cod m V1.2 ZigBee Coordinator
Zvinotsanangurwa
- Product: cod.m ZigBee Coordinator V1.2
- Muenzaniso: Art. Nhamba 90810
- Mugovera Voltage: 5V USB-C, max 0.8W PoE 802.3af max 1W
- Ambient Temperature: Inokodzera kushandiswa kwemukati
- Dziviriro Kirasi: IP20
- Dimensions: Housing 64 x 74 x 22mm
- Kurema 48g incl. housing, without antenna
- Maitiro: IEEE 802.3 LAN, IEEE 802.11 WLAN, IEEE 802.15.4 ZigBee, IEEE 802.2af Power over Ethernet
Features
- CC2652P7 Texas Instruments multiprotocol2.4GHz radio module
- ZigBee 3.x, Z-Stack firmware (Koenkk)
- Compatible with zigbee2mqtt (z2m), Home Assistant (zha), ioBroker, etc. Automatic detection by Home Assistant (zha)
- Operation via LAN, Wi-Fi or USB
- PoE (802.3af) or USB-C powered Less than 1W power consumption
- ESP32 open source firmware (cod.m XZG fork) https://github.com/codm/czc-fw/
- CC2652P7 firmware update via web interface, device firmware update via web interface or USB-C (Auto-BSL)
- Role selectable via web interface: coordinator, router, thread border router (under development)
- 3D-printed case, can also be used for wall-mounting (CC-BY-NC-SA)
- 9cm external antenna, included
- Made in Germany, CE, RoHS, WEEE
Hardware
The flashing power LED (green) indicates that the device is ready for operation. When a connection has been established by the host application, the power LED (green) lights up continuously. When pairing of the ZigBee host application (zigbee2mqtt, zha, etc.) is switched on, the ZigBee LED (yellow) lights up. The button can be used to switch the operating mode between LAN/WLAN and USB. When USB mode is switched on, the mode LED lights up (red). When using WLAN, please follow the instructions at https://docs.codm.de/en/zigbee/coordinator/ USB power has priority over PoE power and can be plugged in at any time without interruption. The coordinator restarts when switching back to PoE.
Kutuma
- Screw the supplied antenna onto the antenna connection.
- Connect the code.m ZigBee Coordinator (CZC) to the Ethernet and/or USB-C power supply unit. When using Power over Ethernet*, the USB power supply unit is not required.
- When the green LED flashes, the coordinator is ready for operation.
- Read the DHCP IP in the router and access it via the browser: http://192.168.xx.xx/. Alternatively, use mDNS and access the coordinator at http://czc-xxxx.local. The host name can be found on the product sticker on the back of the housing.
- No further configuration is required for operation. Individual settings and operating modes can be made in the web operating modes can be made in the web interface.
* only in PoE version
Configuration
- https://lnk.codm.de/zigbee-90810-setup-z2m-en
- https://lnk.codm.de/zigbee-90810-setup-iob-en
- https://lnk.codm.de/zigbee-90810-setup-ha-en
Chinangwa chekushandisa
This cod.The ZigBee Coordinator (CZC) module is intended to provide a ZigBee interface (coordinator) via Ethernet, WLAN or USB. Only the specified intended use is permitted. Any other use will invalidate the warranty and liability.
Notes
Hereby, cod.m GmbH declares that the radio equipment type cod.m ZigBee Coordinator V1.2 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://lnk.codm.de/zigbee-90810-ce Keep the module away from heat and sunlight. Avoid contact with dust and the influence of liquids. Only use the module indoors. Protect the module from electrostatic discharge.
Technical data
| Kudimburira | cod.m ZigBee Coordinator V1.2, Art. No. 90810 | Dimensions: | Housing 64 x 74 x 22mm | |
| Mugove voltage: | 5V USB-C, max 0.8W
PoE 802.3af max 1W |
Kurema | 48g incl. housing, without antenna | |
| Ambient tembiricha: | +5 bis +45°C | Maitiro: | IEEE 802.3 LAN
IEEE 802.11 WLAN IEEE 802.15.4 ZigBee IEEE 802.2af Simba pamusoro peEthernet |
|
| Dziviriro kirasi: | IP20 |
Contact
- cod.m GmbH
- Allendorfer Straße 56
- 35708 Haiger
- Managing Director: Patrik Mayer
- Local Court Wetzlar, HRB 6686
- +49 2773 91878-0
- https://www.codm.de
- https://shop.codm.de
- UST-ID: DE815516311
- WEEE-Reg.-No.: DE78677954
- Tsigira kuburikidza support@codm.de, no telephone support!
Mibvunzo Inowanzo bvunzwa
Q: Can the cod.m ZigBee Coordinator V1.2 be used outdoors?
A: No, the module is designed for indoor use only.
Mubvunzo: Ndeipi iyo yakanyanya kupa voltage inotsigirwa nemudziyo?
A: The device supports a maximum supply voltage of 5V through USB-C or 0.8W PoE 802.3af.
Zvinyorwa / Zvishandiso
 |
cod m V1.2 ZigBee Coordinator [pdf] Bhuku reMuridzi 90810, V1.2 ZigBee Coordinator, V1.2, ZigBee Coordinator, Coordinator |