1. Ruzivo Rwakakosha Chekuchengetedza
Ndapota verenga mirayiridzo yose zvakanyatsonaka usati wasangana uye kushandisa. Chengetedza bhuku rino kuti ugozoshandisa mune ramangwana.
- Always follow assembly instructions precisely to ensure structural integrity.
- This chair weighs approximately 12.16 kg (26.8 lbs). Exercise caution and seek assistance when lifting or moving to prevent injury.
- The maximum weight capacity for this chair is 150 kg (330 lbs). Do not exceed this limit.
- Keep all small parts and packaging materials away from children and pets to avoid choking hazards.
- Ita shuwa kuti ese screws uye fasteners zvakasimbiswa zvakachengeteka usati washandisa. Nguva nenguva tarisa uye simbisa zvakare sezvinodiwa.
- Usamire pachigaro kana kuchishandisa sechigaro chematanho.
- Avoid placing the chair near open flames or excessive heat sources.
2. Package Zviri mukati
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Chair Frame Components (Arms, Backrest, Seat Base)
- Seat Cushion
- Back Cushion / Pillow
- Hardware Pack (Screws, Allen Wrench)
3. Mirayiridzo yeGungano
Assembly typically requires one person and approximately 15-30 minutes. A soft, clean surface is recommended for assembly to prevent scratching components.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface.
- Batanidza Mafuremu Emativi: Identify the left and right armrest frames. Align them with the seat base and backrest frame. Secure using the provided screws and Allen wrench. Ensure screws are inserted correctly; if a screw does not fit, try swapping the armrest sides.
- Simbisa maFasteners ese: Once all frame components are loosely assembled, gradually tighten all screws until secure. Do not overtighten.
- Nzvimbo dzeCushions: Position the seat cushion onto the seat base. Place the back cushion/pillow against the backrest.
- Kuongorora Kwekupedzisira: Gently rock the chair to ensure stability. If any wobbling occurs, re-check all connections and tighten screws as necessary.
Figure 3.1: Product Dimensions and Weight Capacity. This image illustrates the overall dimensions of the chair and its maximum weight capacity.
Figure 3.2: Product Detail. This image highlights key features such as cushion thickness, removable cover, and foot protection.
4. Operating Instructions
The U-MAX Accent Chair is designed for comfortable seating in various indoor environments.
- Kugara: Sit gently on the chair, distributing your weight evenly. The ergonomic design provides support for relaxation.
- Kuiswa: Position the chair on a flat, stable surface. The anti-slip felt foot padding helps protect floors.
- Movement: When moving the chair, lift it rather than dragging to prevent damage to the chair or your flooring.
Figure 4.1: U-MAX Accent Chair in a Living Room. This image shows the chair in a typical usage environment.
5. Kuchengeta uye Kuchengeta
Proper care will extend the life and appearance of your U-MAX Accent Chair.
- Faux Leather Upholstery:
- Wipe spills immediately with a clean, dry cloth.
- Pakuchenesa kwakajairika, shandisa soft, damp cloth with mild soap and water. Avoid harsh chemicals or abrasive cleaners.
- Do not expose to direct sunlight for prolonged periods to prevent fading and material degradation.
- Wood Frame:
- Wipe the wood frame with a soft, dry cloth.
- Avoid using silicone-based polishes or cleaners, as they can build up over time.
- Makushikiti: The pillow cover is removable via zipper for easy cleaning. Follow care instructions on the label if available.
- Hardware: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
6. Kugadzirisa matambudziko
If you encounter any issues with your chair, refer to the following common solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chair is wobbly or unstable. | Loose screws kana kusaenzana kusangana. | Ensure all screws are fully tightened. Place the chair on a flat surface and apply gentle pressure to each corner to identify and correct any unevenness. |
| Screws do not fit during assembly. | Incorrect orientation of parts (e.g., left armrest on right side). | Verify that all components are oriented correctly according to the assembly steps. Try swapping the left and right armrest frames. |
| Manzwi ekuchema. | Kubatana kusina kusimba kana kukweshana pakati pezvikamu. | Re-tighten all screws. If squeaking persists, apply a small amount of silicone lubricant to the joints. |
7. Zvinotsanangurwa
| Brand | U-MAX |
| Model Number | SS13080UBR |
| Color | Bhurawuni |
| Material | Faux Leather (Upholstery), Walnut Wood (Frame) |
| Zviyero zvechigadzirwa (Zvose) | 74.9 cm (D) x 64.7 cm (W) x 73 cm (H) / 29.5" (D) x 25.5" (W) x 28.75" (H) |
| Item Weight | 12.16 kg (26.8 lbs) |
| Maximum Weight Capacity | 150 kg (330 lbs) |
| Special Feature | Arm Rest, Removable Cushion Cover |
| Back Style | Mid Back |
Figure 7.1: High-Density Sponge Detail. This image illustrates the quality of the cushion's internal material.
8. Ruzivo rweWaranti
Specific warranty details for the U-MAX Accent Chair (Model SS13080UBR) are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product listing on the retailer's website or contact U-MAX customer support directly.
9. Mutengi Tsigiro
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact the retailer where you purchased the product or visit the official U-MAX websaiti yerutsigiro yekuonana ruzivo.
For general inquiries, you may also visit the U-MAX store page on Amazon: U-MAX Store on Amazon
