ATEN Command Line Interface

Zvinotsanangurwa

• Chigadzirwa: ATEN Kudzora System
• Basa rekuita: Tonga kure kure ATEN controllers uye mabhokisi ekuwedzera kuburikidza neSSH/Telnet

Mirayiridzo Yekushandiswa Kwechigadzirwa

Kugadzira SSH/Telnet Session

1. Dhawunirodha SSH/Telnet mutengi sePuTTY pakombuta ine mukana weATEN controller kana Bhokisi Rekuwedzera.
2. Mhanyai mutengi akadhawunirodha.
3. Yechikamu cheSSH:
   • Zita reHost / IP kero: Pinda iyo inotarirwa controller kana yekuwedzera bhokisi re IP kero kana zita remuenzi.
   • Type yekubatanidza: SSH
   • Chiteshi: 22
4. Zvesesheni ye telnet:
   • Zita reHost / IP kero: Pinda iyo inotarirwa controller kana
     bhokisi rekuwedzera IP kero kana zita remugamuchiri.
   • Type yekubatanidza: Zvimwe> Telnet
   • Chiteshi: 23
5. Dzvanya Vhura uye tevera pa-screen mirairo kuti upinde.

SSH/Telnet Mirairo

Help Command

• Kushandisa: Ratidza mirairo yekugonesa iyo CLI modhi yemutongi.
• Syntax: help
• Bvuma: Raira OK - Basa rakaitwa; Mirairo isiriyo - Haina kuurayiwa
• Example: rubatsiro: ratidza rairo yeCLI modhi

Kugonesa / Kudzima Echo Mhinduro

• Kushandisa: Bvumira kana kudzima mhinduro otomatiki kune mameseji anogamuchirwa.
• Syntax: maungira[control]
• Parameter: control: on - gonesa; kudzima - kudzima (default yadzimwa)
• Bvuma: Raira OK - Basa rakaitwa; Mirairo isiriyo - Haina kuurayiwa
• Example: ndiani pa: isa controller kuti ipindure otomatiki kune yakagamuchirwa mameseji.

Kugadzirisa Telnet Timeout Interval kana Login

• Kushandisa: Gadzira zvigadziriso zveTelnet CLI mode.
• Syntax: telnet[timeout interval][login control]
• Parameter: nguva yekubuda: Telnet nguva yekupedza nguva yekumisikidza; login: Telnet login basa rekugadzirisa
• Bvuma: Raira OK - Basa rakaitwa; Mirairo isiriyo - Haina kuurayiwa
• Example: telnet timeout 0 : gadzirisa nguva yekupedza nguva kuti isambopera nguva

Kugadzirisa Seri Port Settings

• Kushandisa: Dzora uye gadzirisa serial port marongero.

Mibvunzo Inowanzo bvunzwa (FAQ)

Mubvunzo: Chii chandinofanira kuita kana chikamu cheSSH/Telnet chisingagoni kugadzwa?
A: Kana iyo sesheni isingagone kugadzikiswa, pinda kune mudziyo manejimendi console kuti utarise kana kiyi yekuwana ichida kuchinjwa.

Nezve Iri Gwaro
Iri gwara rinopa ruzivo pane iripo SSH uye Telnet mirairo yekudzora kure ATEN controller uye mabhokisi ekuwedzera.

ZVINOKOSHA: Kugadzirisa kunoitwa kuburikidza nemirairo-mutsara interface inozonyorwa kana purojekiti file inoiswa kuburikidza neATEN Configurator (GUI) mushure.

Kugadzira SSH/Telnet Session

1. Pakombuta inokwanisa kuwana yakanangwa ATEN controller kana Expansion Bhokisi, dhawunirodha SSH/Telnet mutengi, eg PuTTY.
   Cherechedza: Kuti uwane iyo yekuisa, tsvaga "dhawunirodha putty" mu web browser.
2. Mhanyai mutengi akadhawunirodha.
3. Kuti umise chikamu cheSSH, shandisa marongero anotevera.
   

   Munda	Setting
   Zita reHost / IP kero	IP kero kana zita remugadziri wechinangwa chekutonga kana bhokisi rekuwedzera
   Connection Type	SSH
   Port	22

   For example:

4. Kugadzira musangano we telnet, shandisa marongero anotevera.
   

   Munda	Setting
   Zita reHost / IP kero	IP kero kana zita remubati reanotariswa controller kana bhokisi rekuwedzera
   Connection Type	Zvimwe > Telnet
   Port	23

   For example:

5. Dzvanya Vhura uye uteedzere mirairo yepa-screen kuti uise zvitupa zvekupinda. Chikamu chinotangwa. For example:

Cherechedza: Kana iyo sesheni isingagone kusimbiswa, pinda mumudziyo manejimendi koni kuti uone kana kiyi yekupinda ichida kuchinjwa.

SSH/Telnet Mirairo

Help

• Kushandisa:
  Ratidza rairo yekugonesa iyo CLI modhi yemutongi.
• Syntax:
  help↙
• Bvuma:
  Raira OK↙ : Raira rakarurama uye basa rinoitwa.
  Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.
• Example:
  help↙ : ratidza rairo yeCLI modhi

Kugonesa / Kudzima Echo Mhinduro

• Kushandisa:
  Gonesa kana kudzima mutongi kuti apindure otomatiki kune anogamuchirwa mameseji.
• Syntax:
  echo[control]↙
• Parameter:
  control : on -gonesa basa iri
  kudzima - dzima basa iri (default yadzimwa)
• Bvuma:
  Raira OK↙ : Raira rakarurama uye basa rinoitwa.
  Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.
• Example:
  eho on↙ : isa mutongi kuti apindure otomatiki kune akagamuchirwa mameseji.

Kugadzirisa Telnet Timeout Interval kana Login

• Kushandisa:
  Gadzira zvigadziriso zveTelnet CLI mode.
• Syntax:
  telnet[timeout interval][login control]↙
• Keyword
  nguva yekubuda : Telnet nguva yekupedza nguva yekumisikidza
  login: Telnet login basa rekugadzirisa
• Parameter:
  interval : nguva yekupedza muminiti. (0 zvinoreva kusambopera nguva) (default ndeye 5)
  control : on - gonesa login basa (default iripo)
  off - disable login basa
• Bvuma:
  Raira OK↙ : Raira rakarurama uye basa rinoitwa.
  Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.
• Example:
  telnet timeout 0↙ : gadzirisa nguva yekupedza nguva kuti isambopera nguva
  telnet timeout 5↙ : gadzirisa nguva yekubuda kusvika kumaminitsi mashanu
  telnet login off↙: dzima basa rekupinda

Kugadzirisa Seri Port Settings

Kushandisa:
Dzora uye gadzirisa serial port marongero.

Syntax:
serial [p sequence] [type stype] [baud baudrate] [dbit databit] [parity sparity] [sbit stopbit] [fctrl flowctrl] [dtype datatype] [endchar chars] [checksumtype checksumtype] [acktimeout duration] [control "data" ] [rubatsiro]↙d

Keyword:

• p: chiteshi
• mhando: serial mhando
• baud : baud rate
• dbit: data bit
• parity : serial parity
• sbit : mira zvishoma
• fctrl: kudzora kuyerera
• dtype: rudzi rwe data
• acktimeout : nguva yekupedza nguva (ms) inoshandiswa kumirira mhinduro kubva kune sendack control.
• endchar : specific end character inoshandiswa kuratidza meseji yakazara.
• checksumtype : kana uchida fw ku auto-calculate command checksum, govera rudzi rwe checksum
• rubatsiro: ratidza mirairo

Parameter:

• kutevedzana: chiteshi, chakaparadzaniswa necomma kune akawanda madoko * (ese madoko)
• mhando: 232, 422, 485 (default 232)
• baudrate : 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (default 9600)
• Databit: 7, 8 (yagara iripo 8)
• sparity: hapana, kunyangwe, zvisingaite (default hapana)
• stopbit: 1, 2 (default 1)
• flowctrl: hapana, hw (default hapana)
• Datatype: ascii, hex (default ascii)
• checksumtype: hapana, modbus (default hapana)
• nguva: yakatarwa nguva yekupera (ms)(default 300)
• chars : magumo mavara anotevera meseji yakazara.
• control : verenga - ratidza yakagamuchirwa meseji yeiyo chaiyo serial port
• nyora - tumira data kubva kune serial port. Shandisa " chiratidzo chinovhara data. Shandisa \x chiratidzo kutumira Hex kodhi
• sendack - tumira data kubva kune serial port uye ratidza yakagamuchirwa meseji

Bvumakumucheto:
Raira OK↙ : Raira rakarurama uye basa rinoitwa.
Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.

Example:

• Seri rubatsiro ↙ : ratidza mirairo
• serial p01 ↙ : ratidza ruzivo rwekuseta ye serial port1.
• serial p* ↙ : ratidza ruzivo rwekuseta yeese serial ports.
• serial p01 mhando 232 baud 115200 dbit 8 parity hapana sbit 1 fctrl hapana ↙: gadzirisa port1.
• serial p01,04,07 baud 19200 ↙ : gadzirisa port1, 4, 7 kune baud rate 19200.
• serial p02 baud 19200 ↙ : gadzirisa port2 kune baud 19200 uye shandisa zvigadziriso zvemamwe ma paramita.
• serial p02 dtype hex verenga ↙ : ratidza meseji yakagamuchirwa ye port2 muHEX fomati.
• serial p03 nyora "sw i01 o02\r\n" ↙ : tumira zvinyorwa zve ASCII 'sw i01 o02' kubva paport3.
• serial p03 sendack “sw i01 o02\x0D\x0A” ↙ : tumira mavara eASCII 'sw i01 o02' kubva paport3 uye ratidza mhinduro.

Kugadzirisa Relay Port Settings

Kushandisa:
Dzora uye gadzirisa relay ports.

Syntax:
relay [p sequence] [tpulse duration] [control] [rubatsiro] ↙

Keyword:

• p: chiteshi
• tpulse: nguva yakavharwa yepulse
• rubatsiro: ratidza mirairo

Parameter:

• kutevedzana: chiteshi, chakaparadzaniswa necomma kune akawanda madoko
• * (zvese zviteshi)
• nguva: nguva yenguva mumillisecond.
• control : vhura - dzima
• kuvhara - vhura
• pulse - vhara relay chiteshi wozovhura
• toggle - relay toggle
• verenga - kuratidza chimiro

Bvuma:
Raira OK↙ : Raira rakarurama uye basa rinoitwa.
Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.

Example:

• relay rubatsiro ↙ : ratidza mirairo
• relay p01 kuvhara ↙ : kuvhara port1 chiteshi.
• relay p01 vhura ↙: vhura port1 chiteshi.
• relay p01,04,07 close ↙ : close port 1, 4, 7 relay channels.
• relay p02 tpulse 500 pulse ↙: vhara port2 500ms wobva wavhura.
• relay p02 verenga ↙: ratidza port2 mamiriro.

Kugadzirisa I/O Port Settings

Kushandisa:
Dzora uye gadzirisa I / O ports.

Syntax:
io [p sequence] [type iotype] [lthresh threshold] [hthresh threshold] [tpulse duration] [control] [rubatsiro]↙

Keyword:

• p: chiteshi
• lthresh : chikumbaridzo chakaderera
• hthresh : yakakwirira-yakasungwa chikumbaridzo
• tpulse: nguva iyo I / O inoramba iri muzinga repamusoro mumhepo yekufema
• rubatsiro: ratidza mirairo
• CHERECHEDZA: Kana parameter isina kutaurwa, kukosha kwakambopinda kuchaiswa.
• Parameter:
• kutevedzana: chiteshi, chakaparadzaniswa necomma kune akawanda madoko
• * (zvese zviteshi)
• iotype : yakaoma, vdc, dout
• chikumbaridzo : trigger threshold in voltage
• nguva: nguva yenguva mumillisecond.
• control : vhura
• pedyo
• pulse
• toggle
• verenga

Bvuma:
Raira OK↙ : Raira rakarurama uye basa rinoitwa.
Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.

Example:

• io rubatsiro ↙ : ratidza mirairo
• io p01↙ : ratidza ruzivo rwekuseta yeI/O port1.
• io p*↙ : ratidza ruzivo rwekuseta yeese I/O ports.
• io p01 mhando yakaoma ↙ : gadzirisa port 1 kuti iome kubata maitiro.
• io p01 mhando dout ↙ : gadzirisa port 1 kune dijitari yekubuda mode.
• io p01 mhando vdc lthresh 1 hthresh 3 ↙ : gadzirisa port 1 kusvika vdc modhi ine zvikumbaridzo marongero.
• io p01 vhura ↙: vhura port1 chiteshi.
• io p01 kuvhara ↙ : vhara port1 chiteshi.
• io p01,04,07 kuvhara ↙ : kuvhara port1,4,7 chiteshi.
• io p02 tpulse 500 pulse ↙: vhara port2 chiteshi 500ms wobva wavhura.
• io p02 verenga ↙: ratidza port2 mamiriro.

Kugadzirisa IR Settings

Kushandisa:
Dzora uye gadzirisa IR ports.

Syntax:
ir [p sequence] [type irtype] | [baud baudrate] [dbit databit] [parity sparity] [sbit stopbit] [dtype datatype] [checksumtype checksumtype] [dzora "data"] [rubatsiro] ↙

Keyword:

• p: chiteshi
• mhando: yakabuda mhando yeyakananga yekubuda port
• baud** : chiyero chebhadhi
• dbit** : data bit
• parity** : serial parity
• sbit** : mira zvishoma
• dtype ** : rudzi rwe data
• checksumtype** : Controller/extension box inotora otomatiki rudzi rwakatarwa rwecheki
• rubatsiro: ratidza mirairo

CHERECHEDZA:
* : Iri kiyi izwi ndere IR mhando
** : Aya mazwi makuru ndeye 232 mhando

Kana parameter isina kutaurwa, kukosha kwakambopinda kuchaiswa.

Parameter:

• kutevedzana: chiteshi, chakaparadzaniswa necomma kune akawanda madoko * (ese madoko)
• irtype: ir, 232 (default ir)
• baudrate : 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (default 9600)
• databit: 7, 8 (default 8)
• sparity: hapana, kunyangwe, zvisingaite (default hapana)
• stopbit : 1, 2 (default 1)
• Datatype: ascii, hex (default ascii)
• checksumtype: hapana, modbus (default hapana)
• kudzora: nyora - tumira IR kodhi kana RS232 data

Bvuma:
Raira OK↙ : Raira rakarurama uye basa rinoitwa.
Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.

Example:

• ir help ↙ : ratidza mirairo
• ir p01 ↙ : ratidza ruzivo rwekuseta yeIR port1.
• ir p* ↙ : ratidza ruzivo rwekuseta yeese IR ports.
• ir p01,04,07 mhando 232 ↙ : gadzirisa port1,4,7 kune RS232 mhando
• ir p01 mhando 232 baud 115200 dbit 8 parity hapana sbit 1 checksum mhando modbus↙: gadzirisa port1 kune RS232 mhando uye zvigadziriso
• ir p02 nyora dtype hex "0a0b0c" ↙: tumira hex fomati data 0a0b0c kubva pachiteshi2
• ir p02 baud 19200 ↙ : gadzirisa port2 kune baud 19200 uye shandisa zvigadziriso zvemamwe ma paramita.
• ir p02 nyora "sw i01 o02\r\n" ↙ : tumira zvinyorwa zve ASCII 'sw i01 o02' kubva paport2.
• ir p02 nyora “sw i01 o02\x0D\x0A”↙ : tumira zvinyorwa zve ASCII 'sw i01 o02' kubva paport2.

Reboot

Kushandisa:
Reboot the controller.

Syntax:
reboot↙

Bvuma:
Raira OK↙ : Raira rakarurama uye basa rinoitwa.
Raira zvisirizvo↙ : Raira uye/kana paramita hazvina kunaka uye hazvina kuurayiwa.

Example:
reboot↙ : reboot mudziyo

Zvinyorwa / Zvishandiso

ATEN Command Line Interface [pdf] Bhuku reMushandisi Command Line Interface, Line Interface, Interface

References

• User Manual