Bhuku reMushandisi reANYCUBIC Photon Mono M7 PRO nePurifier 2.0

1. Nhanganyaya

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your ANYCUBIC Photon Mono M7 PRO resin 3D printer and the accompanying Purifier 2.0. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Safety Information

Resin 3D printing involves materials and processes that require careful handling. Always adhere to the following safety guidelines:

• Wear appropriate personal protective equipment (PPE), including gloves and safety glasses, when handling resin.
• Operate the printer in a well-ventilated area. The Purifier 2.0 assists with ventilation, but additional airflow is recommended.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place.
• Avoid skin contact with uncured resin. In case of contact, wash thoroughly with soap and water.
• Do not dispose of liquid resin down drains. Cure residual resin under UV light before disposing of it as solid waste.
• Chengeta printa neresin kure nevana nezvipfuyo.
• Iva nechokwadi chekuti magetsi akabatana nemazvo uye akadzika pasi.

3. Package Zviri mukati

Tarisa uone kuti zvese zvirimo mupasuru yako:

• ANYCUBIC Photon Mono M7 PRO 3D Printer
• ANYCUBIC Purifier 2.0
• Power Adapter uye Cable
• Resin Vat
• Vaka Plate
• USB Drive
• Tool Kit (e.g., scraper, Allen wrenches)
• Mushandisi Chinyorwa (gwaro iri)

Image: The ANYCUBIC Photon Mono M7 PRO 3D printer shown alongside the Purifier 2.0 ventilation unit.

4. Setup

4.1 Kusunungura uye Kuisa

1. Nyatsobvisa zvese zvikamu kubva pakurongedza.
2. Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight.
3. Remove any protective films or packaging materials from the printer.

4.2 Purifier 2.0 Connection

The Purifier 2.0 is designed to reduce odors and VOCs during printing. Connect it as follows:

1. Identify the ventilation port on your Photon Mono M7 PRO.
2. Connect the Purifier 2.0's flexible hose to the printer's ventilation port.
3. Extend the exhaust hose from the Purifier 2.0 to an external environment, such as a window, to vent gases effectively.

Image: The ANYCUBIC Purifier 2.0 unit, showing its main body and attached flexible hoses for ventilation.

Image: The ANYCUBIC Photon Mono M7 PRO printer with the Purifier 2.0 connected and its exhaust hose directed out of a window, illustrating proper ventilation setup.

Image: A diagram illustrating the compatibility and installation methods of the Purifier 2.0 with different ANYCUBIC printer series, including direct connection for M7 series and adapter requirements for others.

4.3 Initial Power-On and Leveling

1. Batanidza dhiraivha yemagetsi kune printa woibatanidza mumagetsi.
2. Batidza printer uchishandisa switch yemagetsi.
3. Follow the on-screen instructions for initial setup, including build plate leveling. Refer to the quick start guide for detailed leveling procedures.

5. Operating Instructions

5.1 Kugadzirira Model Yako Yekudhinda

1. Install a compatible slicing software (e.g., Anycubic Photon Workshop) on your computer.
2. Import your 3D model (STL, OBJ format) into the slicing software.
3. Adjust print settings such as layer height, exposure time, and support structures. The Photon Mono M7 PRO supports high-speed printing up to 170mm/h with high-speed resin and 130mm/h with standard resin.
4. Slice the model and save the generated file kune USB drive.

Image: A visual comparison demonstrating the ANYCUBIC Photon Mono M7 PRO's printing speed of up to 170mm/h, significantly faster than other printers shown at 150mm/h.

5.2 Kutanga Kudhinda

1. Ensure the resin vat is clean and securely installed.
2. Pour resin into the vat, ensuring it is below the maximum fill line.
3. Insert the USB drive with your sliced model into the printer's USB port.
4. On the printer's touchscreen, select your model file and initiate the print.
5. The Purifier 2.0 will activate automatically or can be manually started to manage fumes.

5.3 Advanced Features

• 14K High-Precision LCD: The 14K monochrome LCD screen (13312*5120 resolution, 16.8 × 24.8 µm XY resolution) allows for printing intricate details, including holes as small as 0.3 mm in diameter.
• COB LighTurbo 3.0: This advanced light source system, combined with Fresnel lenses and front-facing reflectors, achieves a light angle within 3° and light uniformity exceeding 90%. It includes a light-off compensation algorithm to enhance printing success rates.
• Circulation Heating: The printer features a circulation heating system designed to maintain an optimal printing temperature, which is crucial for consistent resin performance and print quality.

Image: A side-by-side comparison of a highly detailed 3D print achieved with the M7 Pro LightTurbo 3.0 Light Source versus a print with general precision from another COB light source, highlighting the superior resolution.

Image: A table comparing key specifications of the Photon Mono M7 Pro (LightTurbo 3.0, 0.15mm minimum forming diameter, ≤3° minimum precision light angle, ≥90% light uniformity, Dynamic Light-off Compensation) against other printers.

Image: A diagram illustrating the internal circulation heating system of the Anycubic Photon Mono M7 Pro, designed to maintain optimal printing temperature, contrasted with a standard resin printer without this feature.

6. Kuchengeta

6.1 Kuchenesa Printer

• After each print, carefully remove the build plate and clean off any residual resin.
• Use isopropyl alcohol (IPA) and a soft cloth to clean the build plate and printer surfaces.
• Inspect the FEP film in the resin vat for damage or cured resin particles. Replace the FEP film if necessary.
• Never use sharp objects to scrape the FEP film or LCD screen.

6.2 Resin Handling and Storage

• Filter unused resin from the vat back into its original bottle using a mesh filter.
• Store resin bottles in a cool, dark, and dry place, away from direct sunlight.
• Ensure resin bottles are tightly sealed to prevent contamination and premature curing.

6.3 Purifier 2.0 Maintenance

• Regularly check the filter in the Purifier 2.0 and replace it as recommended by the manufacturer to maintain optimal performance.
• Keep the hoses clear of obstructions.

7. Kugadzirisa matambudziko

Ichi chikamu chinotarisa zvinowanzoitika zvaungasangana nazvo. Kuti uwane mamwe matambudziko akaoma, ndapota taura nerutsigiro rwevatengi.

7.1 Print Failures

• Model not sticking to build plate: Re-level the build plate, increase bottom exposure time, or ensure the room temperature is adequate.
• Partial prints or layers missing: Check for insufficient supports, incorrect exposure settings, or resin contamination.
• Deformed prints: Verify print orientation, support placement, and ensure the FEP film is not damaged.

7.2 Printer Haisi Kupindura

• Ensure the power cable is securely connected and the power switch is on.
• Tangazve printer.
• Check the USB drive for corruption or incompatible file formats.

7.3 Purifier Not Working

• Verify the power connection to the Purifier 2.0.
• Check if the filter is clogged and needs replacement.
• Ensure hoses are not kinked or blocked.

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

ANYCUBIC products come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ANYCUBIC website. For technical support, troubleshooting assistance, or spare parts, please contact ANYCUBIC customer service through their official channels.