekunze kweheater.
  3. Do not use abrasive cleaners, waxes, or polishes as these may damage the finish.
  4. Gently vacuum the air intake and exhaust grilles to remove dust and lint.
  5. Usambofa wakanyika hita mumvura kana kurega mvura ichidonhera mukati.
• Kuchengeta:
  1. Chengetedza hita munzvimbo inotonhorera, yakaoma kana isiri kushandiswa.
  2. Zvinokurudzirwa kuchengeta hita mupakeji yayo yekutanga kuti idzivirire kubva kuguruva nekukuvadzwa.

7. Kugadzirisa matambudziko

Kana ukasangana nematambudziko neheater yako, tarisa kune anotevera matambudziko akajairika uye mhinduro:

8. Warranty uye Tsigiro

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Minetom webwebhusaiti. Unogonawo kubata mutengesi wako kuti akubatsire.

Mugadziri: Minetom

Muenzaniso: MH-04